硫在铅熔炼过程中的行为分析

介绍了铅烧结焙烧-鼓风炉还原熔炼过程中硫的分布及存在形态，着重分析了混合料含硫量与结块率的关系，得出了混合料含硫的临界值。论述了烧结块中残留的硫离子及硫酸根离子对铅熔炼生产的影响。针对硫的不同存在形态，提出了有效的解决办法和改进措施。     

TMN协议的攻击及其分类研究

对TMN协议的攻击进行分析，并从协议应该确保的安全日标，即保密性和认证性入手，结合采用的攻击方法对现有的攻击进行分类。     

Resource management in the next-generation DS-CDMA cellular networks

Direct sequence code-division multiple access has been shown as the predominant access technology to provide high-speed multimedia services in next-generation wireless cellular networks. The DS-CDMA cellular network significantly differentiates itself from the traditional narrowband TDMA/FDMA system, in which great capacity gain can be explored by taking advantage of its unique characteristics. This article addresses resource management in DS-CDMA cellular networks. We first provide an overview of the DS-CDMA network and discuss the main challenges in the design of resource management schemes. We then examine several critical issues within the scope of resource management, including congestion control, rate and power control, and cell planning, with the emphasis on call admission control. Finally, we offer some insights and discussions on the performance aspects, strengths, and weaknesses of existing proposals.     

In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

基于曲线进化的目标检测算法

提出了基于曲线进化的运动目标检测算法。对于运动目标检测问题定义了新颖的能量模型,并给出了相应的曲线进化方程。结合水平集算法,所提出的曲线进化模型能够自动的适应拓扑变化,检测出多个运动目标区域及轮廓。从计算物理学领域引入基于偏微分方程的水平集窄带算法,在构造窄带时无需显示的知道曲线的位置,并能够快速的实现。     

重油催化装置试运转技术分析

中石油宁夏大元炼油化工有限责任公司2套60万 t/aRFCCU,采用逆流两段再生新工艺,对投料试生产期间出现的问题进行技术分析,同时对装置操作特点等进行总结分析     

利用MAFIA软件模拟耦合腔慢波结构的冷测特性

利用MAFIA软件对休斯结构的耦合腔慢波结构的色散特性和耦合阻抗进行了模拟,同实验数据相比,其计算精度是令人满意的,从而为耦合腔行波管的生产和研发提供了一个便捷而有力的工具.     

阳离子交换树脂铁中毒的复苏研究

软化器中使用的阳离子交换树脂容易受到铁离子的污染。采用均匀设计的方法,利用回归分析和最优化技术,研究了复苏剂中各组分对阳离子复苏效果的影响,得出了最佳复苏配方,开发出了一种新的复苏方法。这种方法具有腐蚀性低和复苏效果良好的特点,为生产现场树脂的复苏提供了有益的借鉴。     

管板现场堵漏焊接中的技术要点

在对列管进行堵管时 ,如果堵头形状和加工尺寸不合理 ,焊接工艺不当 ,在焊缝处极易出现气孔、裂纹等现象 ,在仰焊时还易出现夹渣现象 ,造成新的泄漏。因此 ,管板现场堵漏时要注意以下几点 :1 )焊接材料的选择由于现场管板堵漏时列管内介质很难清除干净 ,特别是列管内存在少量水     

成组技术和造船模式的发展

本文论述了ＧＴ是造船模式进步的思想基础，并阐明了ＧＴ在ＳＣＩＭＳ中的作用．