Optimal design of CMOS pseudoactive pixel sensor (PAPS) structure for low-dark-current and large-array-size imager applications

In this paper, a pixel structure called the optimal pseudoactive pixel sensor (OPAPS) is proposed and analyzed for the applications of CMOS imagers. The shared zero-biased-buffer in the pixel is used to suppress both dark current of photodiode and leakage current of pixel switches by keeping both biases of photodiode and parasitic pn junctions in the pixel bus at zero voltage or near zero voltage. The factor of photocurrent-to-dark-current ratio per pixel area (PDRPA) is defined to characterize the performance of the OPAPS structure. It is found that a zero-biased-buffer shared by four pixels can achieve the highest PDRPA. In addition, the column sampling circuits and output correlated double sampling circuits are also used to suppress fixed-pattern noise, clock feedthrough noise, and channel charge injection. An experimental chip of the proposed OPAPS CMOS imager with the format of 352/spl times/288 (CIF) has been designed and fabricated by using 0.25-/spl mu/m single-poly-five-level-metal (1P5M) N-well CMOS process. In the fabricated CMOS imager, one shared zero-biased-buffer is used for four pixels where the PDRPA is equal to 47.29 /spl mu/m/sup -2/. The fabricated OPAPS CMOS imager has a pixel size of 8.2/spl times/.2 /spl mu/m, fill factor of 42%, and chip size of 3630/spl times/3390 /spl mu/m. Moreover, the measured maximum frame rate is 30 frames/s and the dark current is 82 pA/cm/sup 2/. Additionally, the measured optical dynamic range is 65 dB. It is found that the proposed OPAPS structure has lower dark current and higher optical dynamic range as compared with the active pixel sensor (APS) and the conventional passive pixel sensor (PPS). Thus, the proposed OPAPS structure has high potential for the applications of high-quality and large-array-size CMOS imagers.     

A fault-tolerant wormhole routing scheme for torus networks with nonconvex faults

In this paper, we present a fault-tolerant routing algorithm for torus networks by using only 4 virtual channels. The proposed algorithm is based on the solid fault model, which includes rectangular faults and many practical nonconvex faults. Previous works need at least 6 virtual channels to achieve the same fault-tolerant ability.     

Boundary effects on the optical properties of InGaN multiple quantum wells

We examine the issues of spontaneous and piezoelectric polarization discontinuity on the optical properties of 3.0-nm-thick indium gallium nitride (InGaN) multiple quantum wells (MQWs). A quench of band-edge emission from the cap GaN layer is observed when the photoexcitation source is changed from a 355- to a 248-nm laser. The interband transitions from the InGaN wells exhibit a linear dependence on the 1) spectral blue shift of /spl sim/8.5/spl times/10/sup -18/ meV /spl middot/ cm/sup 3/ and 2) change of the internal field of /spl sim/3/spl times/10/sup -14/ meV /spl middot/ cm/sup 2/ with the injected carrier density up to N/sub inj//spl sim/10/sup 19/ cm/sup -3/ at 77 K. These observations are attributed to the redistribution of photogenerated carriers in the InGaN wells due to the polarization discontinuity at the QW interface and the surface band bending effect. By incorporating an additional boundary condition of surface Fermi-level pinning into the Poisson equation and the band-structure analysis, it is shown the emission from the InGaN-GaN MQWs is dominant by the recombination between the high-lying subbands and the screening of internal field effects.     

Design, optimization, and performance analysis of new photodiode structures for CMOS active-pixel-sensor (APS) imager applications

The dark current in the active-pixel-sensor (APS) cell of a CMOS imager is known to be mainly generated in the regions of bird's beak after the local oxidation of silicon process as well as the surface damage caused by the implantation of high doping concentration. Furthermore, shallow and deep pn-junctions can improve the photo-sensitivity for light of short and long wavelengths, respectively. In this paper, two new photodiode structures using p-substrate and lightly-doped sensor implant SN- as pn-junction photodiode with the regions of bird's beak embraced by SN- and p-field implants, respectively, are proposed and analyzed to reduce dark current and enhance the overall spectral response. 5 /spl mu/m/spl times/5 /spl mu/m APS cells fabricated in a 0.35-/spl mu/m single-poly-triple-metal (1P3M) 3.3-V CMOS process are designed by using the proposed photodiode structures. As shown from the experimental results, the two proposed photodiode structures of 5 /spl mu/m/spl times/5 /spl mu/m APS cells have lower dark currents of 30.6 mV/s and 35.2 mV/s at the reverse-biased voltage of 2 V and higher spectral response, as compared to the conventional structure and other photodiode structures. Thus, the two proposed new photodiode structures can be applied to CMOS imager systems with small pixel size, high resolution, and high quality.     

