Design for excess capability to handle uncertain product requirements in a developing world setting

Products designed for the developing world often go unused or underused by the intended customers. One cause of this problem is uncertainty regarding the actual requirements of customers in the developing world. This can result when designers, with experience in technologically advanced countries, apply their own value structure to the products they design. Because of the designers’ lack of experience in the culture and environment of the developing world, the actual requirements are only partially known to them. This problem can be mitigated by (i) optimizing product flexibility and adaptability to react to uncertain requirements, and (ii) reducing the most critical uncertainties. The flexibility of a product to adapt to new or changing requirements has been shown to extend the service life of large complex engineered systems (e.g., aircraft carriers, aircraft, communication systems, and space craft). These systems must remain in service for extended periods of time, even though the environments and requirements may change dramatically. Applying these proven techniques to products designed for the developing world can alleviate the problem of uncertain requirements. This paper presents and demonstrates a technique aimed at improving the success of developing world engineering projects. Flexibility and adaptability minimize the impact of uncertainties, and are enabled by numerically optimized amounts of designed-in excess. A sensitivity analysis performed on the system model helps the designer prioritize the set of uncertain requirements and parameters for refinement. The technique is demonstrated in the design of a cookstove intended for use in the developing world.     

The politics of co-design in ICT for sustainable development

ABSTRACT

In this paper, we discuss an approach to co-design in ICT for sustainable development. We first set out to consider sustainable development as incorporate a concern for resilience, adaptability, and autonomy. We then draw on an ongoing participatory design project to illustrate how co-design projects can be configured, along with the political choices that this entails, to support such development.     

Literature review--efficacy of various disinfectants against Legionella in water systems

There have been reported outbreaks of Legionnaires' disease at hospitals and industrial facilities, which prompted the development of various preventive measures. For example, Ford has been developing and implementing such a measure at its facilities worldwide to provide technical guidance for controlling Legionella in water systems. One of the key issues for implementing the measure is the selection of a disinfectant(s) and optimum conditions for its use. Therefore, available publications on various disinfectants and disinfection processes used for the inactivation of Legionella bacteria were reviewed. Two disinfection methods were reviewed: chemical and thermal. For chemical methods, disinfectants used were metal ions (copper and silver), oxidizing agents (halogen containing compounds [chlorine, bromine, iodine, chlorine dioxide, chloramines, and halogenated hydantoins], ozone, and hydrogen peroxide), non-oxidizing agents (heterocyclic ketones, guanidines, thiocarbamates, aldehydes, amines, thiocyanates, organo-tin compounds, halogenated amides, and halogenated glycols), and UV light. In general, oxidizing disinfectants were found to be more effective than non-oxidizing ones. Among oxidizing agents, chlorine is known to be effective and widely used. Among non-oxidizing agents, 2,2-dibromo-3-nitropropionamide appears to be the most effective followed by glutaraldehyde. Isothiazolin (known as Kathon), polyhexamethylene biguanide, and 2-bromo-2-nitropropionamide (known as Bronopol) were found to be less effective than glutaraldehyde. Thermal disinfection is effective at > 60 degrees C (140 degrees F).     

Roles of subsidiary managers in multinational corporations: The effect of dual organizational identification

Abstract and Key Results

Optical detection of ion-channel-induced proton transport in supported phospholipid bilayers

The integration of ion-channel transport functions with responses derived from nanostructured and nanoporous silica mesophase materials is demonstrated. Patterned thin-film mesophases consisting of alternating hydrophilic nanoporous regions and hydrophobic nanostructured regions allow for spatially localized proton transport via selective dimerization of gramicidin in lipid bilayers formed on the hydrophilic regions. The adjoining hydrophobic mesostructure doped with a pH sensitive dye reports the transport. The ease of integrating functional membranes and reporters through the use of patterned mesophases should enable high throughput studies of membrane transport.     

Post-processing application of chemical solutions for control of Listeria monocytogenes, cultured under different conditions, on commercial smoked sausage formulated with and without potassium lactate-sodium diacetate

