Thermopower of YBa2Cu3O7-δ–Ag Composites

The percolation behavior of normal-state thermopower, resistivity, and superconductivity have been studied in YBa₂Cu₃O_7-δ─Ag (YBCO─Ag) composite systems. The normal-state resistivity and thermopower show a percolation threshold at a Ag volume fraction ( V _Ag) of 20% to 30%, whereas the superconducting network shows a threshold at a V _Ag of ≅70% to 80%. The results obtained from this study show that the YBCO─Ag composite obtained from Ag₂O and YBCO powders is uniformly distributed with Ag and YBCO remaining as separate phases without changing their characteristics. The measurements of thermopower indicate that the normal-state thermopower and phonon-drag thermopower are affected by the Ag addition. The stability of YBCO is increased when it is in composite form.     

Cationic polymerizations at elevated temperatures by novel initiating systems having weakly coordinating counteranions2. Isobutylene/isoprene copolymerizations

As a sequel to our studies on isobutylene (IB) homopolymerizations, we have investigated the copolymerization of IB/isoprene (IP) mixtures containing up to ∼20 mole% IP in the feed by the use of the in situ (CH₃)₃Si[B(C₆F₅)₄] initiating system in close-to-neat monomers in the temperature range from −35 to −8 (reflux)°C. The effects of temperature and IB/IP feed ratio on copolymer molecular weights were determined and compared with those produced by AlCl₃. The molecular weights of butyl rubbers obtained by the novel initiating system under a variety of conditions are invariably and significantly higher than those made with AlCl₃. High molecular weight gel-free rubbers containing up to ∼5 mol% unsaturation can be obtained at relatively high temperatures. Copolymer compositions can be controlled by the IB/IP ratio in the feed. Product molecular weights decrease with increasing IP content. To gain insight into the copolymerization mechanism, the activation enthalpy of molecular weights (ΔH^‡=−5.9 kcal/mol, −24.7 kJ/mol) and the reactivity ratios (r_IB= 1.8, r_IP= 1.5) have been determined. Received: 8 July 1998/Revised version: 16 October 1998/Accepted: 16 October 1998     

Natural rubber composites reinforced with sisal/oil palm hybrid fibers: Tensile and cure characteristics

Natural rubber was reinforced with untreated sisal and oil palm fibers chopped to different fiber lengths. The influence of fiber length on the mechanical properties of the hybrid composites was determined. Increasing the fiber length resulted in a decrease in the properties. The effects of concentration on the rubber composites reinforced with sisal/oil palm hybrid fibers were studied. Increasing the concentration of fibers resulted in a reduction in the tensile strength properties and tear strength but an increase in the modulus of the composites. Fiber breakage analysis was evaluated. The vulcanization parameters, processability characteristics, and stress–strain properties of these composites were analyzed. The extent of fiber alignment and the strength of the fiber–rubber interface adhesion were analyzed from the anisotropic swelling measurements. Scanning electron microscopy studies were performed to analyze the fiber/matrix interactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2305–2312, 2004     

Hydrogen and Oxygen Bubble Attachment to a Bitumen Drop

Air bubble – bitumen attachment is a critical step in the flotation of bitumen from mined oil sand. In this study, single bubble – bitumen drop attachment was observed directly using a novel experimental technique. Induction time is determined and used as an indication of bubble‐bitumen attachment potency for both hydrogen and oxygen bubbles. The attachment tests were conducted in deaerated municipal water (City of Edmonton tap water) at temperatures ranging from 22–50°C. Induction times measured for hydrogen bubble attachment were shorter than those for oxygen bubbles. Coalescence tests were also conducted in the absence of bitumen, and showed that hydrogen bubbles coalesced more rapidly than oxygen bubbles in both deaerated municipal water and clear (solids‐free) process water.     

An optimal usage of NO x in a combined Pt/ceramic foam and a wall-flow monolith filter for an effective NO x -assisted soot oxidation

Topics in Catalysis - An NO2-assisted soot oxidation based filter candidate consists of Pt-coated ceramic foam in combination with a wall-flow monolith is proposed to acquire for an optimal usage...     

