On the Growth of Thin-Film AlGaN/GaN Epitaxial Heterostructures on Hybrid Substrates Containing Layers of Silicon Carbide and Porous Silicon

Semiconductors - Abstract—In our work, we carry out a structural-spectroscopic study of AlGaN/GaN epitaxial layers grown by molecular-beam epitaxy with nitrogen-plasma activation on a hybrid...     

Effect of ZnO layer thickness upon optoelectrical properties of NiO/ ZnO heterojunction prepared at room temperature

In this work, p-NiO/n-ZnO heterostructures were successfully prepared at room temperature using RF sputtering technique. The influence of ZnO layer thickness on the performance of the heterojunction was investigated. The deposited ZnO layers have a hexagonal Wurtzite structure with preferable growth orientations along (002) and (103) for thinner films. Increasing the thickness results in more crystallographic orientation randomness. The current–voltage measurements of the realized heterojunctions showed a clear rectifying behavior. The measured ideality factor varies from 2.5 to 1.6 according to the thickness of ZnO layer. The series resistance of the device is enlarged with increasing ZnO thickness. The deduced parameters from the I–V characteristics suggest that 200 nm is the optimal thickness of the ZnO layer according to our experimental conditions. We attribute the relatively better performance of this thickness to achieving reasonable compensation between serial resistance and ideality factor. The best heterojunction was tested and successfully used as a UV detector.     

Vibration of clamped moderately thick general cross-ply plates using a generalized Navier approach

A hitherto unavailable analytical solution to the free vibration problem of general cross-ply laminated rigidly clamped rectangular plates, incorporating first-order shear deformation, and rotatory and in-plane inertias into the formulation, is presented. A recently developed boundary continuous displacement-based generalized Navier solution technique is used to solve the five highly coupled linear second-order partial differential equations with constant coefficients, and the associated geometric boundary conditions. The assumed solution functions are in the form of double Fourier series, which satisfy the rigidly clamped boundary conditions a priori in a manner similar to the conventional Navier method. Convergence characteristics of the natural frequencies of both symmetric and antisymmetric cross-ply plates are numerically established. Other numerical results presented herein include (i) comparison with the corresponding available first-order shear deformation theory-based Galerkin and classical lamination theory-based boundary-discontinuous analytical solutions, and (ii) study of the effects of thickness and aspect ratio on the natural frequencies.     

Uncertainty modeling and robust minimax LQR control of multivariable nonlinear systems with application to hypersonic flight

For a class of multi‐input and multi‐output nonlinear uncertainty systems, a novel approach to design a nonlinear controller using minimax linear quadratic regulator (LQR) control is proposed. The proposed method combines a feedback linearization method with the robust minimax LQR approach in the presence of time‐varying uncertain parameters. The uncertainties, which are assumed to satisfy a certain integral quadratic constraint condition, do not necessarily satisfy a generalized matching condition. The procedure consists of feedback linearization of the nominal model and linearization of the remaining nonlinear uncertain terms with respect to each individual uncertainty at a local operating point. This two‐stage linearization process, followed by a robust minimax LQR control design, provides a robustly stable closed loop system. To demonstrate the effectiveness of the proposed approach, an application study is provided for a flight control problem of an air‐breathing hypersonic flight vehicle (AHFV), where the outputs to be controlled are the longitudinal velocity and altitude, and the control variables are the throttle setting and elevator deflection. The proposed method is used to derive a linearized uncertainty model for the longitudinal motion dynamics of the AHFV first, and then a robust minimax LQR controller is designed, which is based on this uncertainty model. The controller is synthesized considering seven uncertain aerodynamic and inertial parameters. The stability and performance of the synthesized controller is evaluated numerically via single scenario simulations for particular cruise conditions as well as a Monte‐Carlo type simulation based on numerous cases. It is observed that the control scheme proposed in this paper performs better, especially from the aspect of robustness to large ranges of uncertainties, than some controller design schemes previously published in the literature. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Effect of substrate bias on the properties of plasma deposited organosilicone (pp-HMDSN) thin films

