Novel flexible network polymers consisting of oligomeric primary polymer chains originated in the mechanistic discussion of multiallyl crosslinking polymerization

Summary It is well known that allyl monomers polymerize only with difficulty and yield polymers having low molecular weights, i.e., oligomers. Inevitably, free-radical multiallyl crosslinking polymerization provides network polymers consisting of oligomeric primary polymer chains, i.e., having abundant dangling chains. This led to the development of novel flexible network polymers such as amphiphilic network polymers (I) consisting of short primary polymer chains and long crosslink units with opposite polarities, simultaneous interpenetrating networks (II) consisting of both polyurethane (PU) and polymethacrylate (PM) networks with oligomeric primary polymer chains, and network polymers (III) consisting of centipede-type primary polymer chains. Thus, the solution copolymerizations of benzyl methacrylate with tricosaethylene glycol dimethacrylate in the presence of lauryl mercaptan yielded I consisting of nonpolar, short primary polymer chains and polar, long crosslink units. The opposite type of I was prepared by the copolymerization of 2-hydroxyethyl methacrylate, a polar monomer having a hydroxyl group, with heneicosapropylene glycol dimethacrylate, a nonpolar monomer having a poly(oxypropylene) unit. The equimolar polyaddition crosslinking reaction of poly(methyl methacrylate-co-2-methacryloyloxyethyl isocyanate) with tri(oxytetramethylene) glycol, leading to PU networks, and the free-radical crosslinking copolymerization of methyl methacrylate with tri(oxytetramethylene) dimethacrylate in the presence of CBr₄, leading to PM networks, were progressed simultaneously, providing II formed via the topological crosslink between PU and PM network structures. The post-copolymerizations of oligomeric allyl methacrylate/alkyl methacrylate precopolymers, having different amounts of pendant allyl groups and different molecular weights, with allyl benzoate/vinyl benzoate monomer mixtures were conducted to give III.     

Infrared study of catalytic reduction of lean NOx with alcohols over alumina-supported silver catalyst

Two intense IR absorption bands due to surface isocyanate (-NCO) species have been observed at 2262 and 2232 cm^–1 when an alumina-supported silver catalyst is exposed to a mixture of NO, O₂ and ethanol at 150°C and subsequently heated to > 300°C in vacuum. The intensity of the isocyanate band is hardly affected by the water existing in the mixture. Methanol is less reactive than ethanol for the formation of isocyanate species. The reaction mechanism of catalytic reduction of lean NOx with alcohols is discussed based on these IR spectroscopic findings.     

Preparation of Porous Cr3C2 Grains with Cr2O3

Porous Cr₃C₂ grains (∼300 to 500 μm) with ∼10 wt% of Cr₂O₃ were prepared by heating a mixture of MgCr₂O₄ grains and graphite powder at 1450° to 1650°C for 2 h in an Al₂O₃ crucible covered by an Al₂O₃ lid with a hole in the center. The porous Cr₃C₂ grains exhibited a three-dimensional network skeleton structure. The mean open pore diameter and the specific surface area of the porous grains formed at 1600°C for 2 h were ∼3.5 (μm and ∼6.7 m²/g, respectively. The present work investigated the morphology and the formation conditions of the porous Cr₃C₂ grains, and this paper will discuss the formation mechanism of those grains in terms of chemical thermodynamics.     

High-speed melt spinning of bicomponent fibers: Mechanism of fiber structure development in poly(ethylene terephthalate)/polypropylene system

High-speed bicomponent spinning of poly(ethylene terephthalate)(PET)(core) and poly-propylene (PP) (sheath) was carried out and the structure development in the individual components, PET and PP, was investigated. The orientation and crystallinity development in the PET component was enhanced as compared to that of the single-component spinning while the PP component remained in a low orientation state and had a pseudohexagonal crystal structure even at high take-up speeds. To clarify the mutual interaction between the two components in bicomponent spinning, a semiquantitative numerical simulation was performed. The simulation results obtained using the Newtonian fluid model showed that the solidification stress in the PET component was enhanced while that of the PP component was decreased in comparison with the corresponding single-component spinning. This is due to the difference in the temperature dependence of their elongational viscosity. Simulation with an upper-convected Maxwell model as the constitutive equation suggested that significant stress relaxation of the PP component can occur in the spinline if the PET component solidifies earlier than does PP. Based on the structural characterization results, and the simulation results, it was concluded that the difference in the activation energy of the elongational viscosity and solidification temperature between the two polymers are the main factors influencing the mutual interaction in the bicomponent spinning process. © 1996 John Wiley & Sons, Inc.     

