Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Production of NiO,NiO/Ag,NiO/Au,and NiO/Pt hollow spheres by using block copolymer stabilized microspheres as a template

Hollow spheres of nickel oxide (NiO) and silver, gold, and platinum nanoparticle loaded NiO composites were successfully produced by using polystyrene (PS) latexes as hard template. Due to the presence of tertiary amine based diblock copolymer stabilizer on the surface of PS, the tertiary amine functional groups provided homogene deposition of nickel hydroxide, and then the precursor NiO salt production on the surface of PS latexes with a controlled precipitation technique. Then, NiO and NiO/metal NP hollow spheres were produced by calcination at 600 °C. Thermogravimetric analysis indicated that the amounts of NiO and NiO-composite after calcination were in the range of 21.1–29.7 wt%. The diameters of metal oxide spheres were in the range of 2.0–2.7 μm and the shell thickness were in the range of 250–350 nm. These structures had very low densities due to their porous and hollow structures and had outer layers with highly rough surfaces due to formation of nanosheets, which may offer important advantages for catalysis studies.     

Properties of Induction Plasma Sprayed Iron Based Nanostructured Alloy Coatings for Metal Based Thermal Barrier Coatings

Metal-based thermal barrier coatings (MBTBCs) have been produced using high frequency induction plasma spraying (IPS) of iron-based nanostructured alloy powders. The study of MBTBCs has been initiated to challenge issues associated with current TBC materials such as difficult prediction of their “in-service” lifetime. Reliability of TBCs is an important aspect besides the economical consideration. Therefore, the study of MBTBCs, which should posses higher toughness than the current TBC materials, has been initiated to challenge the mechanical problems of ceramic-based TBCs (CBTBCs) to create a new generation of TBCs. The thermal diffusivity (TD) (α) properties of the MBTBCs were measured using a laser flash method, and density (ρ) and specific heat (C _p) of the MBTBCs were also measured for their thermal conductivity (k) calculation (k = αρ C _p).     

Micro-end-milling of single-crystal silicon

Ductile-regime machining of silicon using micro-end-mill is almost impossible because of the brittle properties of silicon, crystal orientation effects, edge radius of the cutter and the hardness of tool materials. Micro-end-milling can potentially be used to create desired three dimensional (3D) free form surface features using the ductile machining technology for single-crystal silicon. There is still a lack of fundamental understanding of micro-end-milling of single-crystal silicon using diamond-coated tool, specifically basic understanding of material removal mechanism, cutting forces and machined surface integrity in micro-scale machining of silicon. In this paper, further research to understand the chip formation mechanism was conducted. An analysis was performed to discover how the chips are removed during the milling process. Brittle and ductile cutting regimes corresponding to machined surfaces and chips are discussed. Experiments have shown that single-crystal silicon can be ductile machined using micro-end-milling process. Forces generated when micro-end-milling single-crystal silicon are used to determine the performance of the milling process. Experimental results show that the dependence of the cutting force on the uncut chip thickness can be well described by a polynomial function order n. As cutting regime becomes more brittle, the cutting force has more complex function.     

Effect of TiO2 on high-temperature thermoelectric properties of ZnO

The as-sintered Zn_1−xTi_xO (0.01 ≤ x ≤ 0.05) samples contained a solid solution of Zn_1−xTi_xO with a wurtzite structure and a small amount of the cubic spinel Zn₂TiO₄. The amount of Zn₂TiO₄ increased with an increase in TiO₂ content. The density and grain size increased with the small TiO₂ content (≤0.01), and then they decreased gradually by further increasing the TiO₂ content. The addition of TiO₂ to ZnO led to a significant increase in the electrical conductivity and a decrease in the absolute value of the Seebeck coefficient, resulting in an increase in the power factor. The highest value of power factor (7.6 × 10⁻⁴ W m⁻¹ K⁻²) was attained for Zn_0.98Ti_0.02O at 1073 K. It is demonstrated that the TiO₂ addition is fairly effective for enhancing thermoelectric properties.     

On ℤ2ℤ2[u]-additive codes

In this paper, a new class of additive codes which is referred to as ?₂ ?₂[u]-additive codes is introduced. This is a generalization towards another direction of recently introduced ?₂ ?₄-additive codes [J. Borges, C. Fernández-Córdoba, J. Pujol, J. Rif´a, and M. Villanueva, ?₂ ?₄-linear codes: Generator matrices and duality, Designs Codes Cryptogr. 54(2) (2010), pp. 167–179]. ?₂ ?₄-additive codes have shown to provide a promising class of codes with their algebraic structure and applications such as steganography. The standard generator matrices are established and by introducing orthogonality the parity-check matrices are also obtained. A MacWilliams-type identity that relates the weight enumerator of a code with its dual is proved. Furthermore, a Gray map that maps these codes to binary codes is defined and some examples of optimal codes which are the binary Gray images of ?₂ ?₂[u]-additive codes are presented.     

Implementation and performance evaluation of a scheduling algorithm for divisible load parallel applications in a cloud computing environment

Cloud computing is an emerging technology in which information technology resources are virtualized to users in a set of computing resources on a pay‐per‐use basis. It is seen as an effective infrastructure for high performance applications. Divisible load applications occur in many scientific and engineering applications. However, dividing an application and deploying it in a cloud computing environment face challenges to obtain an optimal performance due to the overheads introduced by the cloud virtualization and the supporting cloud middleware. Therefore, we provide results of series of extensive experiments in scheduling divisible load application in a Cloud environment to decrease the overall application execution time considering the cloud networking and computing capacities presented to the application's user. We experiment with real applications within the Amazon cloud computing environment. Our extensive experiments analyze the reasons of the discrepancies between a theoretical model and the reality and propose adequate solutions. These discrepancies are due to three factors: the network behavior, the application behavior and the cloud computing virtualization. Our results show that applying the algorithm result in a maximum ratio of 1.41 of the measured normalized makespan versus the ideal makespan for application in which the communication to computation ratio is big. They show that the algorithm is effective for those applications in a heterogeneous setting reaching a ratio of 1.28 for large data sets. For application following the ensemble clustering model in which the computation to communication ratio is big and variable, we obtained a maximum ratio of 4.7 for large data set and a ratio of 2.11 for small data set. Applying the algorithm also results in an important speedup. These results are revealing for the type of applications we consider under experiments. The experiments also reveal the impact of the choice of the platforms provided by Amazon on the performance of the applications under study. Considering the emergence of cloud computing for high performance applications, the results in this paper can be widely adopted by cloud computing developers. Copyright © 2014 John Wiley & Sons, Ltd.     

Probabilistic consensus clustering using evidence accumulation

Machine Learning - Clustering ensemble methods produce a consensus partition of a set of data points by combining the results of a collection of base clustering algorithms. In the evidence...