This study evaluated post-processing chemical solutions for their antilisterial effects on commercial smoked sausage formulated with or without 1.5% potassium lactate plus 0.05% sodium diacetate, and contaminated (approximately 3-4 log cfu/cm(2)) with 10-strain composite Listeria monocytogenes inocula prepared under various conditions. Inoculated samples were left untreated, or were immersed (2 min, 25 +/- 2 degrees C) in solutions of acetic acid (2.5%), lactic acid (2.5%), potassium benzoate (5%) or Nisaplin (0.5%, equivalent to 5000 IU/ml of nisin) alone, and in sequence (Nisaplin followed by acetic acid, lactic acid or potassium benzoate), before vacuum packaging and storage at 10 degrees C (48 days). Acetic acid, lactic acid or potassium benzoate applied alone reduced initial L. monocytogenes populations by 0.4-1.5 log cfu/cm(2), while treatments including Nisaplin caused reductions of 2.1-3.3 log cfu/cm(2). L. monocytogenes on untreated sausage formulated with antimicrobials had a lag phase duration of 10.2 days and maximum specific growth rate (mu(max)) of 0.089 per day, compared to no lag phase and mu(max) of 0.300 per day for L. monocytogenes on untreated product that did not contain antimicrobials in the formulation. The immersion treatments inhibited growth of the pathogen for 4.9-14.8 days on sausage formulated without potassium lactate-sodium diacetate; however, in all cases significant (P < 0.05) growth occurred by the end of storage. The antilisterial activity of chemical solutions was greatly enhanced when applied to product formulated with antimicrobials; growth was completely inhibited on sausage treated with acetic or lactic acid alone, and in sequence with Nisaplin. In general, habituation (15 degrees C, 7 days) of L. monocytogenes cells, planktonically or as attached cells to stainless-steel coupons in sausage homogenate prior to contamination of product, resulted in shorter lag phase durations compared with cells cultivated planktonically in a broth medium. Furthermore, when present, high levels of spoilage flora were found to suppress growth of the pathogen. Findings of this study could be useful to US meat processors in their efforts to select required regulatory alternatives for control of post-processing contamination in meat products.     

A predictive model for the effect of temperature and predrying treatments in reducing Listeria monocytogenes populations during drying of beef jerky

The objective of this study was to model the effect of drying temperatures (52, 57, and 63 degrees C) and predrying treatments on the inactivation of Listeria monocytogenes on beef jerky. Before drying, beef slices were inoculated with a 10-strain composite of L. monocytogenes and then treated with the following: (i) nothing (C), (ii) traditional marinade (M), or (iii) dipping in 5% acetic acid solution for 10 min, followed by M (AM). In addition, sequential stresses (exposure to 10% NaCl, followed by an adjustment of the pH to 5.0 and, subsequently, a water bath at 45 degrees C) were applied to the inocula before beef contamination and drying at 63 degrees C. Surviving L. monocytogenes were determined on tryptic soy agar plus 0.6% yeast extract (TSAYE) and on PALCAM agar at 0, 2, 4, 6, 8, and 10 h during drying. Data were modeled by a linear regression (treatment AM) and a logistic-based equation capable of fitting biphasic inactivation curves without initial shoulder (treatments C and M). The total log reductions expressed as the CFU per square centimeter of L. monocytogenes (3.9 to 5.1) for the samples treated with M (3.5 to 5.4) when compared with C were similar, whereas AM-treated samples had higher (6.1 to 6.8) reductions. All survival curves were characterized by an initial rapid decrease in populations within the first 2 h, which was followed by a secondary death phase at a lower rate. No significant (P > or = 0.05) differences in inactivation were observed due to drying temperatures in the range (52 to 63 degrees C) tested. Inactivation differences between recovered counts of stressed and unstressed cells were significant (P < 0.05) in PALCAM but not in TSAYE. The acidified predrying treatment (AM) had higher pathogen inactivation during drying than other treatments, regardless of drying temperature. The models developed may be useful in designing effective drying processes for beef jerky.     

Physical structures of lipid layers on pyrite

The physical structures of lipid layers on pyrite (FeS2), a ubiquitous sulfide mineral, were studied in air and in water by atomic force microscopy (AFM). Egg PC, a phospholipid that forms bilayer structures on atomically flat substrates, was investigated, and our experimental observations show that this lipid formed bilayers on an atomically rough pyrite surface, as inferred by a measured layer thickness of 5.0 +/- 0.2 nm. The surface coverage of the lipid coating increased from approximately 15% to 80% when the concentration of the lipid suspension was increased from 0.014 to 0.15 mM. Although further increases up to 1.5 mM resulted in an incremental increase in surface coverage of only 5%, multilayer structures of 20- to 40-nm height formed on top of the first bilayer. The findings provide a structural explanation for the results of earlier kinetic studies showing that the presence of the lipid decreases the rate of pyrite oxidation in air and in water. Lipid coatings applied to iron-sulfide bearing minerals are a possible approach to preventing oxidation and acidification and thereby mitigating environmental damage that can result from acid mine drainage.     

Semi-parametric estimation in the compositional modeling of multicomponent systems from Raman spectroscopic data

Identification and quantification of molecular species are central applications of molecular spectroscopy. In complex multicomponent systems like tissue samples, linear parametric models are often used to estimate the relative concentrations of the biochemical components of the sample. In situations where not all of the components of the sample are known or modeled, such parametric models can suffer from omitted variable bias and result in skewed estimates of component concentrations. We propose a semi-parametric approach that tries to avoid this omitted variable bias by effectively including unknown covariates as a non-parametric term in the regression equation. Constituent concentrations estimated with such partial linear models should outperform strict parametric linear models when the user has limited information on the composition of a multi-constituent system.