Multiplex Real-time PCR for the Simultaneous Detection of Salmonella spp. and Listeria monocytogenes in Food Samples

In this study, we have developed a rapid method for the simultaneous detection of Listeria monocytogenes and Salmonella spp. in foods, combining culture enrichment and a multiplex real-time polymerase chain reaction (PCR). The assay used two pre-existing primer-probe sets, labelled with different reporter dyes to enable the direct distinction of the original contaminating agent. Amplification efficiency and inclusivity/exclusivity of the combined assay was successfully assessed. The overall process included the culture enrichment based on the ISO standard, consisting of 24 h incubation in appropriate media (Half Fraser Broth for Listeria and buffered peptone water (BPW) for Salmonella), followed by a single DNA extraction of mixed enrichment aliquots, and real-time PCR detection of the hly and bipA genes of L. monocytogenes and Salmonella spp., respectively. An internal amplification control, co-amplified during the PCR run, was included in the assay to verify the results. The tool was evaluated with a variety of artificially inoculated samples of fresh products and ready to eat and cooked dishes, allowing the identification of the target pathogens down to 5 CFU/25 g of food sample. Moreover, the analysis saved a considerable amount of time compared to the ISO standard, being performed in less than 2 working days. Specificity, sensitivity and accuracy were satisfactorily tested by comparison to the standard methods ISO 11290-2:1998 and ISO 6579:2002, suggesting that the tool has a great potential as a reliable alternative for food safety assurance providing rapid detection of both pathogens in food samples.     

BEM analysis of damage progress in 0/90 laminates

The massive use of composites in primary structures of modern commercial aeroplanes is leading to the need for profound knowledge of the mechanisms of damage and failure of heterogeneous materials of this type. This knowledge requires a very fine evaluation of the stress state, which in turn is needed to calculate the parameters of fracture mechanics used to evaluate the integrity or damage tolerance of a particular component. In this paper, the initiation and growth of the damage in a typical [0/90]_S laminate is investigated. Using a BEM code allowing contact between the lips of interfacial cracks appearing in the damaged configuration and based on a former generalized plane strain formulation of the problem developed by the authors, the energy release rate (ERR) is calculated for different configurations corresponding to the different intermediate states that may occur in the process of damage generation. The numerical results obtained clarify some aspects of the progression of the damage and open up the possibility, using comparison with experimental results, of understanding, and consequently improving, the performance of composite materials.     

The Irritant Effects of Pharmaceutically Applied Surfactants

Dermal or transdermal medication may lead to irritant contact dermatitis. However, little information is available on the irritant effect of surfactants which are applied in topical formulations. Our aim was to examine the irritant effect of the most frequent compounds in topical products. A murine model was applied. The following compounds were examined: sodium lauryl sulphate (SLS), polyethoxylated (40EO) hydrogenated castor oil and sucrose laurate. SLS led to severe erythema, increase in transepidermal water loss (TEWL) and induced necrosis and accumulation of neutrophylic granulocytes and lymphocytes. Exposure to sucrose laurate resulted in an elevation of TEWL, but histology did not reveal impairment of the skin structure. Application of polyethoxylated (40EO) hydrogenated castor oil was not accompanied by tissue damage. Special attention should be paid to the irritant effect of SLS. Polyethoxylated (40EO) hydrogenated castor oil seems to be a non-irritant agent and sucrose laurate is also a promising candidate for application in topical preparations.     

Electrical and rheological percolation in poly(vinylidene fluoride)/multi‐walled carbon nanotube nanocomposites

Nanocomposites of poly(vinylidene fluoride) (PVDF) and multi‐walled carbon nanotubes (MWCNTs) were prepared through melt blending in a batch mixer (torque rheometer equipped with a mixing chamber). The morphology, rheological behavior and electrical conductivity were investigated through transmission electron microscopy, dynamic oscillatory rheometry and the two‐probe method. The nanocomposite with 0.5 wt% MWCNT content presented a uniform dispersion through the PVDF matrix, whereas that with 1 wt% started to present a percolated network. For the nanocomposites with 2 and 5 wt% MWCNTs the formation of this nanotube network was clearly evident. The electrical percolation threshold at room temperature found for this system was about 1.2 wt% MWCNTs. The rheological percolation threshold fitted from viscosity was about 1 wt%, while the threshold fitted from storage modulus was 0.9 wt%. Thus fewer nanotubes are needed to approach the rheological percolation threshold than the electrical percolation threshold. Copyright © 2010 Society of Chemical Industry     

