Singlet Oxygen Quenching Activities of Various Fruit and Vegetable Juices and Protective Effects of Apple and Pear Juices against Hematolysis and Protein Oxidation Induced by Methylene Blue Photosensitization

ABSTRACT:  Effects of various fruit and vegetable juices on rubrene oxidation induced by a chemical source of singlet oxygen in a microemulsion system have been studied. The singlet oxygen quenching activities of fruit and vegetable juices were greatly different with different juices. The apple and pear juices exhibited the highest antioxidative activity among the tested juices in singlet oxygen–induced rubrene oxidation, showing 56.69% and 59.34% inhibition, respectively. The grape, kumquat, red cabbage, and spinach juices also showed relatively strong antioxidative activity against singlet oxygen–induced rubrene oxidation. Lemon juice showed the least activity, resulting in 0.63% inhibition of rubrene oxidation. The singlet oxygen quenching activities of 1 mL of apple and pear juices were equivalent to 33.97 and 34.64 mg ascorbate, respectively. Singlet oxygen quenching activities of juices had very low correlation with both ABTS radical scavenging activity ( R ²= 0.11) and total phenolic contents ( R ² < 0.1). However, a high correlation ( R ²= 0.66) was found between the ABTS radical scavenging activities and total phenolic contents of juices. The apple and pear juices also significantly inhibited both erythrocyte lysis and protein oxidation induced by fluorescence light illumination in the presence of methylene blue. Electron spin resonance (ESR) spectroscopy data showed that the protective activities of these juices against biological damages induced by photodynamic ways were, to at least some extent, due to their singlet oxygen quenching abilities. This represents first report on the singlet oxygen quenching activities of the apple and pear juices, and their protective activities against photodynamically induced biological damages.     

Persistent thrombin generation in humans during specific thrombin inhibition with hirudin

BACKGROUND: The degree to which antithrombotic drugs suppress thrombin generation is unknown. Because hirudin, unlike antithrombin III, binds intravascular thrombin rapidly and selectively to yield a circulating inactive complex of 3- to 4-hour half-life, we used intravenous hirudin in humans to investigate the course of thrombin generation during and early after anticoagulation with this potent, direct antithrombin. METHODS AND RESULTS: Intravascular thrombin was measured with an ELISA for the thrombin-hirudin complex formed during and for 18 hours after stopping a 6-hour infusion of hirudin at 0.1, 0.2, and 0.3 mg.kg-1.h-1 in three groups of six patients each. With free hirudin in 20- to 10,000-fold molar excess of thrombin and peak activated partial thromboplastin times of 2.3 to 3.0 times baseline, mean plasma thrombin-hirudin complex increased from 794 +/- 85 pg/mL (mean +/- SEM) 15 minutes after the start of the infusion to 1617 +/- 151 pg/mL at 6 hours of infusion to 2667 +/- 654 pg/mL at 24 hours. During the 24-hour observation period, plasma concentration of fragment 1.2 (the peptide released during conversion of prothrombin to thrombin) never fell below baseline but rather increased transiently during the hirudin infusion. Plasma concentrations of thrombin-antithrombin III complex (in ng/mL) decreased from 4.34 +/- 0.40 at baseline to 1.64 +/- 0.13 at 6 hours (P < .001) and gradually increased after stopping the infusion to 5.7 +/- 0.87 at 24 hours (nonsignificant compared with baseline). CONCLUSIONS: Measurement of thrombin-hirudin complex may be used as a marker of thrombin generation in humans. Persistent accumulation of thrombin-hirudin complex and generation of fragment 1.2 during and after completion of potent anticoagulation with hirudin suggest thrombin generation is not blocked by high-affinity thrombin inhibition. The persistent formation of thrombin during declining plasma levels of hirudin may contribute to the pathogenesis of rethrombosis early after antithrombin therapy or during inadequate anticoagulation.     

The perinatal mortality rate as an indicator of quality of care in international comparisons

Priming and recollection are expressions of human memory mediated by different brain events. These brain events were monitored while people discriminated words from nonwords. Mean response latencies were shorter for words that appeared in an earlier study phase than for new words. This priming effect was reduced when the letters of words in study-phase presentations were presented individually in succession as opposed to together as complete words. Based on this outcome, visual word-form priming was linked to a brain potential recorded from the scalp over the occipital lobe about 450 ms after word onset. This potential differed from another potential previously associated with recollection, suggesting that distinct operations associated with these two types of memory can be monitored at the precise time that they occur in the human brain.     

