Nachgiebiger Elektrodenträger für Cochlea-Implantate mit fluidischer Aktuierung

The cochlear implant, consisting of a compliant electrode carrier (ET) and embedded electrodes with contact wires, is an auditory neuroprosthesis, which is surgically inserted into the inner ear (cochlea) in order to create an auditory impression in the hearing-impaired patients. For simplification of the insertion, a fluidically actuated electrode carrier with a changeable curvature is presented. The deformation of the ET is specifically manipulated by applying pressure to its interior and also by a non-stretchable thin fibre or stripe embedded in its wall. An analytical examination of scaling properties allows to use scaled structures for models and measurements. In order to determine the geometry of the ET, a model-based synthesis – FE method combined with analytical modelling – is carried out. The synthesis resulted in a conical shape of the ET with a cylindrical cavity closed at one end and a fiber running parallel to the cavity. Experimental studies on a measuring geometry show a maximum deviation of 0,6 bar at a maximum internal pressure of 6 bar. The investigations show that the proposed synthesis method is suitable for the development of surgical instruments with adjustable curvature.     

Influence of Ultrasonic Waves on the Processing of Cotton with Cationic Softener

In recent years, the textile industry has been forced to develop new technologies to reduce energy and water consumption. The use of ultrasound in textile wet processing is one solution to this problem. The aim of this work was to investigate the effects of ultrasonic energy on the processing of cotton with a cationic softener. For this purpose, cotton fabric was treated with a fatty acid amide derivative cationic softener in water using ultrasonic energy during treatment. The physical properties of the fabrics treated under different conditions are discussed. The results show that the treatment of fabrics with softeners in an ultrasound bath is more effective compared to conventional methods and that it enhances the physical properties of the cotton.     

Soft chemistry preparation of layered Al0.3V2O5·5H2O

A novel layered compound Al_0.3V₂O₅·5H₂O was successfully prepared and characterized using powder X-ray diffraction, Thermal analysis, scanning and transmission electron microscopes. The new layered Al_0.3V₂O₅·5H₂O has like-nanowires shape and the layered structure was stable until 400 °C. At higher temperature (500 °C), it decomposes to orthorhombic Al_xV₂O₅ and triclinic AlVO₄.     

Morphometric,quantitative, and three‐dimensional analysis of the heart muscle fibers of old rats: Transmission electron microscopy and high‐resolution scanning electron microscopy methods

This research investigated the morphological, morphometric, and ultrastructural cardiomyocyte characteristics of male Wistar rats at 18 months of age. The animals were euthanized using an overdose of anesthesia (ketamine and xylazine, 150/10 mg/kg) and perfused transcardially, after which samples were collected for light microscopy, transmission electron microscopy, and high‐resolution scanning electron microscopy. The results showed that cardiomyocyte arrangement was disposed parallel between the mitochondria and the A‐, I‐, and H‐bands and their M‐ and Z‐lines from the sarcomere. The sarcomere junction areas had intercalated disks, a specific structure of heart muscle. The ultrastructural analysis revealed several mitochondria of various sizes and shapes intermingled between the blood capillaries and their endothelial cells; some red cells inside vessels are noted. The muscle cell sarcolemma could be observed associated with the described structures. The cardiomyocytes of old rats presented an average sarcomere length of 2.071 ± 0.09 μm, a mitochondrial volume density (Vv) of 0.3383, a mitochondrial average area of 0.537 ± 0.278 μm², a mitochondrial average length of 1.024 ± 0.352 μm, an average mitochondrial cristae thickness of 0.038 ± 0.09 μm and a ratio of mitochondrial greater length/lesser length of 1.929 ± 0.965. Of the observed mitochondrial shapes, 23.4% were rounded, 45.3% were elongated, and 31.1% had irregular profiles. In this study, we analyzed the morphology and morphometry of cardiomyocytes in old rats, focusing on mitochondria. These data are important for researchers who focus the changes in cardiac tissue, especially changes owing to pathologies and drug administration that may or may not be correlated with aging. Microsc. Res. Tech., 2013. © 2012 Wiley Periodicals, Inc.     

