Aurora Kinase A Is Involved in Controlling the Localization of Aquaporin-2 in Renal Principal Cells

The cAMP-dependent aquaporin-2 (AQP2) redistribution from intracellular vesicles into the plasma membrane of renal collecting duct principal cells induces water reabsorption and fine-tunes body water homeostasis. However, the mechanisms controlling the localization of AQP2 are not understood in detail. Using immortalized mouse medullary collecting duct (MCD4) and primary rat inner medullary collecting duct (IMCD) cells as model systems, we here discovered a key regulatory role of Aurora kinase A (AURKA) in the control of AQP2. The AURKA-selective inhibitor Aurora-A inhibitor I and novel derivatives as well as a structurally different inhibitor, Alisertib, prevented the cAMP-induced redistribution of AQP2. Aurora-A inhibitor I led to a depolymerization of actin stress fibers, which serve as tracks for the translocation of AQP2-bearing vesicles to the plasma membrane. The phosphorylation of cofilin-1 (CFL1) inactivates the actin-depolymerizing function of CFL1. Aurora-A inhibitor I decreased the CFL1 phosphorylation, accounting for the removal of the actin stress fibers and the inhibition of the redistribution of AQP2. Surprisingly, Alisertib caused an increase in actin stress fibers and did not affect CFL1 phosphorylation, indicating that AURKA exerts its control over AQP2 through different mechanisms. An involvement of AURKA and CFL1 in the control of the localization of AQP2 was hitherto unknown.     

Extraction of heavy metals from soils using biodegradable chelating agents

Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.     

The effect of cocoa fermentation and weak organic acids on growth and ochratoxin A production by Aspergillus species

The acidic characteristics of cocoa beans have influence on flavor development in chocolate. Cocoa cotyledons are not naturally acidic, the acidity comes from organic acids produced by the fermentative microorganisms which grow during the processing of cocoa. Different concentrations of these metabolites can be produced according to the fermentation practices adopted in the farms, which could affect the growth and ochratoxin A production by fungi. This work presents two independent experiments carried out to investigate the effect of some fermentation practices on ochratoxin A production by Aspergillus carbonarius in cocoa, and the effect of weak organic acids such as acetic, lactic and citric at different pH values on growth and ochratoxin A production by A. carbonarius and Aspergillus niger in culture media. A statistical difference (ρ<0.05) in the ochratoxin A level in the cured cocoa beans was observed in some fermentation practices adopted. The laboratorial studies demonstrate the influence of organic acids on fungal growth and ochratoxin A production, with differences according to the media pH and the organic acid present. Acetic acid was the most inhibitory acid against A. carbonarius and A. niger. From the point of view of food safety, considering the amount of ochratoxin A produced, fermentation practices should be conducted towards the enhancement of acetic acid, although lactic and citric acids also have an important role in lowering the pH to improve the toxicity of acetic acid.     

Adsorption of arsenic from water using activated neutralized red mud

In this paper activated seawater-neutralized red mud, herein referred to as activated Bauxsol (AB), is used as a novel adsorbent for removing inorganic arsenic (As) from water. The adsorption of As onto AB is studied as a function of contact time, particle size, pH, initial As concentration, AB dosage, and temperature. Kinetic data indicate that the process pseudoequilibrates in 3 and 6 h for As(V) (arsenate) and As(III) (arsenite), respectively, and follows a pseudo-first-order rate expression. Within the range tested, the optimal pH for As(V) adsorption is 4.5, and close to 100% removal can be achieved irrespective of the initial As(V) concentration. Desorption of As(V) is greatest at pH 11.6 where a maximum of 40% can be achieved. In contrast, the optimum pH for As(III) removal is 8.5, and the removal efficiency changes with the initial As(III) concentration. The adsorption data fit the Langmuir isotherm and its linearized form well, with thermodynamic data indicating the spontaneous and endothermic nature of the process. The FITEQL (V.4) and PHREEQC (V.2) computer programs are used to predict As(V) adsorption at various pH values (based on diffuse double layer models). The modeling results fit the experimental results very well and indicate that surface complexation modeling is useful in describing the complex AB surface during the adsorption process. This study shows that As(III) needs to be oxidized to As(V) for a favorable removal using AB and that AB can be a very efficient unconventional adsorbent for removing As(V) from water.     

WSA-DC——下一代高浓度高转化率WSA工艺

介绍了托普索公司新开发的WSA-DC工艺,详述其流程、优点、性能、消耗和生产数据.WSA-DC工艺是一个两次冷凝工艺,它结合了WSA工艺与两转两吸工艺的优点,通过对中间冷凝器的设计改进和仔细控制气体中的H2O/SO2比率,可以用ψ(SO2)等于或高于13%的原料气生产w(H2SO4)为99%的硫酸.以1套540t/d硫磺制酸装置为例,对WSA-DC工艺和传统干法两转两吸工艺进行了技术经济比较.     