Growth of a human intestinal Desulfovibrio desulfuricans in continuous cultures containing defined populations of saccharolytic and amino acid fermenting bacteria

Ecological and physiological effects of the sulphate-reducing bacterium (SRB) Desulfovibrio desulfuricans on other intestinal organisms were investigated in anaerobic chemostats (dilution rate approximately 0.2 h-1). Reproducible defined bacterial communities were used in these experiments, comprising 14 different saccharolytic and amino acid fermenting species: Bifidobacterium longum, Bif. adolescentis, Bif. pseudolongum, Bif. infantis, Bacteroides thetaiotaomicron, Bact. vulgatus, Lactobacillus acidophilus, Enterococcus faecalis, Ent. faecium, Escherichia coli, Clostridium perfringens, Cl. butyricum, Cl. innocuum, Cl. bifermentans. Lactobacillus and Cl. bifermentans populations never rose above minimum detection limits (log10 2.0 and 4.0, respectively) under the experimental conditions employed in these studies. Inclusion of Des. desulfuricans in bacterial cultures (c. log10 8.4 viable cells ml-1) resulted in marked reductions (i.e. greater than 1 log) in planktonic cell population densities of several species, particularly Bif. longum, Cl. perfringens and Bif. pseudolongum. The two bacteroides species were unaffected by Des. desulfuricans, while numbers of Cl. butyricum increased. Extensive wall growth developed in the SRB culture, consisting mainly of Des. desulfuricans (log10 9.2 viable cells ml-1), Bact. thetaiotaomicron and Bact. vulgatus, with lesser numbers of facultative anaerobes, Cl. perfringens and Bif. longum. Wall growth was associated with a reduction in planktonic cell mass and increased acid production by the cultures. Chemotaxonomic study of chemostat microbiotas, on the basis of cellular fatty acid methyl ester (FAME) analyses, showed the existence of characteristic bacteroides (C15) and bifidobacterial (C18) markers, but desulfovibrio markers (i-C15:0, C16:0, i-C17:1) could be identified. The metabolic activities of saccharolytic organisms were altered in the SRB chemostat, including synthesis of a number of hydrolytic enzymes involved in carbohydrate breakdown, such as alpha-galactosidase, alpha-glucosidase and beta-galactosidase, together with several mucinolytic enzymes. High concentrations of sulphide (8.2 mmol 1-1) were detected in the SRB chemostat, suggesting that this metabolite may have been inhibitory to some species. Saccharolytic organisms growing in the SRB fermenter utilized more starch, but less galactose-containing polymers, which correlated with the observed glycosidase activities. Profound differences were also recorded with respect to fermentation product formation in the chemostats, where a major switch to acetate production occurred in the SRB culture, with concomitant reductions in propionate, butyrate and lactate, which is an important electron donor for desulfovibrios.     

Intrathyroidal parathyroid glands can be a cause of failed cervical exploration for hyperparathyroidism

BACKGROUND: The incidence of intrathyroidal parathyroid glands remains controversial. The purpose of this study was to determine the incidence in a series of patients with hyperparathyroidism. METHODS: Three hundred nine patients underwent parathyroidectomy. Patients were divided into two groups: uniglandular disease versus hyperplasia. RESULTS: Eighteen of 309 patients (6%) had abnormal intrathyroidal parathyroid glands. The incidence was 3% (7 of 222) in patients with uniglandular disease versus 15% (11 of 73) in those with hyperplasia. With a mean follow-up of 54 months, 12 patients are eucalcemic, 5 have persistent hypocalcemia, and 1 has recurrent hypercalcemia. There were no recurrent laryngeal nerve injuries. CONCLUSIONS: These data suggest that an intrathyroidal adenoma is an uncommon cause of failure, whereas abnormal intrathyroidal parathyroid tissue may be a more common cause of failure in patients with hyperplasia.     

Nitrogen solubility in high manganese-aluminum alloyed liquid steels

The nitrogen solubility in liquid Fe-Mn and Fe-Mn-Al alloys has been measured by the gas-liquid metal equilibration technique utilizing a high frequency induction furnace under the nitrogen partial pressures of 0.1 to 0.8 atm in the temperature range of 1773 to 1873 K. The variation of the nitrogen solubility with the addition of manganese was measured by sampling and in-situ analysis of nitrogen content. Manganese significantly increased nitrogen solubility in liquid Fe-Mn and Fe-Mn-Al alloys. The nitrogen dissolution followed the Sieverts’ law for liquid Fe-Mn alloys contained manganese up to 26 mass%. Using the Wagner’s interaction parameter formalism, the experimental results were thermodynamically analyzed to determine the first- and second-order interaction parameters of manganese and aluminum on nitrogen in high Mn-Al alloyed liquid steels. No temperature dependence of these values was observed in the temperature range of 1773 to 1873 K. e _N ^Mn = ?0.023, r _N ^MN = 0 r _N ^Mn,Al = 0 (Mn≤26 mass%, Al≤0.4 mass%, 1773–1873 K).     

