Optimization of supercritical CO2 extraction of dried Helichrysum italicum flowers by response surface methodology: GC-MS profiles of the extracts and essential oil

Supercritical (SC) CO₂ extraction of dried Immortelle flowers was performed at different process parameters. The optimal extraction conditions related to the yield were determined by response surface methodology (yield 4.09% at 20 MPa and 52°C). The extracts were analyzed by GC-MS and tremetone derivatives dominated: bitalin A, 12-acetoxytremetone, gnaphaliol, 1-[2-(2-methyl-2,3-dihydroxypropyl)-2,3-dihydro-1-benzofuran-5-yl]ethanone, isobutyl bitalin A, and 1-[2-(acetylprop-1-en-2-yl)-3-hydroxy-2,3-dihydro-1-benzofuran-5-yl]ethanone. Striking differences were found among the essential oil and SC-CO₂ extracts composition. The major oil compounds were γ-curcumene, α-pinene, β-selinene, α-selinene, and limonene. Mono- and sesquiterpene were found among minor constituents of the extracts. Neryl acetate was present in the extracts and essential oil.     

Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites

Triaxial residual tensile stresses resulting after cooling a 3D woven composite from the curing temperature cause cracking in the resin pockets for weave architectures that have high through‐the‐thickness constraint. We show how curing cycle modifications can reduce the hydrostatic tensile stress generated by thermal mismatch during cooling of Hexcel RTM6 epoxy resin constrained in a quartz tube which simulates extreme constraint in a composite. The modified curing schedule consists of a high temperature cure to just before the glass transition, a lower temperature hold that takes the resin through the glass transition thereby freezing in the zero stress state, followed by high temperature cure to bring the resin to full conversion. We show that this process is sensitive to heating rates and can reduce the zero stress state of non‐toughened RTM6 resin to a temperature similar to a commercial rubber‐toughened resin, Cycom PR520. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43373.     

Antioxidant Activity of γ-Oryzanol: A Complex Network of Interactions

γ-oryzanol (Orz), a steryl ferulate extracted from rice bran layer, exerts a wide spectrum of biological activities. In addition to its antioxidant activity, Orz is often associated with cholesterol-lowering, anti-inflammatory, anti-cancer and anti-diabetic effects. In recent years, the usefulness of Orz has been studied for the treatment of metabolic diseases, as it acts to ameliorate insulin activity, cholesterol metabolism, and associated chronic inflammation. Previous studies have shown the direct action of Orz when downregulating the expression of genes that encode proteins related to adiposity (CCAAT/enhancer binding proteins (C/EBPs)), inflammatory responses (nuclear factor kappa-B (NF-κB)), and metabolic syndrome (peroxisome proliferator-activated receptors (PPARs)). It is likely that this wide range of beneficial activities results from a complex network of interactions and signals triggered, and/or inhibited by its antioxidant properties. This review focuses on the significance of Orz in metabolic disorders, which feature remarkable oxidative imbalance, such as impaired glucose metabolism, obesity, and inflammation.     

Interpolyelectrolyte complexes of maleic acid copolymers and chitosan for stabilization and functionalization of magnetite nano‐ and microparticles

A facile method of preparation of stabilized and functionalized nano‐ and microparticles of magnetite by successive application of oppositely charged polymers with a regular structure of macromolecular chains (chitosan and maleic acid copolymers) onto Fe₃O₄ core are developed. This approach makes it possible to create two types of magnetite interpolyelectrolyte shells, containing carboxylic or amino groups in outer layer of shell. Composition and magnetic properties of composite particles depend on nature of the copolymer of maleic acid, reaction conditions and size of obtained particles. The carboxylic groups of copolymer in outer layer of interpolyelectrolyte shell were converted into reactive anhydride groups by heating. Thermal treatment also leads to covalent crosslinking of shell and improves stability of composites both in acidic and alkaline media. Horseradish peroxidase was successfully immobilized onto covalently crosslinked and activated microparticles of Fe₃O₄ in aqueous medium without of condensing agents. The proposed reproducible and low‐cost technique does not use toxic reagents or solvents at all stages, including preparation of Fe₃O₄, formation, activation and crosslinking, of magnetite shell, modification of activated surface of composite particles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39663.     

Rectangular Slit Atmospheric Pressure Aerodynamic Lens Aerosol Concentrator

A rectangular slit micro-aerodynamic-lens (μADL) aerosol concentrator operating at atmospheric pressure has been developed. A single stage version has shown concentration ratios of up to 40:1 for 1 μm aerosol particles while particles larger than 2 μm can be concentrated by more than 100:1 in a single stage. The design of this device has been guided by unsteady 3D CFD modeling using detached eddy simulations (DES), and has been validated experimentally using polystyrene spheres and salt crystals of known aerodynamic diameters. The pressure drop in the device does not exceed 1.5 kPa in the major flow and 0.3 kPa in the minor flow at a total flow of 10 slpm.

