Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

High-performance nanocomposites based on polyetherketones

Polyetherketones, PEKs, are an important family of high-performance thermoplastic materials that display a unique combination of toughness, stiffness, thermooxidative stability, chemical and solvent resistance, flame retardancy, and retention of physical properties at high temperatures. A relevant step forward in the development of these materials has been the recent incorporation of nanofillers to extend their utility in advanced technological applications. This review provides an extensive overview of the research on PEK-based nanocomposites with a special emphasis on both carbon-based nanofillers, such as nanotubes or nanofibers, and inorganic nanoparticles. Nanocomposites can be fabricated by simple, low-cost conventional techniques such as extrusion and compression molding, generally combined with pre-processing stages involving mechanochemical treatments in organic solvents. Different strategies employed to efficiently incorporate carbon nanofillers into these matrices, including polymer functionalization, covalent grafting and nanofiller wrapping in compatibilizing systems are described. The analysis of the influence of the preparation and processing conditions as well as the nanofiller type, attributes and loading on the structure and properties of the resulting materials is also considered. Composites incorporating carbon nanofillers display remarkably improved thermal stability, electrical and thermal conductivity as well as mechanical property enhancements compared to the neat polymers. On the other hand, the incorporation of inorganic nanoparticles such as WS₂, SiO₂ or Al₂O₃ significantly enhances the tribological properties of the matrix, mainly the coefficient of friction and wear resistance. Finally, current and potential applications of these multifunctional nanocomposite materials in fields such as medicine, telecommunications, electronics, aerospace, automobile and chemical industries are described.     

A decomposition-based approach for the selection of standardized modular containers

The standardisation of packaging and containers for product handling has potential benefits from transportation, material handling and environmental perspectives. Likewise, standardised modular containers play an important role in the Physical Internet (PI). To support implementation of standard modular containers, we introduce a mathematical model to select a requisite number of modular containers to pack a set of products to maximise space utilisation. A decomposition-based solution methodology is developed and presented. Computational results from industry-based problem instances indicate that using standardised modular containers results in increased space utilisation at the unit load level. This finding substantiates the use of modular containers in moving toward the PI.     

Nutrient Recommendations for Growing-up Milk: A Report of an Expert Panel

Utilization of expert recommendations in the development of food and beverage nutritional profiles represents an opportunity to merge science and food manufacturing to deliver nutritionally optimized products into the marketplace. This report details expert panel guidelines for the design of a nutritional product for children one to six years of age. This interaction demonstrates the essential synergy between academia and food manufacturers in translating nutrient recommendations to food for their delivery to a population. Important factors for such translation are the identification of applicable nutrient recommendations and selection of an appropriate delivery matrix. This report demonstrates the translation of expert nutritional recommendations to a milk-based product for children—one to six years of age.     

Moving beyond ‘more crop per drop’: insights from two decades of research on agricultural water productivity

ABSTRACT

Concern over increasing water scarcity has led to the introduction of the concept of agricultural water productivity and an emphasis on interventions to achieve ‘more crop per drop’. Yet, a strong debate continues on how the concept is to be defined and used. Drawing largely from the irrigation literature, the origins of the concept and its methodological developments are reviewed, and its use in applied work over two decades is discussed. Based on this analysis of conceptual and applied research, key insights into the concept’s contributions and limitations are presented, as well as opportunities for further refinements.     

3D Printing technologies for drug delivery: a review

With the FDA approval of the first 3D printed tablet, Spritam®, there is now precedence set for the utilization of 3D printing for the preparation of drug delivery systems. The capabilities for dispensing low volumes with accuracy, precise spatial control and layer-by-layer assembly allow for the preparation of complex compositions and geometries. The high degree of flexibility and control with 3D printing enables the preparation of dosage forms with multiple active pharmaceutical ingredients with complex and tailored release profiles. A unique opportunity for this technology for the preparation of personalized doses to address individual patient needs. This review will highlight the 3D printing technologies being utilized for the fabrication of drug delivery systems, as well as the formulation and processing parameters for consideration. This article will also summarize the range of dosage forms that have been prepared using these technologies, specifically over the last 10 years.     

“Virtual Design Studio”—Part 1: Interdisciplinary design processes

The “Virtual Design Studio (VDS)” is a software platform currently under development in support of an integrated, coordinated and optimized design of buildings and their energy and environmental systems. It is intended to assist collaborating architects, engineers and project management team members throughout from the early phases to the detailed building design development. The platform helps to facilitate the workflow and the processing of information in combination with appropriate, task-based performance simulation tools as further analyzed in Part 2 of this study (DOI: 10.1007/s12273-013-0111-1). The present paper summarizes how VDS relates to the building design process and its typical project stages, performance-based design considerations and respective performance optimization strategies. It outlines the methodology and scope for the organization, implementation and respective requirements for the VDS platform development based on the interdisciplinary design needs. Part 2 will present the methodology for the systems integration and software implementation of VDS.     

Restoring the ruins: the social context of reconstruction in the countrysides of Northern France in the aftermath of the great war

The reconstruction of devastated farms, villages and market towns in northern France was not masterminded by the state or carried out by its emergency agencies, which were concerned with filling trenches, removing shells, restoring farmland and patching up ruins. Segments of French society needed to mobilize themselves to declare their losses and claim compensation from the state. Proposals by French trades unionists to bring in German building workers to reconstruct rural settlements were rejected. Instead, general purpose reconstruction co‐operatives were established, first in Lorraine and then throughout the régions dévastées. It is argued that the differing attitudes to religion and trades unionism in the countryside of northern France were reflected in the varying efforts made to effect rural reconstruction during the 1920s. The dream of international labour solidarity through reconstruction was not realized. Rather, restoration of northern France was undertaken by private construction companies, often contracted to general‐purpose co‐operatives.