Early Lipid Raft-Related Changes: Interplay between Unilateral Denervation and Hindlimb Suspension

Muscle disuse and denervation leads to muscle atrophy, but underlying mechanisms can be different. Previously, we have found ceramide (Cer) accumulation and lipid raft disruption after acute hindlimb suspension (HS), a model of muscle disuse. Herein, using biochemical and fluorescent approaches the influence of unilateral denervation itself and in combination with short-term HS on membrane-related parameters of rat soleus muscle was studied. Denervation increased immunoexpression of sphingomyelinase and Cer in plasmalemmal regions, but decreased Cer content in the raft fraction and enhanced lipid raft integrity. Preliminary denervation suppressed (1) HS-induced Cer accumulation in plasmalemmal regions, shown for both nonraft and raft-fractions; (2) HS-mediated decrease in lipid raft integrity. Similar to denervation, inhibition of the sciatic nerve afferents with capsaicin itself increased Cer plasmalemmal immunoexpression, but attenuated the membrane-related effects of HS. Finally, both denervation and capsaicin treatment increased immunoexpression of proapoptotic protein Bax and inhibited HS-driven increase in antiapoptotic protein Bcl-2. Thus, denervation can increase lipid raft formation and attenuate HS-induced alterations probably due to decrease of Cer levels in the raft fraction. The effects of denervation could be at least partially caused by the loss of afferentation. The study points to the importance of motor and afferent inputs in control of Cer distribution and thereby stability of lipid rafts in the junctional and extrajunctional membranes of the muscle.     

Telomere Length in Metaphase Chromosomes of Human Triploid Zygotes

The human lifespan is strongly influenced by telomere length (TL) which is defined in a zygote—when two highly specialised haploid cells form a new diploid organism. Although TL is a variable parameter, it fluctuates in a limited range. We aimed to establish the determining factors of TL in chromosomes of maternal and paternal origin in human triploid zygotes. Using Q-FISH, we examined TL in the metaphase chromosomes of 28 human triploid zygotes obtained from 22 couples. The chromosomes’ parental origin was identified immunocytochemically through weak DNA methylation and strong hydroxymethylation in the sperm-derived (paternal) chromosomes versus strong DNA methylation and weak hydroxymethylation in the oocyte-derived (maternal) ones. In 24 zygotes, one maternal and two paternal chromosome sets were identified, while the four remaining zygotes contained one paternal and two maternal sets. For each zygote, we compared mean relative TLs between parental chromosomes, identifying a significant difference in favour of the paternal chromosomes, which attests to a certain “imprinting” of these regions. Mean relative TLs in paternal or maternal chromosomes did not correlate with the respective parent’s age. Similarly, no correlation was observed between the mean relative TL and sperm quality parameters: concentration, progressive motility and normal morphology. Based on the comparison of TLs in chromosomes inherited from a single individual’s gametes with those in chromosomes inherited from different individuals’ gametes, we compared intraindividual (intercellular) and interindividual variability, obtaining significance in favour of the latter and thus validating the role of heredity in determining TL in zygotes. A comparison of the interchromatid TL differences across the chromosomes from sets of different parental origin with those from PHA-stimulated lymphocytes showed an absence of a significant difference between the maternal and paternal sets but a significant excess over the lymphocytes. Therefore, interchromatid TL differences are more pronounced in zygotes than in lymphocytes. To summarise, TL in human zygotes is determined both by heredity and parental origin; the input of other factors is possible within the individual’s reaction norm.     

