UNSTRUCTURED FINITE-VOLUME METHOD FOR RADIATIVE HEAT TRANSFER IN A COMPLEX TWO-DIMENSIONAL GEOMETRY WITH OBSTACLES

The radiative heat transfer in a complex two-dimensional enclosure with obstacles with participating medium is very important in practical engineering applications. In order to deal with this problem, in this study the finite-volume method (FVM) for radiation has been derived using the unstructured grid system. A general discretization equation was formulated by introducing the directional weight and the step scheme for spatial differencing. For its comparison and validation, two test cases, an equilateral triangular enclosure and a square enclosure with baffle, were chosen. Then, more complex and practical cases, such as a semicircular enclosure with cylinder hole, a square enclosure with finned internal cylinder, and a furnace with embedded cooling pipes, were investigated. All the results obtained by the unstructured FVM agreed very well with the exact solutions as well as the results obtained by the zone method. Furthermore, the wiggling behavior occurring in the blocked-off FVM was not produced by the unstructured FVM. Three types of manipulation of control angle overlap were also examined here. It was found that the solutions depended on the type of manipulation of control angle overlap, especially when the number of control angles was small. Usually, both the pixelation method and exact treatment introduced here yielded better solutions than the bold approximation.     

Size control of Pb-based glass powders between 38 and 84 nm in the flame spray pyrolysis

Nano-sized Pb-based glass powders with different mean size, ranging from 38 to 84 nm were prepared by flame spray pyrolysis. The mean sizes of the glass powders were controlled by changing the concentration of spray solution. The glass powders prepared by flame spray pyrolysis from the spray solutions with different concentration had broad peaks at around 28° in the XRD patterns. The dielectric layers formed from the glass powders with the mean size of 38 nm had dense inner structures at firing temperatures of 480 and 520°C. On the other hand, the dielectric layer formed from the glass powders with the mean size of 84 nm had some voids inside the layer. The transmittances of the dielectric layer formed from the glass powders with the mean sizes of 38 and 84 nm were each 91% and 74% at firing temperature of 480°C.     

Strong correlation between the cation ordering and magnetic properties of anodically electrodeposited Mn–Co–O nanocrystals

The rock salt-to-spinel structural transformation that occurs in anodically electrodeposited Mn–Co–O nanocrystals involves a rearrangement of Mn/Co cations from octahedral interstices to tetrahedral interstices. The cation ordering process leads to distinct magnetic properties. Curie temperature (T _C) and blocking temperature (T _B) increase dramatically with annealing temperature (200–400 °C), while the corresponding change in particle size for the oxide nanocrystals is rather small. A strong correlation between the magnetic properties and the cation ordering degree in annealed Mn–Co–O nanocrystals was established. These unique magnetic properties can be attributed to the magnetic moment changes induced by Mn/Co cation ordering from octahedral interstices to tetrahedral interstices in the annealed Mn–Co oxide nanocrystals.     

Caulerpa lentillifera inhibits protein-tyrosine phosphatase 1B and protects pancreatic beta cell via its insulin mimetic effect

Food Science and Biotechnology - The aim of this study was to determine whether Caulerpa lentillifea extract (CLE) can protect pancreatic beta cells and enhance insulin signaling in adipocytes. We...     

Comparison of the antioxidant activities of roasted and explosive puffed coffees

We investigated the explosive process effect on antioxidant activities of coffee bean. The total polyphenol contents of powdered extract of explosive puffing coffee bean at 0.75 MPa (PEP 7.5) and powdered extract of explosive puffing coffee bean at 0.9 MPa (PEP 9.0) were at a significantly higher than that of the powdered extract of roasting coffee bean (PER) (P < 0.05). PEP 7.5 showed the highest levels of 3‐CQA (86.23 μg mg^?1), 4‐CQA (43.71 μg mg^?1), and 5‐CQA (31.66 μg mg^?1), and PEP 9.0 had also similar levels of chlorogenic acids, with 3‐CQA (77.99 μg mg^?1), 4‐CQA (43.71 μg mg^?1), and 5‐CQA (30.32 μg mg^?1). PEP 7.5 and PEP 9.0 showed relatively higher antioxidant capacities in DPPH, ABTS, taurine, FRAP, and β‐carotene/linoleic acid assays. PEPs partly recovered the HepG2 cell damage induced by t‐BOOH. These results suggest that puffed coffee has beneficial health effects, and could be used for the development of novel processed coffee products.     