Change in Oxygen Content of Y2O3-Nd2O3-Doped Silicon Nitride During Firing

The oxygen content of silicon nitride with 1 mol% Y₂O₃—Nd₂O₃ additive was measured after firing to determine the compositional change during gas-pressure sintering. Oxygen content decreases from 2.5 to 0.94 wt% during firing for 4 h at 1900°C and 10-MPa pressure in N₂. This decrease in oxygen results from the release of SiO gas generated by a thermaldecomposition reaction between Si₃N₄ and SiO₂. The resultant sintered silicon nitride material contains less than 1 wt% oxygen.     

Novel anion exchange membranes having fluorocarbon backbone: Preparation and stability

Anion exchange membranes with excellent durability were prepared by chemical modification of Nafion. The modification was achieved by transformation of the sulfonic acid group into quaternary ammonium group. Namely, Nafion membrane was first converted into an amide-type membrane. Reduction of the carbonxyl group to methylene followed by quaternarization with alkyl iodide resulted in the formation of an anion exchange membrane. The electric resistance of the resulting membranes depends on the equivalent weight of the starting membranes (4.4–6.0 Ω cm² in 0.5N NaCl). The characteristics of the membranes are the excellent stability toward chemical substances such as organic solvents, oxidizing agents, acids, etc. For example, the membranes are stable in aqueous saturated chlorine solution at 60°C for 1000 hr.     

The Function of Sialidase Revealed by Sialidase Activity Imaging Probe

Sialidase cleaves sialic acid residues from glycans such as glycoproteins and glycolipids. In the brain, desorption of the sialic acid by sialidase is essential for synaptic plasticity, learning and memory and synaptic transmission. BTP3-Neu5Ac has been developed for sensitive imaging of sialidase enzyme activity in mammalian tissues. Sialidase activity in the rat hippocampus detected with BTP3-Neu5Ac increases rapidly by neuronal depolarization. It is presumed that an increased sialidase activity in conjunction with neural excitation is involved in the formation of the neural circuit for memory. Since sialidase inhibits the exocytosis of the excitatory neurotransmitter glutamate, the increased sialidase activity by neural excitation might play a role in the negative feedback mechanism against the glutamate release. Mammalian tissues other than the brain have also been stained with BTP3-Neu5Ac. On the basis of information on the sialidase activity imaging in the pancreas, it was found that sialidase inhibitor can be used as an anti-diabetic drug that can avoid hypoglycemia, a serious side effect of insulin secretagogues. In this review, we discuss the role of sialidase in the brain as well as in the pancreas and skin, as revealed by using a sialidase activity imaging probe. We also present the detection of influenza virus with BTP3-Neu5Ac and modification of BTP3-Neu5Ac.     

Bioaccumulation, temporal trend, and geographical distribution of synthetic musks in the marine environment

Bioaccumulation of synthetic musks in a marine food chain was investigated by analyzing marine organisms at various trophic levels, including lugworm, clam, crustacean, fish, marine mammal, and bird samples collected from tidal flat and shallow water areas of the Ariake Sea, Japan. Two of the polycyclic musks, HHCB and AHTN, were the dominant compounds found in most of the samples analyzed, whereas nitro musks were not detected in any of the organisms, suggesting greater usage of polycyclic musks relative to the nitro musks in Japan. The highest concentrations of HHCB were detected in clams (258-2730 ng/g lipid wt.), whereas HHCB concentrations in mallard and black-headed gull were low, and comparable with concentrations in fish and crab. These results are in contrast to the bioaccumulation pattern of polychlorinated biphenyls; for which a positive correlation between the concentration and the trophic status of organisms was found. Such a difference in the bioaccumulation is probably due to the metabolism and elimination of HHCB in higher trophic organisms. Temporal trends in concentrations of synthetic musks were examined by analyzing tissues of marine mammals from Japanese coastal waters collected during 1977-2005. HHCB concentrations in marine mammals have shown significant increase since the early 1990s, suggesting a continuous input of this compound into the marine environment. Comparison of the time trend for HHCB with those for PCBs and PBDEs suggested that the rates of increase in HHCB concentrations were higher than the other classes of pollutants. To examine the geographical distribution of HHCB, we have analyzed tissues of fish, marine mammals, and birds collected from several locations. Synthetic musks were not detected in a sperm whale (pelagic species) from Japanese coastal water and in eggs of south polar skua from Antarctica. While the number of samples analyzed is limited, these results imply a lack of long-range transportation potential of synthetic musks in the environment.     