The “Angiogenic Switch” and Functional Resources in Cyclic Sports Athletes

Regular physical activity in cyclic sports can influence the so-called “angiogenic switch”, which is considered as an imbalance between proangiogenic and anti-angiogenic molecules. Disruption of the synthesis of angiogenic molecules can be caused by local changes in tissues under the influence of excessive physical exertion and its consequences, such as chronic oxidative stress and associated hypoxia, metabolic acidosis, sports injuries, etc. A review of publications on signaling pathways that activate and inhibit angiogenesis in skeletal muscles, myocardium, lung, and nervous tissue under the influence of intense physical activity in cyclic sports. Materials: We searched PubMed, SCOPUS, Web of Science, Google Scholar, Clinical keys, and e-LIBRARY databases for full-text articles published from 2000 to 2020, using keywords and their combinations. Results: An important aspect of adaptation to training loads in cyclic sports is an increase in the number of capillaries in muscle fibers, which improves the metabolism of skeletal muscles and myocardium, as well as nervous and lung tissue. Recent studies have shown that myocardial endothelial cells not only respond to hemodynamic forces and paracrine signals from neighboring cells, but also take an active part in heart remodeling processes, stimulating the growth and contractility of cardiomyocytes or the production of extracellular matrix proteins in myofibroblasts. As myocardial vascularization plays a central role in the transition from adaptive heart hypertrophy to heart failure, further study of the signaling mechanisms involved in the regulation of angiogenesis in the myocardium is important in sports practice. The study of the “angiogenic switch” problem in the cerebrovascular and cardiovascular systems allows us to claim that the formation of new vessels is mediated by a complex interaction of all growth factors. Although the lungs are one of the limiting systems of the body in cyclic sports, their response to high-intensity loads and other environmental stresses is often overlooked. Airway epithelial cells are the predominant source of several growth factors throughout lung organogenesis and appear to be critical for normal alveolarization, rapid alveolar proliferation, and normal vascular development. There are many controversial questions about the role of growth factors in the physiology and pathology of the lungs. The presented review has demonstrated that when doing sports, it is necessary to give a careful consideration to the possible positive and negative effects of growth factors on muscles, myocardium, lung tissue, and brain. Primarily, the “angiogenic switch” is important in aerobic sports (long distance running). Conclusions: Angiogenesis is a physiological process of the formation of new blood capillaries, which play an important role in the functioning of skeletal muscles, myocardium, lung, and nervous tissue in athletes. Violation of the “angiogenic switch” as a balance between proangiogenic and anti-angiogenic molecules can lead to a decrease in the functional resources of the nervous, musculoskeletal, cardiovascular, and respiratory systems in athletes and, as a consequence, to a decrease in sports performance.     

Sol-Gel Alumina Coating for Improved Cyclic Oxidation Resistance of Silicon Nitride

A 25 nm thick α-alumina layer was deposited on a turbine-grade silicon nitride by sol-gel dip coating and subsequent heat treatment in air at 1200°C. This layer had a nanometer grain structure. Silicon nitride protected by this thin layer showed a significant improvement in oxidation resistance over its uncoated counterpart after 200 cyclic exposures in air at 1250°C. The oxide layer grown on the coated silicon nitride also exhibited superior surface morphology, compared with the uncoated silicon nitride.     

The genesis of polyaniline nanotubes

Aniline has been oxidized with ammonium peroxydisulfate in 0.4 M acetic acid. Protons are produced in the course of oxidation and the pH decreases as the reaction proceeds. The oxidation had two subsequent phases: (1) the oxidation of the neutral aniline molecules and the initially produced low-molecular weight aniline oligomers at low acidity, followed by (2) the oxidation of the anilinium cation after the acidity became higher. The two phases of oxidation gave different products, aniline oligomers with mixed ortho- and para-coupling of aniline molecules, and polyaniline nanotubes, respectively.The aniline oligomers are produced at first at low acidity, pH > 4, some of them as rod-like crystals. The molecular weight of the oligomers has been assessed by gel-permeation chromatography to be of several thousands. The 2-3 wt.% content of sulfur in deprotonated samples suggests that the oxidation products are partly sulfonated. The oxidation of ortho-coupled anilines combined with intramolecular cyclization produces phenazine units or their blocks, as indicated by FTIR spectra. A high-molecular weight polyaniline is produced at pH < 2. The protonation of the intermediate pernigraniline form of polyaniline is a prerequisite for the polymerization.The nano-sized oligomer crystallites serve as starting templates for the nucleation of PANI nanotubes. Further growth of nanotubes proceeds by the self-organization of the phenazine units or their blocks located at the ends of the PANI chains. Polyaniline nanotubes have a typical outer diameter of 100-200 nm, with a wall thickness of 50-100 nm, an inner diameter of 0-100 nm, and a length extending to several micrometres.     