Sintering,microwave properties,and circulator applications of textured Sc-substituted M-type ferrite thick films

Sc³⁺ substituted M-type ferrites are effective microwave magnetic materials with a ferromagnetic resonance frequency in the range of 20 GHz–50 GHz. We report on the fabrication of oriented ferrite thick films as microwave components for application in the K_a-band at 30 GHz. Films of BaFe_11.5.Sc_0.5O₁₉ were prepared by screen-printing on alumina substrates, drying in an external magnetic field, and sintering at 900 °C. Low-temperature sintering is achieved through use of a mixed BBSZ/CuO sintering aid. A strong anisotropy of the sintered ferrite films is revealed by XRD analysis. Microwave properties of the films were determined in a coplanar waveguide setup. The ferromagnetic resonance frequency of the films is at 30 GHz and the textured films possess good nonreciprocal properties which scale with film thickness. The films were tested in a Y-junction circulator, and represent promising materials for self-biased microwave components fabricated in thick film technology.     

Application of a Technofunctional Caseinate Hydrolysate to Replace Surfactants in Ice Cream

There is a demand for a clean label of ice cream in the food industry. To meet this requirement, alternative surfactants and hydrocolloids without an additive number have to be found. Here, a caseinate hydrolysate with improved interfacial properties was investigated as such an additive. Replacing only the surfactant resulted in ice cream characteristics, comparable to using a commercial emulsifier (INS 472b). Thus, a clean labeling of the surfactant using this hydrolysate is possible. By contrast, replacing the hydrocolloid additionally led to an unfavorable ice cream texture and stability.     

CO2 capture efficiency in post‐combustion using MWNT‐PAA in a packed bed column

The adsorption capacity of polyaspartamide (PAA) and multi‐wall carbon nanotubes with polyaspartamide (MWNT‐PAA) was investigated through a packed bed column with the flowing of flue gas composed of 15 % CO₂, 5 % O₂ and the balance N₂. The adsorption performed at 25 °C, 110 kPa and inlet gas flow rate of 60 mL/min resulted in high CO₂ adsorption capacity of 5.70 and 10.20 mmol‐CO₂/g for PAA and MWNT‐PAA, respectively. The adsorption kinetics was very high, so 7 min were enough for the effluent gas to reach the breakthrough after saturation. The consistency of adsorbents in recurring regeneration was successful through a continuous TSA system of 10 cycle adsorption‐desorption with temperatures of 25–100 °C. The evaluation of heat through differential scanning calorimetry (DSC) resulted in exothermic adsorption with heat release of 45.14 kJ/mol and 124.38 kJ/mol for PAA and MWNT‐PAA, respectively. The heat release was found favourable to promote the desorption as the temperature could rise after adsorption. This is an advantage for energy efficiency, as it depicts the potential of energy recovery. Thus, both adsorbent PAA and MWNT‐PAA were demonstrated to be promising for CO₂ adsorption capture in post‐combustion.     

Thermo-Mechanical Properties of Semi-Degradable Poly(β-amino ester)-co-Methyl Methacrylate Networks under Simulated Physiological Conditions

Poly(β-amino ester) networks are being explored for biomedical applications, but they may lack the mechanical properties necessary for long term implantation. The objective of this study is to evaluate the effect of adding methyl methacrylate on networks’ mechanical properties under simulated physiological conditions. The networks were synthesized in two parts: (1) a biodegradable crosslinker was formed from a diacrylate and amine, (2) and then varying concentrations of methyl methacrylate were added prior to photopolymerizing the network. Degradation rate, mechanical properties, and glass transition temperature were studied as a function of methyl methacrylate composition. The crosslinking density played a limited role on mechanical properties for these networks, but increasing methyl methacrylate concentration improved the toughness by several orders of magnitude. Under simulated physiological conditions, networks showed increasing toughness or sustained toughness as degradation occurred. This work establishes a method of creating degradable networks with tailorable toughness while undergoing partial degradation.