Shear Lag Effect in Simply Supported Prestressed Concrete Box Girder

In this paper, derivation and computed formulas are provided for the shear lag coefficient in a simply supported prestressed concrete box girder under dead load. In the case of prestressed tendons having parabolic configurations, formulas to compute the shear lag effect are also developed. The magnitude of upward loading intensity caused by prestress as well as the relationship between the height of the box girder and the sag of prestressed tendons have been fully treated. Conclusions are drawn that the shear lag effect caused by dead load and prestress force is equivalent to dead load acting alone, provided that the prestressed tendon is set up with a parabolic profile. Shear lag effect caused by movable load is also analyzed according to the eccentricity of the load to the half-width ratio of the box girder. Charts were prepared to predict the shear lag coefficient for live load. Finally, having considered the shear deformation of flanges, the deflection of box girders is studied for both uniformly distributed load and concentrated load. Examples are given for illustrative purpose.     

A microprocessor‐based electrohydraulic servo system

Abstract

A microprocessor‐based electrohydraulic servo system has been constructed and tested. It is implemented with an 8‐bit single‐chip microcomputer to control a hydraulic motor. The control algorithm is based on variable structure control principles. The experimental results show that the system is under good control and possesses a great potential for electrohydraulic servo control.     

Properties of osteoconductive biomaterials: Calcium phosphate cement with different ratios of platelet-rich plasma as identifiers

This study aims to evaluate further the performance of a platelet-rich plasma (PRP) additive incorporated with calcium phosphate bone cement (CPC) in vitro to prove its efficiency as bone graft substitutes and its compatibility to be incorporated into the CPC with other techniques in clinical restoration in vivo. The growth factor release ability and the osteogenic evaluation of PRP, CPC, and PRP/CPC testing groups with 5, 10, and 15 wt.% PRP were compared in vitro. Four groups were measured using non-decalcified staining methods in vivo, which include the testing group of 10 wt.% PRP/CPC selected from the evaluation in vitro, by using both the autograft with rabbit trabecular and CPC-only as comparison groups and the group without grafting material as the control sample. The results obtained through specimen immersion show that growth factor release and alkaline phosphatase activities after osteoprogenitor cell culture had a significantly better effect on 10 and 15 wt.% PRP/CPC than on the other groups in vitro. Analysis results suggest that PRP was still retained in the CPC matrix even after 32 days of immersion. The results in vivo show that the histology of the autograft bone and the control group without grafting material exhibited fibrous connective and adipose tissues, which obviously filled the created cavity even at nine weeks after the operation. Osteoregeneration was more successful in the PRP-additive group, which accumulated bone remodeling than in the other groups. In conclusion, CPC could be a potential carrier with adequate PRP additives that bear a therapeutic potential for enhanced bone tissue regeneration.     

A Galerkin isoparametric finite element analysis of acoustic field in lined ducts

Abstract

A Galerkin based finite element method is used to solve acoustic pressure distribution in unlined or lined ducts of arbitrary profile with circular cross section. For isoparametric elements with cubic polynomials as shape functions, two elements per wavelength is proved necessary to keep solution error within 2.5%. Several examples are solved to show the capability of the derived technique, and the results, are good.     

Composite hydrogeological investigation and characterisation methods applied at a nuclear power plant site in Taiwan

Drawing from the lessons learnt from the Fukushima nuclear disaster in Japan, the assessment of subsurface environmental hazard around nuclear power plants has emerged as a critical task. Consequently, aiming to better understand the possible environmental impact of radiation leaks into the groundwater, a prescreening programme was initiated in 2011 by the Taiwanese government. As part of this programme, this study conducted various borehole prospecting techniques to identify in situ hydrogeological characteristics at Chin‐Shan Nuclear Power Plant. Borehole electrical log, sonic log and temperature/conductivity log were conducted to explain the regional lithologic conditions and permeability of the formation. In conjunction with this, the interwell tracer and pumping test was carried out to simultaneously determine the hydraulic parameters. In our opinion, the implementation of such in situ end‐to‐end investigations is essential in interpreting in situ fluid and solute transport dynamics prior to programming any numerical scheme for early warning, vulnerability assessment and regular monitoring of a nuclear power plant site.