3D velocity from 3D Doppler radial velocity

We present local least squares and regularization frameworks for computing 3D velocity (3D optical flow) from 3D radial velocity measured by a Doppler radar. We demonstrate the performance of our algorithms quantitatively on synthetic radial velocity data and qualitatively on real radial velocity data, obtained from the Doppler radar at Kurnell Radar station, Botany Bay, New South Wales, Australia. Radial velocity can be used to predict the future positions of storms in sequences of Doppler radar datasets.© 2005 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 189–198, 2005     

Experimental determination of NH<Subscript>4</Subscript>NO<Subscript>3</Subscript>-KNO<Subscript>3</Subscript> binary phase diagram

The solid-state phase transitions in ammonium nitrate (AN)-potassium nitrate (KN) system, and the equilibrium AN-KN phase diagram have been determined by using differential scanning calorimetry and high-temperature in situ x-ray diffractometry. Sample preparation was performed in a special “dry room” with very low humidity. A single phase region (AN III) with no phase transitions to 373 K was observed in the composition range 5 to 20% KN; this is critical for use in air bag gas generators. The high-temperature KN phase (KN I) has a wide range of stability from 20 to 100 wt.% KN. There are one eutectic, two eutectoid, three peritectoid, and one congruent transformations in this phase diagram. Two new nonstoichiometric phases were found at lower temperatures in the mid-composition range between the AN and KN terminal solid solutions. Details of the phase equilibria are presented.     

Microstructures formed by spray freezing of food fats

The spray-freezing of two food fats, tripalmitin (PPP) and cocoa butter (CB) and mixtures thereof, has been modeled experimentally using a novel single droplet freezing apparatus configured so that temperature profiles or samples for microstructure analysis can be obtained. For 2 mm diameter droplets suspended in a cold air flow at temperatures around 2–15°C, initial cooling rates were on the order of 10 K s⁻¹ and the temperature profiles could be correlated directly to DSC data collected at 20 K min⁻¹, indicating that minimal supercooling of the materials occurred in the droplet form. Microstructure analysis confirmed that PPP crystallized preferentially in mixtures, and that the surface structure was very sensitive to storage conditions. The bulk structure was much less sensitive, and the internal microstructure of the PPP droplets revealed distinct nucleation sites, which were absent from the CB: These persisted in the mixtures up to 50 wt%. X-ray analysis indicated that the fats crystallized in their more stable forms, namely, β for PPP and Form V/V1 in CB.     

Quantum Dots-Based Optical Fiber Temperature Sensors Fabricated by Layer-by-Layer

Two types of CdTe quantum dots of different sizes (4 and 5 nm) were successfully deposited on optical fibers using the layer-by-layer electrostatic self-assembly method. The sensors showed a linear and reversible variation of the emission wavelength for a temperature range from 30 degC to 100 degC, with a sensitivity of 0.2 nm/degC     

Sensitivity analysis in conjunction with evidence theory representations of epistemic uncertainty

Three applications of sampling-based sensitivity analysis in conjunction with evidence theory representations for epistemic uncertainty in model inputs are described: (i) an initial exploratory analysis to assess model behavior and provide insights for additional analysis; (ii) a stepwise analysis showing the incremental effects of uncertain variables on complementary cumulative belief functions and complementary cumulative plausibility functions; and (iii) a summary analysis showing a spectrum of variance-based sensitivity analysis results that derive from probability spaces that are consistent with the evidence space under consideration.     

A process-dependent real-time controller for sequencing batch reactor plants: results of full-scale operation.

This paper presents results of a research project, in which a process-dependent real-time control (RTC) strategy for a sequencing batch reactor plant was realised in full-scale. The cycle controller is based on NH4 analysers, NO3 probes, TSS probes and sludge level probes. With this new RTC strategy it was possible to increase the treatment capacity by 50%. By implementation of the new controller the TN, TP and NH4-N treatment efficiency could be improved significantly, too. The treatment efficiency concerning COD is comparable.     

Comment on “Nonlinear optimal tracking control with application to super-tankers for autopilot design” by T. Çimen and S.P. Banks

A recent paper by Çimen and Banks [2004. Nonlinear optimal tracking control with application to super-tankers for autopilot design. Automatica, 40(11), 1845–1863] on optimal control system design for oil tanker propulsion and heading highlighted the importance of accurately representing the dynamics of such a vessel. Results presented in that paper are based on a simulation model that provides unrealistic results for an oil tanker of the size considered. Therefore, the results obtained from the simulated ship control problem are not representative of the physical system being considered. In this communication an alternative, more realistic model is presented and discussed with reference to the original publications that define the ship model dynamics.     

Sandia National Laboratories Validation Workshop: Structural dynamics application

This article specifies a virtual structural dynamic subsystem and some systems, as well as mathematical models that approximately simulate them. The purpose is to define a setting for model validations conceived by participants in the Sandia National Laboratories Validation Workshop. Some broad guidelines for the model validations are set, as well as a regulatory requirement to be satisfied by the target system. Participants are directed to present techniques for subsystem model validation, to analytically predict whether or not the regulatory requirement will be met, and to estimate the likelihood of accuracy of the prediction.     

A simple technique to minimize heat damage to specimens during thermal polymerization of LR White in plastic and gelatin capsules

London Resin (LR) White is a commonly used resin for embedding specimens to be used for immuno- and/or cytochemical studies. In some instances, due to either the properties of the specimen or the availability of various reagents and equipment, it becomes necessary and/or more convenient to polymerize LR White using heat rather than chemical accelerators or UV light. It is known, however, that heat can reduce or even eliminate the anti genicity of the tissue being embedded. It is therefore desirable to polymerize specimens at the lowest temperature possible and to remove the specimens from the oven as soon as polymerization is complete. We have developed a technique that provides a visual marker that allows the exothermic polymerization of LR White to be monitored, thus minimizing the amount of time a specimen must stay in the oven while excluding oxygen from capsules of polymerizing LR White.     

Structural and Superconducting Property Variations with Nominal Mg Non‐Stoichiometry in MgxB2 and Its Enhancement of Upper Critical Field

By applying a combination of characterisation tools, changes in structural and superconducting properties with nominal Mg non‐stoichiometry in Mg_xB₂ are found. The non‐stoichiometry produces enhanced in‐field critical current densities (J_c's) and upper critical field / irreversibility field (H_c2/H_irr(T)) values. Upper critical fields of ～ 21 T (4.2 K) were obtained in nominal Mg‐deficient samples compared to ～ 17 T (4.2 K) for near‐stoichiometric samples.