Structural studies on γ-MnO2 by transmission electron microscopy

Single-crystal electron diffraction patterns were obtained on five specimens of -MnO₂: one natural, two electrolytical (EMD) and two chemical (CMD) samples. EMDs are best described by the orthorhombic structure proposed by De Wolff which is derived from the ramsdellite structure. A CMD prepared from MnCO₃ fits the hexagonal cell of -MnO₂. Flaky grains from the natural sample and fibres from a CMD prepared from Mn(NO₃)₂ are hexagonal with a new cell:a 0.494,c 0.539 nm. No simple relation between chemical composition, morphology and structure could be found.     

Clinical Determination of Dry Body Weight

While nephrologists wait for the ideal, non invasive, inexpensive, precise, and reproducible tool to evaluate extracellular volume (ECV), they need to exert their clinical acumen in the quest of that holy grail, dry weight (DW). Estimation of DW using a clinical approach based on blood pressure (BP) and ECV is feasible and reliable as shown by successful experiences in various dialysis modes over more than three decades. But a need still exists to resolve difficulties associated with accurate assessment of BP (methods and circumstances of measurement, and the confounding effects of antihypertensive drugs) and ECV (evaluation of weight changes unrelated to ECV, lack of specificity and sensitivity of clinical symptoms, lag time, confusion in terminology). An essential point in clinical assessment of DW is that a normal BP is at the same time the target and the crucial index of DW achievement. For this reason, a trialand‐error “probe” process has to be used at intervals to make sure that the dry weight target point is correctly estimated. The various “non clinical” methods proposed for dry weight assessment increase the complexity and the cost of hemodialysis. They are, in the present state of things, more clinical research than practice tools. They do not replace clinical judgment.     

PWR steam generator R&D in France: thermal-hydraulic and vibratory aspects

Concomitant with the launching of the French pressurized water reactor (PWR) nuclear power program, a large research and development (R&D) effort was initiated, devoted to the steam generators (SGs). This program, managed cooperatively by Framatome, the SG designer and manufacturer; Electricité de France (EDF), the French electrical utility; and the Commissariat à l'Energie Atomique (CEA), the French Atomic Energy Commission, primarily responsible for nuclear research; was focused on four main objectives:

1. (1) To obtain a better understanding of the physical phenomena existing in these steam generators and leading to SG performance alterations or operating life reductions.

2. (2) To test and validate improved design solutions for the model 51 Framatome steam generator, which was the first one designed under Westinghouse license.

3. (3) To test and validate new Framatome SG designs.

4. (4) To test and validate new, high-performance design tools.

This vast R&D program covers the following theses:

• - SG thermal-hydraulics,

• - SG tube vibration and wear,

• - SG materials (production, corrosion, etc.),

• - Primary and secondary fluid chemistry,

• - SG technology (manufacturing processes, NDT, etc.),

• - SG in-service inspection, and

• - SG maintenance.

These themes are too numerous to be dealt with in a single article. Consequently, the present article will focus on only the first two themes.     

Effect of porosity and hydrostatic pressure on water absorption in a semicrystalline fluoropolymer

This paper discusses the effect of porosity and hydrostatic pressure on diffusion kinetics and equilibrium water uptake in a semicrystalline fluoropolymer. Water sorption experiments at atmospheric pressure and under water pressures up to 250 MPa were carried out during 18 months at 40 °C on reference and porous samples. Porosity of samples was induced due to a cavitation process occurring at the highest triaxiality area of waisted and notched specimens during tensile tests. Water uptake was found to be very sensitive to porosity, showing an increase in samples with a high void fraction. On the other hand, water content decreased with increasing pressure suggesting a compaction of the porous space in which water can be stored. Two models describing this water uptake behaviour were considered. The first is a classical model which assumes that sorption occurs only by diffusion following Fick’s law. Fick’s model was found to be in agreement with the experimental results. A “Langmuir-type” sorption model was also proposed to describe water uptake in porous samples, considering a two-phase water transport mechanism: one portion of the absorbed water diffuses through the polymer matrix and the other portion is stored in voids. This model was implemented in a user subroutine using ABAQUS? software and simulations were confronted to experimental sorption curves showing satisfactory agreements. The potential of the Langmuir-type sorption model resides on its availability to be coupled to a poro-mechanical model, in order to improve the understanding of coupling between the mechanical behaviour and water sorption mechanism in a porous polymer.     