The finite element analysis of a fractured tibia applied by composite bone plates considering contact conditions and time-varying properties of curing tissues

This paper addresses the use of composite bone plates in healing long-bone fractures such as transverse fractures of the tibia using finite element analysis, that takes into consideration contact conditions and material property variations of calluses in relation to the healing period. For the time-varying properties of calluses in relation to the healing period, stepwise material properties were imposed on the callus part based on the time elapsed, and the loading conditions were coupled with the callus properties based on the length of the healing period. The strain distributions at the fracture site were calculated according to the stacking sequence of the bone plate and healing time. The analysis results showed that composite bone plates with stacking sequences of [0]_12T for the Kevlar/BCP composites generated the most appropriate strain distributions at the fracture site during the early healing process.     

Experimental research on thermal comfort in the university classroom of regular semesters in Korea

This research has investigated physical variables affecting indoor thermal comfort and subjective responses of thermal comfort of students in a university in Korea in which the weather is oceanic temperate climate, and has been performed to contribute to the research fields of Sustainable Thermal Standard and Adaptive Thermal Comfort (ATC). This research is based on the ISO 7730-2005 standard and the ATC theories and 4 main variables of PMV such as dry bulb temperature (Ta), relative humidity (RH), black bulb temperature (Tg), and air velocity (Va) are measured once a week during two regular semesters. A clothing insulation, a thermal sensation vote (TSV), an acceptability of thermal environment, and a preference for cooling and heating are investigated at the same time using a questionnaire. This study was carried out for 26 weeks during the spring season, from March to June 2009, and the autumn season, from September to December 2009. The main achievements of this study are as follows. Monthly Mean Outdoor Temperature (MMOT) and Operative Temperature (OT) in the classroom during research periods are 7.4∼23.3°C and 17.5∼29.0°C, respectively. The acceptability ratio of thermal environment shows over 80% when the range of OT in the classroom is 17∼25°C, and the range can be applicable to operative index of heating and cooling of classroom. The mean TSV of respondents is almost “neutral (0)” when the PMV in the classroom moves to “neutral (0)” and “slightly cool (−1)”, and the TSV is almost “+1.5” when the PMV moves to “slightly warm (+1)”. The acceptability ratio of thermal environment is slightly different from ASHRAE Standard 55-2004. So it is necessary to more investigate standard range of acceptability of thermal environment in oceanic temperate climate region using much more databases.     

Quasi-isotropic bending responses of metallic sandwich plates with bi-directionally corrugated cores

In order to reduce anisotropic behaviors of sandwich plates with open channel cores under the bending load, bi-directionally corrugated cores were introduced. Bi-directionally corrugated core has two additional design parameters related with a corrugation pass than uni-directionally corrugated core, so that its properties with respect to core orientations can be controlled. Sandwich plate with bi-directionally corrugated core is designed optimally so that beam buckling of face sheets is reduced drastically and anisotropic buckling behavior in the face sheets is minimized. The cores fabricated by a sectional forming process were bonded with face sheets by adhesive bonding. Three-point bending experiments were carried out with respect to core orientations. It has been shown from the experiments that sandwich plates with bi-directionally corrugated cores exhibit quasi-isotopic bending behaviors and structural performances in sandwich plates.     

Characterization of the field-effect conductivity distribution in pentacene thin-film transistors by a near-field scanning microwave microscope

Direct probing of the conductivity distribution in organic materials is motivated by the need to obtain a deeper understanding of carrier behavior in organic thin-film transistors (OTFT), organic electro-luminescent devices, organic photoconductors, and organic biosensors. Here we used a near-field scanning microwave microscope to visualize conductivity profiles in OTFT channel. Applying this technique to pentacene field-effect transistors has revealed changes of the conductivity distribution in the channel arising from the development and exhaustion of an accumulated charge region. The electric field profiles, the complementary image of conductivity profiles, which are visualized by using an optical second harmonic generation method, support the results. We anticipate that direct observation by this microwave method will find wide application in measurement of carrier conductivity in organic and nonorganic materials.     

Nonlinear finite element method models for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions—Part II: Stiffened panels

The present paper (Part II) is a sequel to the previous paper (Part I) [Paik JK, Seo JK. Nonlinear finite element method models for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions—Part I: Plate elements. Thin-Walled Struct 2008, this issue, doi:10.1016/j.tws.2008.08.005.] on the application of nonlinear finite element methods for ultimate strength analysis of steel stiffened-plate structures under combined biaxial compression and lateral pressure actions. In contrast to Part I dealing with plate elements, the present paper (Part II) treats stiffened panels surrounded by strong support members such as longitudinal girders and transverse frames. In similar to Part I, some important factors of influence such as structural dimensions, initial imperfections, loading types and computational techniques in association with ultimate limit states are studied. Some useful insights in terms of nonlinear finite element method modeling are developed using ANSYS code together with the ALPS/ULSAP semi-analytical method, the latter being for the purpose of a comparison.