Copyright 2014 American Association for Aerosol Research     

Possibilities of the Computer-Controlled Detonation Spraying method: A chemistry viewpoint

This article is aimed to discuss the chemical aspects of detonation spraying of powder materials. In this method of coating deposition, ceramic, metallic or composite powders are injected into the barrel of a detonation gun filled with an explosive gaseous mixture. When the latter is ignited, the powders are heated and accelerated toward the substrate. Subjected to high temperatures, the powders are prone to chemical reactions, the reaction products possibly becoming the major phase constituents of the coatings. What types of reactions are possible? Can these reactions be carried out in a controlled manner? We answer these questions considering the interactions of the sprayed powders with the gaseous environment of the barrel as well as those between the phases of a composite feedstock powder. In Computer-Controlled Detonation Spraying (CCDS), the explosive charge and stoichiometry of the fuel-oxygen mixtures are precisely measured and can be flexibly changed. Our studies demonstrate that with the introduction of a highly flexible process of CCDS, detonation spraying has entered a new development stage, at which it can be considered as a powerful method of composition and microstructure tailoring of thermally sprayed coatings. During CCDS of TiO₂-containing powders, chemical reduction of titanium dioxide can be carried out to different levels to form either oxygen-deficient TiO_2−x or Ti₃O₅ suboxide. CCDS of Ti₃Al can produce titanium oxide coatings when oxidation by the detonation products dominates or titanium nitride-titanium aluminide coatings when oxidation is hindered but the interaction of the powders with nitrogen—a carrier gas component—is favored. During detonation spraying of Ti₃SiC₂–Cu composites, the Ti₃SiC₂ phase is preserved only in cold conditions; otherwise, Si de-intercalates from the Ti₃SiC₂ phase and dissolves in Cu resulting in the formation of the TiC_x–Cu(Si) composite coatings.     

Upregulation of Cathepsin X in Glioblastoma: Interplay with γ-Enolase and the Effects of Selective Cathepsin X Inhibitors

Glioblastoma (GBM) is the most common and deadly primary brain tumor in adults. Understanding GBM pathobiology and discovering novel therapeutic targets are critical to finding efficient treatments. Upregulation of the lysosomal cysteine carboxypeptidase cathepsin X has been linked to immune dysfunction and neurodegenerative diseases, but its role in cancer and particularly in GBM progression in patients is unknown. In this study, cathepsin X expression and activity were found to be upregulated in human GBM tissues compared to low-grade gliomas and nontumor brain tissues. Cathepsin X was localized in GBM cells as well as in tumor-associated macrophages and microglia. Subsequently, potent irreversible (AMS36) and reversible (Z7) selective cathepsin X inhibitors were tested in vitro. Selective cathepsin X inhibitors decreased the viability of patient-derived GBM cells as well as macrophages and microglia that were cultured in conditioned media of GBM cells. We next examined the expression pattern of neuron-specific enzyme γ-enolase, which is the target of cathepsin X. We found that there was a correlation between high proteolytic activity of cathepsin X and C-terminal cleavage of γ-enolase and that cathepsin X and γ-enolase were colocalized in GBM tissues, preferentially in GBM-associated macrophages and microglia. Taken together, our results on patient-derived material suggest that cathepsin X is involved in GBM progression and is a potential target for therapeutic approaches against GBM.     

Babassu Biodiesel Doped with Antioxidants: Assessment of Thermo-Oxidative Stability by Borchardt and Daniels Method

In this study, three antioxidants namely N,N′-di-sec-butyl-p-phenylenediamine (PDA), 2,4,6-Tri-tert-butylphenol/2,6-Di-tert-butylphenol (IONOL), and unsaturated cardanol (U-CDN) were added to babassu biodiesel (BB) at a concentration of 100 mg kg⁻¹ to improve its oxidative stability. Differential Scanning Calorimetry (DSC) was used to evaluate the oxidative stability of the samples using synthetic air atmosphere and two temperatures (25 and 110 °C) instead of the conventional Rancimat method. The kinetic parameters were calculated according to Borchardt and Daniels method (ASTM E2041). All doped samples showed higher thermo-oxidative stability when compared to pure babassu biodiesel with increasing activation energies of 66.5% for PDA, 19.4% for IONOL, and 3.9% for U-CDN. At 25 °C, the babassu biodiesel showed a high oxidation reaction rate of 1.76 × 10⁻¹⁵ min⁻¹. For the doped samples at the same temperature, that rate was reduced by a factor of 2, 200, and 3 × 10⁸ times for U-CDN, IONOL, and PDA, respectively. At 110 °C, the BB and the BB + U-CDN samples showed high reaction rates, whereas the formulations with IONOL and PDA had rates reduced by 10 and 7.4 × 10³ times, respectively. The thermal data showed R² values higher than 0.99. All results confirmed the action of the antioxidants in retarding oxidation reactions in biodiesel. DSC is a promising alternative method for the determination of oxidative stability of biodiesel and its formulations with antioxidants.     

“Arbequina” Olive Oil Composition Is Affected by the Application of Regulated Deficit Irrigation during Pit Hardening Stage

Three new regulated deficit irrigation (RDI) treatments were applied to “Arbequina” olive orchards during pit hardening. Oil quality was determined by measuring analytical parameters for olive oil grading, antioxidant activity, total phenol content, fatty acid profile, volatile compounds profile, and sensory analysis. Oils from RDI were classified as “extra virgin olive oil” and their quality was improved due to their higher antioxidant potential (ABTS⁺ [increased ~75%] and DPPH^˙ [increased ~25%] assays) and phenols (increased ~53%) than control. Concentration of total volatile compounds decreased (~27%) but RDI olive oils showed a more balanced profile (alcohols, aldehydes, and esters). Monounsaturated fatty acid content increased (~5%) and atherogenic and thrombogenic indexes decreased (~8.5%) in RDI olive oil. Regarding sensory analysis, RDI provided more balanced oils with higher fruit aroma than control. Other benefits of RDI olive oil, when compared with oil from full irrigated orchards are reduced use of water and improved functional and sensory quality.