New methods for the determination of hydrogen content of aluminum and its alloys: Part I. Improvements in the vacuum extraction method

The vacuum hot extraction method, first proposed by Ransley for the determination of hydrogen content of aluminum and its alloys, was systematically investigated to check if it could be considered as a reference procedure for the development of other methods directly applicable in routine work. For that, the use of an improved apparatus involving a mass spectrometer as gas detector and specimens intentionally charged with deuterium —a tracer whose properties are similar to those of hydrogen—permits the following conclusions: 1) The method is correct for any alloy, even for all the alloys with a high magnesium or zinc content, 2) The “getter effect” which could lead to inaccurate results does not occur, provided the pumping speed of the transfer pump exceeds the rate of outgassing from the sample, 3) The extraction from the solid phase seems to be complete, since results obtained in this condition are not significantly different from those obtained from melted samples. 4) The time required for an analytical determination (several hours) due essentially to the preliminary operations, cannot be practically reduced by extraction at higher temperature in the liquid state. The Ransley method can thus be considered as a reference method for checking other more practical methods.     

SOLUBILITY AND DIFFUSIVITY OF GASES IN AN ORGANIC SOLUTION OF AMINE

Solubilities and diffusivities of carbon dioxide and nitrous oxide in a mixture of toluene and isopropanol organic solution of cyclohexylamine were measured at 20°C in the range of pressures of solute from 1 to 3 bars. This was performed with an original chromatographic technique taking into account the presence of the product of the reaction.     

Ratchet effect study in Si/SiGe heterostructures in the presence of asymmetrical antidots for different polarizations of microwaves

In this work, we studied the photovoltage response of an antidot lattice to microwave radiation for different antidot parameters. The study was carried out in a Si/SiGe heterostructure by illuminating the antidot lattice with linearly polarized microwaves and recording the polarity of induced photovoltage for different angles of incidence. Our study revealed that with increased antidot density and etching depth, the polarity of induced photovoltage changed when the angle of incidence was rotated 90 degrees. In samples with large antidot density and/or a deeply etched antidot lattice, scattering was dominated by electron interaction with the asymmetrical potential created by semicircular antidots. The strong electron–electron interaction prevailed in other cases. Our study provides insight into the mechanism of interaction between microwaves and electrons in an antidot lattice, which is the key for developing an innovative ratchet-based device. Moreover, we present an original and fundamental example of antidot lattice etching through the use of a two-dimensional electron gas. This system deals with a hole lattice instead of an electron depletion in the antidot lattice region.     

Addition of Synthetic Biomaterials to Deproteinized Bovine Bone Mineral (DBBM) for Bone Augmentation—A Preclinical In Vivo Study

(1) Aim: To investigate the effect of synthetic bone substitutes, α-tricalcium phosphate (α-TCP) or bi-layered biphasic calcium-phosphate (BBCP) combined with deproteinized bovine bone mineral (DBBM), on bone formation. (2) Methods: Thirty critical size defects were randomly treated with the following five different treatment modalities: (1) negative control (NC, empty), (2) DBBM, (3) α-TCP + DBBM (1:1), (4) BBCP 3%HA/97%α-TCP + DBBM (1:1), and (5) BBCP 6%HA/94%α-TCP + DBBM (1:1). The samples, at four weeks post-surgery, were investigated by micro-CT and histological analysis. (3) Results: A similar level of new bone formation was demonstrated in the DBBM with α-TCP bone substitute groups when compared to the negative control by histomorphometry. DBBM alone showed significantly lower new bone area than the negative control (p = 0.0252). In contrast to DBBM, the micro-CT analysis revealed resorption of the α-TCP + DBBM, BBCP 3%HA/97%α-TCP + DBBM and BBCP 6%HA/94%α-TCP + DBBM, as evidenced by a decrease of material density (p = 0.0083, p = 0.0050 and p = 0.0191, respectively), without changing their volume. (4) Conclusions: New bone formation was evident in all defects augmented with biomaterials, proving the osteoconductive properties of the tested material combinations. There was little impact of the HA coating degree on α-TCP in bone augmentation potential and material resorption for four weeks when mixed with DBBM.     

Introduction

Networks and Spatial Economics -