Peptide Bioconjugates of Electron‐Poor Metallocenes: Synthesis,Characterization, and Anti‐Proliferative Activity

We report the synthesis of metallocene compounds Cp₂M with two different electron‐withdrawing substituents on both cyclopentadienyl rings (hexafluoroacetone (HFA) and chlorobenzoyl ( 1 – 5 ); HFA and COOH ( 6 and 7 ), M=Fe or Ru). The COOH‐containing derivatives were used to synthesize peptide bioconjugates with enkephalin ( 8 and 9 ) and neurotensin ( 10 and 11 ) as well as fluorescein‐labeled neurotensin ( 12 ). All the molecules were fully characterized, including X‐ray structures for 6 and 7 . The physicochemical properties (lipophilicity and electrochemistry) and cytotoxicity on MCF‐7, HT‐29, and PT‐45 cancer cells were evaluated for selected compounds. Electrochemical investigation by cyclic voltammetry revealed that all bis‐substituted metallocenes are up to 300 mV harder to oxidize compared to the monosubstituted 2‐ferrocenylhexafluoropropan‐2‐ol (FcHFA: Δ${E{{{\rm f}\hfill \atop 0\hfill}}}$ =214 mV; disubstituted derivatives: up to Δ${E{{{\rm f}\hfill \atop 0\hfill}}}$ =512 mV; both vs. FcH^0/+). For the bis‐substituted compounds, log P determinations by RP‐HPLC showed increased lipophilicity in comparison to the monosubstituted FcHFA and RcHFA. Cellular uptake was investigated by fluorescence microcopy, and this revealed endosomal entrapment for 12 .     

Gewinnung leichter Kohlenwasserstoffe aus schweren Ölen — Verfahren und Entwicklungen

Manufacture of light hydrocarbons from heavy oils – processes and developments . High quality crude oils are running short and their price continues to increase. At the same time there is a trend towards light petroleum products for use as transportation fuels or petrochemical raw materials. Consequently, the conversion of heavy oils, i.e., particularly distillation residues but also heavy oils from tar sands, is gaining increasing commercial importance. The cracking processes currently used in the refining industry are reviewed. Emphasis is placed on their application to metal-and asphaltene-containing heavy oils. Feed pretreatment by solvent deasphalting is discussed and the manufacture of syncrude from tar sands is considered. New developments for conversion of heavy oils are outlined. The future production of shale oil and of transportation fuels from oil shale is briefly treated.     

Design and Fabrication of Transparent and Gas‐Tight Optical Windows in Low‐Temperature Co‐Fired Ceramics

Low‐temperature co‐fired ceramics (LTCC) enable the fabrication of microfluidic elements such as channels and embedded cavities in electrical devices. Hence, LTCC facilitate the realization of complex and integrated microfluidic devices. Examples can be applied in many areas like reaction chambers for synthesis of chemical compounds. However, for many applications it is necessary to have an optically transparent interface to the surroundings. The integration of optical windows in LTCC opens up a wide field of new and innovative applications such as the observation of chemiluminescent reactions. These chemical reactions emit electromagnetic radiation and thus offer a method for noninvasive detection. Thin glasses (≤500 μm) were bonded by thermocompression onto a LTCC substrate. As the bonding agent, a glass frit paste was used. Borosilicate glasses, fused silica as well as silicon were successfully bonded onto LTCC. To join materials with a large coefficient of thermal expansion mismatch (i.e., fused silica and LTCC), it is necessary to limit the heat input to the bond interface. Therefore, a heating structure was integrated into the LTCC substrate beneath the bond interface. This bonding process provides a gas‐tight optical port with a high bond strength.     

Heat-integrated reactor concepts for catalytic reforming and automotive exhaust purification

Optimal solutions in environmental catalysis require a well-coordinated development of catalysts and of process design. This contribution is devoted to energy integrated design concepts for fuel reforming and for automotive exhaust purification. The examples presented demonstrate the importance of an innovative process design for optimal utilization of existing catalysts and show the potential of future developments.

New concepts for steam reforming through the efficient coupling of the endothermic reforming reaction with an exothermic combustion reaction are discussed in the first part. These concepts have been implemented for methanol steam reforming in a counter-current reactor with distributed side feed of burner gas and for methane steam reforming in a modular reactor with a co-current reaction section for the endothermic and the combustion reaction and attached counter-current heat exchangers. Both applications employ the so-called folded sheet reactor design, which ensures an excellent heat transfer between the reforming and combustion channels and efficient heat recovery.

A similar design solution is introduced for the apparently different case of automotive exhaust purification. The proposed concept aims at decoupling exhaust after-treatment from engine control. Its main component is a counter-current heat exchanger with integrated purification stages for HC-oxidation, NO_X storage and reduction and soot filtering. A small catalytic burner at the hot end of the heat exchanger provides both heat and oxidizing or reducing agents on demand. A new soot filter design allows for safe soot filter regeneration.     

The Role of Farm Advisors in Multifunctional Landscapes: A Comparative Study of Three Danish Areas, 1995 and 2008

This study investigates the influence of farm advisors on farmers’ decisions regarding ‘Multifunctional landscape commons’, a concept covering environmental and landscape values that benefit the public but which depend on farmers’ management practices. The influence of advisors is analysed by combining data about the source of advice with evidence of land use and landscape changes and participation in subsidy schemes. The study compares three agricultural areas in Denmark. Structured interviews were carried out with all farmers possessing more than 2 ha land in 1995–6 and in 2008. Vertical, production and business-oriented advisory services predominate, together with legal and organisational spatial competence networks. A new group of hobby farmers and pensioned farmers tend not to be included in traditional advisory networks, leaving them to carry out landscape changes and multifunctional landscape commons without professional guidance and consultancy. This means the horizontal coordination among farmers, that is, the territorial competences, decrease.