Traumatic vertebral arterial dissection and vertebrobasilar arterial thrombosis successfully treated with endovascular thrombolysis and stenting

A case of traumatic extracranial vertebral arterial dissection leading to vertebrobasilar thrombosis and respiratory compromise requiring mechanical ventilation was managed with intraarterial thrombolysis and stenting of the vertebral intimal dissection. In contrast to similar, previously reported cases, this critically ill patient made a full recovery, returning to his job as a secondary school teacher.     

Drift hole mobility in strained and unstrained doped Si1-xGex alloys

Results of the drift hole mobility in strained and unstrained SiGe alloys are reported for Ge fractions varying from 0 to 30% and doping levels of 10¹⁵-10¹⁹ cm^-3. The mobilities are calculated taking into account acoustic, optical, alloy, and ionized-impurity scattering. The mobilities are then compared with experimental results for a boron doping concentration of 2×10¹⁹ cm^-3. Good agreement between experimental and theoretical values is obtained. The results show an increase in the mobility relative to that of silicon     

Principles of lymphogenic and hematogenous metastasis and metastasis classification

A subpopulation of rabbit polyclonal anti-idiotypic antibody (anti-Id) was previously produced to a murine monoclonal antibody (mAb) (M1875) specific for the bluetongue virus core protein VP7. In this report, mimicry of VP7 by this anti-Id (designated RAb2-A) was functionally analyzed through immunization of Balb/c mice with RAb2-A or purified VP7. Animals immunized with RAb2-A were able to produce an M1875-like Ab3 antibody response with idiotype and epitope specificity resembling that of M1875 without subsequent exposure to the nominal antigen. This conclusion was supported by experiments showing that the RAb2-A-induced Ab3 antibodies (i) reacted specifically with the immunizing anti-Id; (ii) were capable of binding VP7; (iii) inhibited M1875 from binding to VP7; and (iv) inhibited M1875 from binding to RAb2-A. Similarly, mice immunized with purified VP7 also produced antibodies that exhibited characteristics such as idiotype and epitope specificity in common with M1875. No antibody response to VP7 was detected in control groups of mice immunized with either normal rabbit IgG or BHK-21 cell components. Therefore, it can be concluded that rabbit anti-Id RAb-2-A mimics an M1875-defined VP7 epitope sufficiently to function as a surrogate antigen for inducing an anti-bluetongue virus response.     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

Position-sensitive superheated-liquid-droplet neutron dosimeter

The one-dimensional (1D) position-sensitive superheated-liquid-droplet dosimeter (SLDD) has been fabricated and tested in the laboratory. The 1D SLDD is fabricated from a 9.525-mm OD, 6.35-mm ID, 20-cm long, Plexiglas-walled tube filled with a mixture of superheated-liquid Freon droplets and host medium glycerol. Washer-shaped piezoelectric acoustic transducers are positioned at both ends of the tube; they determine the number and positions of the acoustic events when the superheated-liquid droplets evaporate upon neutron irradiation. The SLDD is irradiated with the ¹³⁷Cs and ⁶⁰Co γ-sources, as well as ²⁵²Cf neutron source to test for its radiation response and spatial resolution. The SLDD based on the Freon-134a superheated-liquid droplets operating at 20°C and 1 atm is found to be ideal for measuring absorbed neutron dose. This study also proves that the positions of the radiation-induced nucleation acoustic events can be linearly determined from the differences in the transmission times received by the acoustic transducers on the 1D SLDD. The spatial resolution of the neutron depth-dose is 1 mm due the finite response time (1 μs) of the piezoelectric acoustic transducers.     

20-nm optical wavelength conversion using nondegenerate four-wavemixing

Wavelength conversion of optical signals over 20 nm is demonstrated using highly nondegenerate four-wave mixing in a semiconductor traveling-wave optical amplifier. This technique has the potential for extremely-high-speed operation and allows continuous tuning of both input and output wavelengths over the amplifier gain bandwidth. It is demonstrated that, even for such a large wavelength conversion range, it is possible to obtain conversion efficiencies in excess of -10 dB and high extinction ratios. The feasibility of the technique is demonstrated by system measurements at 622 Mb/s, showing a 1.1-dB power penalty at 10^-9 bit error rate (BER)     

Interaction of charged particle flows with plasmons in two-dimensional electron gas

The theory of interaction of charged particle beams with 2D electron gas, located in the field of the delta-like potential wallU(y) =U _oδ(y) has been developed. The kinetic equation for plasmons in 2D electron gas was obtained; the conditions of arising of their instability are given and the corresponding expressions for the increment of plasmons are found.     

A high-speed gateable image pipeline

We present the performance of a high-speed gateable vacuum image pipeline, which permits individual images to be delayed and selected from continuous non-repetitive image stream. This device is composed of a vacuum tube equipped with a photocathode at one end, a phosphor screen at the other end, and a system of metal grids in between. Photoelectrons produced by the images focused on the photocathode, are guided by a uniform magnetic field, parallel to the tube axis. By changing the grid potentials, the drift time of the photoelectrons inside the tube can be varied from 0.35 to 1.5 μs. An image can then be selected by an external trigger with a time resolution in the range of 4–30 ns, depending on the delay time. The selected photoelectrons are finally accelerated onto the phosphor screen, set at 10 kV, where they reproduce the desired image. With a magnetic field of 0.1 T, a spatial resolution of 33 lp/mm was obtained. The high spatial and time resolution make this device an interesting tool for high-energy physics and astrophysics experiments, and for high-speed photography.