Ceres-net: A low-cost computer network

This paper describes a local-area network, its hardware and software structure, and its protocol. The principal objective was to minimize the complexity of hardware and software, yet to offer an adequate functionality and performance for a system of up to 30 workstations with local file stores. The primary benefit of the achieved simple structure and low-overhead protocol is the system's reliability.     

Satellite-based snow identification and its impact on monitoring photovoltaic systems

Earth observation allows the separation of snow cover and cloudiness using multispectral measurements. Several satellite-based snow monitoring services are available, ranging from regional to world-wide scales. Using these data enables photovoltaic (PV) plant management to differentiate between failures due to snow coverage on a PV system and other error sources. Additionally, yield estimates for solar siting are improved. This paper presents a validation study from January to April 2006 comparing satellite-based datasets with ground measurements from German and Swiss meteorological stations. A false alarm rate, an error due to irradiance underestimation, the availability of daily data, and the classification accuracy are introduced as quality metrics. Compared to Switzerland, generally a higher accuracy is found in all datasets for Southern Germany. The most significant difference among the datasets is found in the error pattern shifting from too much snow (which results in an error due to underestimation of irradiance) to too little snow detection, causing a false alarm in PV monitoring.Overall, the data records of the Land Surface Analysis Satellite Application Facility (LSA SAF), the German Aerospace Center (DLR) and the Interactive Multisensor Snow and Ice Mapping System (IMS) are found to be most suitable for solar energy purposes. The IMS dataset has a low false alarm rate (4%) and a good data availability (100%) making it a good choice for power plant monitoring, but the error due to underestimation relevant in site auditing is large with 59%. If a cumulative snow cover algorithm is applied to achieve information every day as needed both for power plant monitoring and site auditing, both the DLR and the LSA SAF datasets are comparable with classification accuracies of 70%, false alarm rates of 37% and 34%, respectively, and errors due to irradiance underestimation in 26% and 27% of all coincidences.     

Perthes disease--results of a containment-oriented therapy concept

INTRODUCTION: In a retrospective study a treatment concept for Perthes' disease dependent on the containment was applied. PATIENTS/METHODS: 49 hips of 41 children (9 female, 32 male) were treated between 01. 01. 1990 and 31. 12. 1995. In our concept of treatment a varus femoral osteotomy was performed in 28 cases with not contained hips or less than 4/5 coverage of the femoral head (X-ray/MRI). The other 21 well contained hips with 4/5 coverage or more were treated conservatively with physiotherapy and in case of joint effusion and pain additionally with the use of crutches (partial weight bearing) and anti-inflammatory medication. The average age in the non-operative group at the time of first investigation was 4 years and 9 months (3 y./1 m. to 7 y./1 m.) and 6 years and 3 months (4 y/2 m. to 10 y/0 m.) at our last examination (mean follow up 17.7 months, range of 6 to 72 months). At the time of indication for a varus femoral osteotomy the patients had an average age 6 years and 1 month (3 y./6 m. to 10 y./2 m.), the mean age at the last postoperative examination was 7 years and 11 months (4 y./8 m. to 12 y./5 m.) with an average follow up of 21.5 months (6 to 77 months). RESULTS: For the conservatively treated children we achieved good results (still well contained hips with 4/5 coverage, no decrease of function, no increase of pain) in 85.7% (18 of 21 cases). In 85.7% (24 of 28 cases) we found good results (well contained hips, increase of coverage, no decrease of function, no increase of pain) in the operation group. CONCLUSIONS: The presented concept of therapy in Perthes' disease was practicable for all patients and included the possibility of decision for operative or non-operative treatment. In both groups we achieved good results in 85.7% of the cases.     

Improved approaches to the exact solution of the machine covering problem

For the basic problem of scheduling a set of n independent jobs on a set of m identical parallel machines with the objective of maximizing the minimum machine completion time—also referred to as machine covering—we propose a new exact branch-and-bound algorithm. Its most distinctive components are a different symmetry-breaking solution representation, enhanced lower and upper bounds, and effective novel dominance criteria derived from structural patterns of optimal schedules. Results of a comprehensive computational study conducted on benchmark instances attest to the effectiveness of our approach, particularly for small ratios of n to m.     

Deposition of silicon carbide coatings on titanium alloy with a low pressure R.F. plasma

A low pressure r.f. plasma was applied to deposit SiC coatings onto Ti6A14V substrates. The coatings were deposited onto substrates at temperatures of 140–390°C from a gas mixture of tetramethylsilane (TMS), argon and hydrogen. Scanning electron microscopy, X-ray diffraction and transmission electron microscopy were employed to identify and to characterize the coatings obtained. It was found that the coatings were hexagonal α-SiC of type III. The coating thickness approximately follows a parabolic time law. A maximum rate of deposition was observed in the pressure range 5–6 mbar. The rate of deposition increases with concentration of TMS up to 0.05% and remains approximately constant up to 0.12%     

Boron nitride coatings of steel and graphite produced with a low pressure r.f. plasma

Boron nitride (BN) coatings were deposited onto die steel and graphite substrates with a low pressure r.f. plasma. The coatings were deposited onto substrates at temperatures of 550–620 °C from a gas mixture of argon, NH₃ and BCl₃. X-ray diffraction and scanning electron microscopy were employed to identify and to characterize the coatings. The coatings are mostly amorphous; however, the existence of small amounts of hexagonal BN was identified. The influence on the growth rate of the deposition time and the pressure in the reactor is described.     

Enhancement of Upconverted Fluorescence by Interference Layers

Upconverting nanoparticles show potential applications in the field of photovoltaics and array‐based detection devices. While fluorescence enhancement using interference of incident radiation is well known in Stokes‐shift type systems such as fluorescent dyes; the effect of such interference geometry in nonlinear Anti‐Stokes type emission, such as in upconversion rare earth photophysics is demonstrated for the first time. This work describes in detail the influence of the interference modulation on both the excitation (interion energy transfer) and radiative decay with nonradiative decay processes active between emissive levels. These effects are illustrated in the thickness dependence of the decay rate and rise time. Single particle upconverted spectra and time‐resolved measurements show concurrent optimization of the infrared absorption and emission at 540 and 650 nm, with an average enhanced emission of 20 times at λ = 540 and 45 times at λ = 650 nm, dependent on the interference layer thickness and on the excitation intensity. The experimental results are correlated with finite element modeling. Both experiments and calculations show emission enhancement at an interference layer thickness of about 740 ± 20 nm, where such tolerance and the planar design, leads to ease in implementation in applications.     

Microstructural Evolution of Silica on Single Crystal Silicon Carbide. Part II: Influence of Impurities and Defects

Passive oxidation of single crystal silicon carbide (6H–SiC) resulted in the formation of a vitreous silica layer which crystallized gradually at temperatures near 1300°–1400°C. During this process, statistically distributed devitrification centers appeared and disk-like aligned crystal plates (radialites) formed. The crystallization process did not necessarily start at structural defects although these often act as areas of preferred nucleation. A second structural transition from disk-like radialites to small crystalline spheres (globulites) was not connected to structural defects but a consequence of the presence of impurities. Alkaline and earth-alkaline elements are common contaminations within the atmospheres of typical furnaces fitted with alumina tubes. Globulite formation was a process of recrystallization catalyzed by an impurity-related melt formed on top of the devitrified areas. Crystallization caused exsolution of reaction gas and local impurity enrichments as the solubility for these phases is much higher in the devitrifying vitreous silica matrix. Both clean and impurity-loaded oxidation produced specific morphologies of scales and interfaces.