Fine Structure of Bacterial Adhesion to the Epithelial Cell Membranes of the Filiform Papillae of Tongue and Palatine Mucosa of Rodents: A Morphometric,TEM, and HRSEM Study

The palatine mucosa and filiform papillae of the dorsal tongue mucosae of rodents were examined using transmission electron microscopy (TEM) and high resolution scanning electron microscopy (HRSEM). In the HRSEM method, the samples were fixed in 2% osmium tetroxide, dehydrated in alcohol, critical point‐dried, and coated with gold‐palladium. In addition, the HRSEM technique was used for morphometric analysis (length, width, and length/width ratio of cocci and bacilli). For the TEM method, the tissues were fixed in modified Karnovsky solution (2.5% glutaraldehyde, 2% formalin in 0.1M sodium phosphate buffer, pH 7.4) and embedded in Spurr resin. The results demonstrated that there are thick polygonal keratinized epithelial cells where groups of bacteria are revealed in three‐dimensional images on the surface of filiform papillae in these animals. The bacterial membranes are randomly attached to the microplicae surface of epithelial cells. Morphometrics showed higher values of length and width of cocci in newborn (0 day) as compared to newborn (7 days) and adults animals, the bacilli showed no differences in these measurements. At high magnification, the TEM images revealed the presence of glycocalyx microfilaments that constitute a fine adhesion area between bacterial membranes and the membranes of epithelial microplicae cells. In conclusion, the present data revealed the fine fibrillar structures of bacteria that facilitate adhesion to the epithelial cell membranes of the oral cavity and morphometric changes in newborn (0 day) rats as compared with other periods. Microsc. Res. Tech. 76:1226–1233, 2013. © 2013 Wiley Periodicals, Inc.     

Computer Simulation for Construction Education Using the Structure-Behavior-Function Theory: A Pilot Study on Learning Estimating Concepts

A computer simulation based on the structure-behavior-function (SBF) theory is developed and tested to study its impact on teaching construction estimating. While students eventually excel at estimating, grasping basic estimating concepts often presents a challenge to many students when they start learning estimating. It requires students to have a solid understanding about the relationship between actual construction and a typical estimating process to derive a good estimate. A computer simulation of a simple construction estimating process presents an opportunity for students to meet the challenge. One hundred and nine junior year students in a construction management department at a major state university in the southeastern United States participated in the study. The experimental group had sixty students using the simulation; while the control group had forty-nine students without using the simulation. The results showed that the simulation significantly improved students in learning both estimating concepts and processes (p = .05) and a significant portion (90%) of students felt that the simulation was helpful in learning estimating, but inconsistencies exist. The authors also identified and discussed limitations related to the findings.     

Design optimization of cold-formed steel portal frames taking into account the effect of building topology

Cold-formed steel portal frames are a popular form of construction for low-rise commercial, light industrial and agricultural buildings with spans of up to 20 m. In this article, a real-coded genetic algorithm is described that is used to minimize the cost of the main frame of such buildings. The key decision variables considered in this proposed algorithm consist of both the spacing and pitch of the frame as continuous variables, as well as the discrete section sizes. A routine taking the structural analysis and frame design for cold-formed steel sections is embedded into a genetic algorithm. The results show that the real-coded genetic algorithm handles effectively the mixture of design variables, with high robustness and consistency in achieving the optimum solution. All wind load combinations according to Australian code are considered in this research. Results for frames with knee braces are also included, for which the optimization achieved even larger savings in cost.     

Oxidation of carbon by CeO2: Effect of the contact between carbon and catalyst particles

The oxidation of carbon black, CB, in presence of CeO₂ is investigated to gain a better understanding of the effect of the contact between the two solids during this reaction. Different CB/CeO₂ mixtures are tested in a fixed bed reactor. The experimental data are used to propose a model for CB oxidation in presence of CeO₂. It accounts for the size distribution of CeO₂ particles, the contact area between CB and CeO₂, the mass of CB in the sample and the initial ratio CB/CeO₂. Corresponding kinetic parameters are determined.     

前言

设施行业在过渡到信息时代的过程中,将面临巨大挑战。这种转化将打破我们习惯已久的工作方式。我们所有的业务过程都需要重新被检验,而且多数情况下要进行改变,进而从他人提供的数据中获益。我们的业务定会受益于来源权威且连接可靠的信息,进而保存为可用的格式。这样,信息可以流通到需要它的人们那里,而不需要他们重新收集、解密这些信息。设施行业已经开始向前走了。然而,今天我们所采取的BIM实施的步骤,是完全各行其事的。每个人都有不同的经