Characterization of the Main Semiconductor Laser Static and Dynamic Working Parameters From CW Optical Spectrum Measurements

We present a complete characterization of the work parameters of several types of semiconductor lasers. Static parameters as: power, linewidth and linewidth enhancement factor and also dynamic parameters such as: relaxation oscillations, relative intensity noise and damping rates are calculated using measurements of the optical spectrum of the lasers operated in continuous-wave mode. Methods for the calculation of these parameters are described and applied to the lasers under test by means of a single general setup and a single set of measurements     

Tuning the pKa of the antihistaminic drug chlorpheniramine maleate by supramolecular interactions with water-soluble polymers

The interaction of the pharmacologically important chlorpheniramine maleate (CPM) with polyanions containing sulfonate groups such as poly(sodium 4-styrenesulfonate) (PSS), poly(sodium vinylsulfonate) (PVS), and the more hydrophobic poly(sodium 2-(N-acrylamido)-2-methyl-propanesulfonate) (PAMPS) has been studied by ¹H NMR. It was found that the pK_a of the low-molecular weight molecule (LMWM) may be modified by its interaction with the polyanions, changing from 3 to 5, due to electric charge compensation. Interestingly, the interaction of CPM with PSS produces changes in CPM resonances, such as a general broadening and upfield shifts of the signals, and NOE effects between the LMWM and the water-soluble polymer (WSP) that indicate the presence of π-π interactions.     

Rational approximation via selective modal analysis

We describe a recently developed framework for exploring the structure of linear time-invariant models of large systems, and for constructing interpretable or physically-based, reduced-order models that reproduce selected modes of the original systems to a desired accuracy. Application of this framework to constructing lumped approximations for interconnections of lumped and distributed systems is briefly explored.Support for this work has come partially from the Electric Power Research Institute, Palo Alto, California, under Contract RP 1764-8 monitored by Dr. Neal Balu, and for the second author from the I.T.P. Foundation, Madrid, Spain.     

A structural optimization approach in process synthesis—II : Heat recovery networks

Several formulations of the transshipment model from Operations Research are proposed for the optimal synthesis of heat exchanger networks. The linear programming versions are used for predicting the minimum utility cost, and can handle restricted matches and multiple utilities. The mixed-integer programming version yields minimum utility cost networks in which the number of units is minimized, while allowing stream splitting and selection of most preferred matches. It is shown that the transshipment models can also be incorporated easily within a mixed-integer programming approach for synthesizing chemical processing systems. Several numerical examples are presented which show that the proposed models are computationally very efficient.     

A structural optimization approach in process synthesis—III : Total processing systems

A strategy based on mixed-integer programming is proposed for the optimal synthesis of total processing systems that consist of a chemical plant, with its heat recovery network and utility system. A mixed-integer programming model for the chemical plant is presented which is shown to be compatible with the models developed in previous papers for the utility system and heat recovery network. The strategy accounts explicitly for the interactions among the three components, and its application is illustrated with a large example problem.     

Influence of the acidity level on the electropolymerization of N-vinylcarbazole: Electrochemical study and characterization of poly(3,6-N-vinylcarbazole)

Poly(3,6-N-vinylcarbazole) films were prepared by electrochemical oxidation of N-vinylcarbazole on a Pt electrode using acetonitrile as solvent and tetraethylammonium tetrafluoroborate as electrolyte. The electrosynthesis was carried out by electrical potential cycling in the presence of two different bases: tetraethylammonium benzoate (Bz⁻) and tetraethylammonium phthalate (Ph⁻). These salts were expected to modify the acidity level of the electrolyte since they can act as scavengers for the protons released during the polymerization, when the reaction takes place in the carbazole unit.Products were characterized by cyclic voltammetry, scanning electron microscopy, FTIR spectroscopy, thermogravimetric analysis, differential scanning calorimetry, absorption spectroscopy and four-probe electrical conductivity measurements. Both bases influenced significantly the chemical structure and morphology of the deposited materials. The presence of Ph⁻ in the electrolyte decreases the cross-linking of the electrodeposited polymer, leading to a poly(3,6-N-vinylcarbazole) bearing a more uniform morphology, higher thermal stability and electrical conductivity compared to those of the polymers obtained in the presence of Bz⁻ and without acidity control.     

Southern spanish windmills: Technological aspects

This paper shows the study carried out in a doctoral thesis about windmills in south-east Spain, in the area of Campo de Níjar in the province of Almeria. It intends to pay homage to Spanish windmills as a way of commemorating the fourth centenary of the masterwork of Spanish Literature, ‘Don Quixote’ in which the silhouette of the windmill is a pervading symbol.Wheat milling has been an important factor in the socio-economic development of rural Spain for centuries. The type of mill used depended on the energy resources available, wind or water. In the Campo de Níjar (Almeria, Andalusia, Spain), wind is the principal energy source, and therefore, windmills were widely used, as in other areas of Spain. In this paper, we study the technological conditions of these old windmills, we carry out a wind evaluation of the area, and we calculate the power and momentum of these windmills with a discussion of the results found.     

Directional light scanning laser ophthalmoscope

The cone photoreceptor mosaic of the living human eye has in a limited number of cases been imaged without the use of wavefront-correction techniques. To accomplish this, the directionality of the photoreceptors, as manifested by their waveguiding properties, may be used to advantage. In the present paper we provide a model of our recently proposed directional light scanning laser ophthalmoscope [Opt. Lett. 29, 968 (2004)] together with a detailed numerical analysis of the device. The outcome is compared with experimental results.     

Supertoughness in Polysulfone/Poly(ethylene‐octene) Blends

Summary: Poly(sulfone of Bisphenol A) (PSU) based blends were obtained by melt blending PSU with up to 15 wt.‐% poly(ethylene‐octene) either modified with maleic anhydride (mPEO) or not (PEO). The dispersed particle size was small and similar in blends with PEO or mPEO. These facts indicated respectively that the interfacial tension was low and the lack of compatibilizing effect of mPEO. Some preferential presence of PEO in the outer surface of the specimens was observed, and was attributed to the large viscosity difference between the two components of the blends. This had no effect on the modulus of elasticity, but speeded up both the yield stress and ductility decreases at rubber contents above 3.25 wt.‐%. However, despite the immiscibility of the components, and thanks to the small particle size of the blends, super‐toughness was attained in the unmodified PSU/PEO blends. This was at PEO contents (3.25 wt.‐%) at which the modulus, yield stress and ductility of the blends were almost as good as those of pure PSU. It appeared that a change of the chemical nature of the rubber did not influence by itself super‐toughness, unless it was accompanied by either a morphological or adhesion change.

Impact strength of PSU‐based blends vs. PEO (○) or mPEO (?) content.