Interactions between immunoglobulin-like and catalytic modules in Clostridium thermocellum cellulosomal cellobiohydrolase CbhA

Cellobiohydrolase CbhA from Clostridium thermocellum cellulosome is a multi-modular protein composed starting from the N-terminus of a carbohydrate-binding module (CBM) of family 4, an immunoglobulin(Ig)-like module, a catalytic module of family 9 glycoside hydrolases (GH9), X1(1) and X1(2) modules, a CBM of family 3 and a dockerin module. Deletion of the Ig-like module from the Ig-GH9 construct results in complete inactivation of the GH9 module. The crystal structure of the Ig-GH9 module pair reveals the existence of an extensive module interface composed of over 40 amino acid residues of both modules and maintained through a large number of hydrophilic and hydrophobic interactions. To investigate the importance of these interactions between the two modules, we compared the secondary and tertiary structures and thermostabilities of the individual Ig-like and GH9 modules and the Ig-GH9 module pair using both circular dichroism (CD) spectroscopy and differential scanning calorimetry (DSC). Thr230, Asp262 and Asp264 of the Ig-like module are located in the module interface of the Ig-GH9 module pair and are suggested to be important in 'communication' between the modules. These residues were mutated to alanyl residues. The structure, stability and catalytic properties of the native Ig-GH9 and its D264A and T230A/D262A mutants were compared. The results indicate that despite being able to fold relatively independently, the Ig-like and GH9 modules interact and these interactions affect the final fold and stability of each module. Mutations of one or two amino acid residues lead to destabilization and change of the mechanism of thermal unfolding of the polypeptides. The enzymatic properties of native Ig-GH9, D264A and T230A/D262A mutants are similar. The results indicate that inactivation of the GH9 module occurs as a result of multiple structural disturbances finally affecting the topology of the catalytic center.     

Scandinavian Thins on Top of Cake: New and Improved Algorithms for Stacking and Packing

We show how to compute the smallest rectangle that can enclose any polygon, from a given set of polygons, in nearly linear time; we also present a PTAS for the problem, as well as a linear-time algorithm for the case when the polygons are rectangles themselves. We prove that finding a smallest convex polygon that encloses any of the given polygons is NP-hard, and give a PTAS for minimizing the perimeter of the convex enclosure. We also give efficient algorithms to find the smallest rectangle simultaneously enclosing a given pair of convex polygons.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.     

A High-Precision Time Handling Library

An appropriate assessment of end-to-end network performance presumes highly efficient time tracking and measurement with precise time control of the stopping and resuming of program operation. In this paper, a novel approach to solving the problems of highly efficient and precise time measurements on PC-platforms and on ARM-architectures is proposed. A new unified High Performance Timer and a corresponding software library offer a unified interface to the known time counters and automatically identify the fastest and most reliable time source, available in the user space of a computing system. The research is focused on developing an approach of unified time acquisition from the PC hardware and accordingly substituting the common way of getting the time value through Linux system calls. The presented approach provides a much faster means of obtaining the time values with a nanosecond precision than by using conventional means. Moreover, it is capable of handling the sequential time value, precise sleep functions and process resuming. This ability means the reduction of wasting computer resources during the execution of a sleeping process from 100% （busy-wait） to 1-1.5%, whereas the benefits of very accurate process resuming times on long waits are maintained.