中温炻器天目油滴釉的研制及影响因素的探讨

详细介绍了中温炻器辊遭窑烧成天目油滴釉的研制情况，对该产品的釉料组成，主要工艺参数，形成机理及影响因素进行了探讨分析，并指出该釉面产品具有广阔的市场前景。     

A comparison of lightness contrast effects in CRT and surface colours

The simultaneous contrast effect is investigated in this article. A total of 174 and 154 test/induction combinations were studied for CRT and surface colours respectively. Each combination was assessed by nine observers using a matching technique. The test and induction colours used for CRT colours were similar to surface colours using fabric samples. The results indicated a strong lightness contrast effect for both CRT and surface media; that is, the lightness of a test colour surrounded by a lighter induction colour was reduced for both CRT and surface colours. However, the effect in CRT medium was more pronounced than in the surface medium. © 2004 Wiley Periodicals, Inc. Col Res Appl, 30, 13–20, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20074     

CMOS图像传感器在视频监控系统中的应用

介绍了CMOS图像传感器的工作原理、总体结构,并具体介绍了一种CMOS图像传感器MT9M001的内部结构、特点及应用.在此基础上给出了CMOS图像传感器MT9M001在视频监控系统中的具体应用实例.该设计在低成本的条件下具有图像质量好、图像分辨率高等显著特点,具有较宽的应用范围和较高的研究价值.     

准噶尔盆地三台-北三台地区第三系勘探潜力分析

从沉积及储层组合、油气运移系统等方面全面剖析了准噶尔盆地三台-北三台地区第三系油气成藏条件，建立了成藏模式，对未钻探区勘探潜力进行了预测；通过分析，认为该区第三系储层物性主体差，断裂更多地表现为封闭性，导致沟通深部油气源的运移体系不畅，致使第三系圈闭不能有效捕获和储集油气。圈闭又比较匮乏，主体勘探潜力不大。北25井西背斜紧邻多期活动的甘诃子北断裂，第三系可能发育较好的储层，相对有利，北25井西背斜应是钻探第三系的首选目标。     

大港渣油掺兑催化油浆氧化沥青的研究

重油催化裂化外甩油浆中富含芳烃，可望在国产原油生产优质道路沥青上发挥作用。对大港环烷基渣油中掺兑一定比例的油浆后氧化改善道路沥青性质的可能性进行了研究，结果表明：渣油掺兑油浆氧化，不仅可以有效改善沥青延度，同时也为油浆的合理利用开辟了一条新途径。     

高速列车风量控制式通风系统的探讨

介绍了能够减轻乘坐高速列车时产生的耳朵不适感的风量控制式通风系统，该系统通过检测车内外的压力来控制进排气量，并且由模拟计算证实，该系统能够控制车内压力的波动，满足高速列车的舒适性需要。     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.     

建筑陶瓷企业实施精益生产研究

分析了建筑陶瓷企业实施精益生产的条件和当前推行精益生产的主要障碍，对应用中存在的问题进行了分析并提出了相关建议。     

Efficient Legendre moment computation for grey level images

Legendre orthogonal moments have been widely used in the field of image analysis. Because their computation by a direct method is very time expensive, recent efforts have been devoted to the reduction of computational complexity. Nevertheless, the existing algorithms are mainly focused on binary images. We propose here a new fast method for computing the Legendre moments, which is not only suitable for binary images but also for grey level images. We first establish a recurrence formula of one-dimensional (1D) Legendre moments by using the recursive property of Legendre polynomials. As a result, the 1D Legendre moments of order p, L_p=L_p(0), can be expressed as a linear combination of L_p-1(1) and L_p-2(0). Based on this relationship, the 1D Legendre moments L_p(0) can thus be obtained from the arrays of L₁(a) and L₀(a), where a is an integer number less than p. To further decrease the computation complexity, an algorithm, in which no multiplication is required, is used to compute these quantities. The method is then extended to the calculation of the two-dimensional Legendre moments L_pq. We show that the proposed method is more efficient than the direct method.