Read Count Patterns and Detection of Cancerous Copy Number Alterations in Plasma Cell-Free DNA Whole Exome Sequencing Data for Advanced Non-Small Cell Lung Cancer

Plasma cell-free DNA (cfDNA) sequencing data have been widely studied for early diagnosis and treatment response or recurrence monitoring of cancers because of the non-invasive benefits. In cancer studies, whole exome sequencing (WES) is mostly used for discovering single nucleotide variants (SNVs), but it also has the potential to detect copy number alterations (CNAs) that are mostly discovered by whole genome sequencing or microarray. In clinical settings where the quantity of the acquired blood from the patients is limited and where various sequencing experiments are not possible, providing various types of mutation information such as CNAs and SNVs using only WES will be helpful in the treatment decision. Here, we questioned whether the plasma cfDNA WES data for patients with advanced non-small cell lung cancer (NSCLC) could be exploited for CNA detection. When the read count (RC) signals of the WES data were investigated, a similar fluctuation pattern was observed among the signals of different samples, and it can be a major challenge hindering CNA detection. When these RC patterns among cfDNA were suppressed by the method we proposed, the cancerous CNAs were more distinguishable in some samples with higher cfDNA quantity. Although the potential to detect CNAs using the plasma cfDNA WES data for NSCLC patients was studied here, further studies with other cancer types, with more samples, and with more sophisticated techniques for bias correction are required to confirm our observation. In conclusion, the detection performance for cancerous CNAs can be improved by controlling RC bias, but it depends on the quantity of cfDNA in plasma.     

Relation between piezoelectric properties of ceramics and output power density of energy harvester

(1?x)Pb(Zr_0.47Ti_0.53)O₃–xPb[(Zn_0.4Ni_0.6)_1/3Nb_2/3]O₃ [(1?x)PZT–xP(ZN)N] ceramics with 0.26 ≤ x ≤ 0.31 were sintered at 1100 °C, and their energy harvesters were fabricated. All specimens exhibit a similar energy convergence efficiency. However, the transduction coefficient (d₃₃ × g₃₃) increased with x, reaching 21.5 × 10^?15 m²/N for the x = 0.31specimen; the figure-of-merit of the specimens shows a similar variation. The output energy density of the energy harvester also increased with x, and a high output energy density of 231 mW/cm³ was obtained for the harvester fabricated using the x = 0.31 specimen, indicating that the d₃₃ × g₃₃ value significantly affects the output energy density of the energy harvester.     

Luminescent and magnetic properties of cerium-doped yttrium aluminum garnet and yttrium iron garnet composites

Functional materials exhibiting magnetic and luminescent properties have been recognized as an emerging class of materials with great potential in advanced applications. Herein, properties of multifunctional ceramic composites consisting of two garnets, luminescent cerium-doped Y₃Al₅O₁₂ (Ce:YAG) and magnetic Y₃Fe₅O₁₂ (YIG), are reported. On increasing the sintering temperature, both the photoluminescence and saturation magnetization of the Ce:YAG-YIG composites decreased gradually because of the interdiffusion of trivalent ions such as Al³⁺ and Fe³⁺. At a constant sintering temperature of 1100?°C, the YIG contents in the composites increased, thereby causing their luminescent properties to degrade and the saturation magnetizations to increase. For application to electronics, Ce:YAG-YIG composite thin films were integrated on quartz substrates by sputtering the ceramic target. The composite thin films exhibited both magnetic and luminescent properties after annealing. These techniques facilitate the incorporation of multifunctional nanocomposites into various devices.     

Petri-net based scheduling strategy for semiconductor manufacturing processes

Semiconductor manufacturing is a highly automated and capital-intensive industrial process. The operating cost of a wafer processing plant is in general closely related to the design and management of its process flows. Traditionally, the task of production scheduling is performed manually on the basis of past experiences. There are thus real incentives to develop a systematic approach to construct a mathematical programming model in order to reduce the chance of human errors and to ensure operational efficiency in implementing the resulting schedules. To this end, the Petri nets are adopted in this work to accurately model the semiconductor manufacturing activities. The token movements in a Petri net are represented with the well-established scheduling model for batch chemical processes, and the optimal schedule of the given semiconductor process can then be determined accordingly. The feasibility and effectiveness of this scheduling strategy is demonstrated in the present paper with three examples, i.e., the final test process, the re-entrant flow process, and the photolithography-etching process.