Modeling of Multiphase Transport during Drying of Honeycomb Ceramic Substrates

Multiphase transport model to simulate drying of honeycomb ceramic substrates in a conventional (hot air) drier is developed. Heat and moisture transport in the honeycomb walls as well as channels is modeled. The model predictions are validated against experiments done for drying of cylinder-shaped substrates by comparing histories and axial profiles of moisture loss and point temperature histories at various locations. Drying experiments are performed at two different values of air temperature, 103°C and 137°C, at a relative humidity value of 5%. Sensitivity analysis reveals that the drying process is controlled by heat and water vapor transport. External heat transfer is the dominant resistance mechanism for energy transport, whereas internal convection and binary diffusion dominate the resistance to vapor transport.     

Polyaniline doped with α, ω‐alkanedisulfonic acids: preparation and characterization

The use of α, ω‐alkanedisulfonic acid, HO₃S(CH₂)_nSO₃H (n = 1, 4, 6 and 12), as a dopant for polyaniline (PANi) was investigated. This series of disulfonic acids with varying chain lengths were synthesized and used in the doping of PANi. The doped polymers showed conductivity in the range 10^?2 to 10^?1 S cm^?1. Thermal studies showed that the doped polymers, depending on the chain length of α,ω‐alkanedisulfonic acid, were stable up to ca 300 °C and the thermal stability decreased with increasing dopant chain length. The thermal stability of α,ω‐alkanedisulfonic acid‐doped PANi was higher than that of alkanesulfonic acid‐doped PANi which typically degrades around 250 °C, suggesting a moderately broader processing window for α,ω‐alkanedisulfonic acid‐doped PANi for blending with other thermoplastics. Copyright © 2012 Society of Chemical Industry     

The stability of direct carbon fuel cells with molten Sb and Sb–Bi alloy anodes

The long‐term stability of direct carbon fuel cells, based on solid oxide fuel cells with molten Sb and Sb–Bi anodes, was examined for operation with activated charcoal, rice starch, and bio‐oil fuels at 973 K. With intermittent stirring of the fuel–metal anode interface, the anode performance was stable, and reasonable power densities (～250 mW/cm²) were achieved for periods up to 250 h. With Sc‐stabilized zirconia, severe thinning of the electrolyte occurred in regions of high current flow. No electrolyte thinning was observed with yttria‐stabilized zirconia as the electrolyte operating at the same current densities. © 2012 American Institute of Chemical Engineers AIChE J, 59: 3342–3348, 2013