Organosilicone thin films have been deposited by plasma polymerization (pp) in a plasma enhanced chemical vapor deposition (PECVD) system using hexamethyldisilazane (HMDSN:C6H19Si2N) as a monomer precursor, at different biases of the stainless-steel substrate holder. The substrate bias affected film thickness, surface morphology, chemical composition and photoluminescence (PL) emission. For a negatively biased substrate, it is found that the film thickness is the minimum, while the porosity and PL emission are the maximum. For a positively biased substrate, the thickness and the ratio of Si/N are the maximum which correspond to a blue shift of the PL emission in comparison with the case of non-biased grounded substrate. In addition, the characterization of the plasma using a single cylindrical Langmuir probe has been performed to obtain information about both the electron density and the positive ion energy, where it can be concluded that the ion energy plays a major role in determining film thickness.     

Nonlinear robust state feedback control system design for nonlinear uncertain systems

This paper presents a systematic approach to the design of a nonlinear robust dynamic state feedback controller for nonlinear uncertain systems using copies of the plant nonlinearities. The technique is based on the use of integral quadratic constraints and minimax linear quadratic regulator control, and uses a structured uncertainty representation. The approach combines a linear state feedback guaranteed cost controller and copies of the plant nonlinearities to form a robust nonlinear controller with a novel control architecture. A nonlinear state feedback controller is designed for a synchronous machine using the proposed method. The design provides improved stability and transient response in the presence of uncertainty and nonlinearity in the system and also provides a guaranteed bound on the cost function. An automatic voltage regulator to track reference terminal voltage is also provided by a state feedback equivalent robust nonlinear proportional integral controller. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of gamma irradiation on structural,morphological and optical properties of thermal spray pyrolysis deposited CuO thin film

This study reports the influences of gamma irradiation (GI) in the range of 20–100 kGy on CuO thin films via thermal spray pyrolysis technique on the glass substrates. The results demonstrate significant influences of GI on the crystallographic, microstructural and optical characteristics of CuO thin films. The obtained XRD results showed that the crystallinity of the films deteriorates by gradually decreasing crystallite size (from 59.13 to 46 nm) as applied gamma doses increases. However, the basic monoclinic crystal structure remains same. The dislocation density and lattice strain increased with the rise of GI absorbed dose due to the creation of defects. The values of number of crystallites per unit surface area increased as dose increased indicating the abundance of crystallization of nano CuO thin films. A UV–Vis–NIR spectrophotometer was utilized to determine the optical properties and obtained results indicated that the optical energy band gap (OBG) energies reduced from 2.00 to 1.72 eV as the doses increased from 0 to 100 kGy. No distinctions of the monoclinic phase of virgin CuO thin film have been perceived under applied absorbed doses, notwithstanding the slight deterioration of the crystallinity and narrowing the OBG.     

Nanomedicine-Based Delivery Strategies for Breast Cancer Treatment and Management

Breast cancer is one of the most common types of cancer among women globally. It is caused by mutations in the estrogen/progesterone receptors and conventional treatment methods are commonly utilized. About 70–80 percent of individuals with the early-stage non-metastatic disease may be cured. Conventional treatment is far less than the optimal ratio, as demonstrated through the high mortality rate of women with this cancer. However, conventional treatment methods like surgery, radiotherapy, and chemotherapy are not as effective as expected and lead to concerns about low bioavailability, low cellular uptake, emerging resistance, and adverse toxicities. A nanomedicine-based approach is a promising alternative for breast cancer treatment. The present era is witnessing rapid advancements in nanomedicine as a platform for investigating novel therapeutic applications and modern intelligent healthcare management strategies. This paper focuses on nanomedicine-based therapeutic interventions that are becoming more widely accepted for improving treatment effectiveness and reducing undesired side effects in breast cancer patients. By evaluating the state-of-the-art tools and taking the challenges involved into consideration, various aspects of the proposed nano-enabled therapeutic approaches have been discussed in this review.     

Effect of Atmospheric Ageing on the Properties of Organosilicon (Pp-HMDSO) Thin Films

Silicon - This study reports the effect of ageing on plasma polymerized hexamethyldisiloxane (pp-HMDSO) thin films properties during 90 days storage in the atmosphere. The monitoring of...