PACAP-mediated sperm-cumulus cell interaction promotes fertilization

The developing acrosome in spermatids contains pituitary adenylate cyclase-activating polypeptide (PACAP). However, the role of the acrosomal PACAP remains unclear because it has not been detected in mature spermatids and sperm. We reinvestigated whether the sperm acrosome contains PACAP. An antiserum produced against PACAP reacted to the anterior acrosome in epididymal sperm fixed under mild conditions, suggesting that PACAP acts on oocytes and/or cumulus cells at the site of fertilization. Immunolabeling and RT-PCR demonstrated the presence of PACAP type I receptor, a PACAP-specific receptor, in postovulatory cumulus cells. To investigate the role of PACAP in fertilization, we pretreated cumulus-oocyte complexes with the polypeptide. At a low concentration of sperm, the fertilization rate was significantly enhanced by PACAP in a dose-dependent manner. Sperm penetration through the oocyte investment, cumulus layer, and zona pellucida was also enhanced by PACAP. The enhancement was probably due to an enhancement in sperm motility and the zona-induced acrosome reaction, which were stimulated by a cumulus cell-releasing factor. Indeed, PACAP treatment increased the secretion of progesterone from the cumulus-oocyte complexes. These results strongly suggest that in response to PACAP, cumulus cells release a soluble factor that probably stimulates sperm motility and the acrosome reaction, thereby promoting fertilization.     

Chemical analysis and acetylcholinesterase inhibitory effect of anthocyanin-rich red leaf tea (cv. Sunrouge)

BACKGROUND: The purpose of this study was to evaluate the effects of leaf order or crop season on anthocyanins and other chemicals in the anthocyanin‐rich tea cultivar ‘Sunrouge’ (Camellia sinensis x C. taliensis) by using high‐performance liquid chromatography, and to study the effect of ‘Sunrouge’ extract on acetylcholinesterase (AChE) activity in human neuroblastoma SK‐N‐SH cells. RESULTS: The total anthocyanin content was higher in the third (3.09 mg g^?1) than in the second (2.24 mg g^?1) or first crop season (1.79 mg g^?1). The amount of anthocyanins contained in the stem was high (1.61 mg g^?1). In the third crop season, the concentrations of delphinidin‐3‐O‐β‐D ‐(6‐(E)‐p‐coumaroyl)galactopyranoside (DCGa), cyanidin‐3‐O‐β‐D ‐(6‐(E)‐p‐coumaroyl)galactopyranoside, delphinidin‐3‐O‐β‐D ‐galactopyranoside, delphinidin‐3‐O‐β‐D ‐(6‐O‐(Z)‐p‐coumaroyl)galactopyranoside, cyanidin‐3‐O‐β‐D ‐galactoside, and delphinidin‐3‐O‐β‐D ‐glucoside were 1.57 mg g^?1, 0.52 mg g^?1, 0.40 mg g^?1, 0.22 mg g^?1, 0.14 mg g^?1, and 0.11 mg g^?1, respectively. DCGa accounted for about 50% of the anthocyanins present. The suppressive effect of ‘Sunrouge’ water extract on AChE activity in human neuroblastoma SK‐N‐SH cells was the strongest among the three tea cultivars (‘Sunrouge’, ‘Yabukita’ and ‘Benifuuki’). CONCLUSION: These results suggested that ‘Sunrouge’ might protect humans from humans from AChE‐related diseases by suppressing AChE activity. To obtain sufficient amounts of anthocyanins, catechins and/or caffeine for a functional food material, ‘Sunrouge’ from the third crop season should be used. Copyright © 2012 Society of Chemical Industry