Transport of Dissolved Si from Soil to River: A Conceptual Mechanistic Model

This paper reviews the processes which determine the concentrations of dissolved silicon (DSi) in soil water and proposes a conceptual mechanistic model for understanding the transport of Si through soils to rivers. The net DSi present in natural waters originates from the dissolution of mineral and amorphous Si sources in the soil, as well as precipitation processes. Important controlling factors are soil composition (mineralogy and saturated porosity) and soil water chemistry (pH, concentrations of organic acids, CO₂ and electrolytes). Together with production, polymerization and adsorption equations they constitute a mechanistic framework determining DSi concentrations. We discuss how key controls differ across soil horizons and how this can influence the DSi transport. A typical podzol soil profile in a temperate climate is used as an example, but the proposed model is transferrable to other soil types. Additionally, the impact of external forcing factors such as seasonal climatic variations and land use is evaluated. This blueprint for an integrated model is a first step to mechanistic modelling of Si transport processes in soils. Future implementation with numerical methods should validate the model with field measurements.     

Assessing performance of skim milk ultrafiltration by using technical parameters

In the present study a mathematical model has been applied to interpret the permeate flux decay that occurs during the process of concentrating skim milk by ultrafiltration using a commercial membrane module. The effects on membrane fouling of two operational variables, temperature and transmembrane pressure, have been studied using technical parameters. An energy analysis has demonstrated that the major energy consumption takes place in the thermal process and not in the mechanical pumping of the fluid. In addition, higher increments in permeate volume can be achieved by increasing transmembrane pressure, not temperature. The mathematical analysis presented here permits the evaluation of optimum values of the engineering parameters necessary to design and operate skim milk ultrafiltration units.     

Spatial diastereomer patterns of hexabromocyclododecane (HBCD) in a Norwegian fjord

Hexabromocyclododecane (HBCD) is the third most used brominated flame retardant globally, and has been found widely distributed in the environment. The present study reports concentrations and spatial patterns of α, β and γ-HBCD in a contaminated Norwegian fjord. Intertidal surface sediment and selected species from the marine food web were sampled at five locations in increasing distance from a known point source of HBCD. All sediment and biota samples were analyzed for the three HBCD diastereomers by liquid chromatography and mass spectrometry (LC/MS). The results demonstrated a HBCD gradient with decreasing concentrations at increasing distance from the point source in sediment and sedentary species, but less so in the species with large feeding ranges. Mean concentrations of ΣHBCD at the closest/most remote locations relative to the point source were 9000/300 ng g^− 1 TOC in sediment and 150/90 ng g^− 1 lw in the species with largest feeding range (great black-backed gull). The HBCD diastereomer patterns were similar for each of the matrices (sediment, organisms) independent of distance from the source, indicating no difference in environmental partitioning between the diastereomers. However, the concentration ratio of diastereomers in each matrix ranged from 3:1:10 (α:β:γ) in the sediments to 55:1 (α:γ) in the highest trophic level species, suggesting diastereomer-specific bioaccumulation in the organisms.     

Structural elements of coordination mechanisms in collaborative planning processes and their assessment through maturity models: Application to a ceramic tile company

Maturity is defined as a measure to evaluate the capabilities of an organization in regards to a certain discipline. The Collaborative Planning Process is a very complex process and Coordination mechanisms are especially relevant in this field to align the plans of the supply chain members. The objective of this paper is to develop a maturity model and a methodology to perform assessment for the Structural Elements of Coordination Mechanisms in the Collaborative Planning Process. Structural elements are specified in order to characterize coordination mechanisms in a collaborative planning context and they have been defined as key areas to be assessed by the maturity model. The identified structural elements are: number of decision-makers, collaboration level, interdependence relationships nature, interdependence relationships type, number of coordination mechanisms, information exchanged, information processing, decision sequence characteristics and stopping criteria. Structural elements are assessed using the scheme of five levels: Initial, Repeatable, Defined, Managed and Optimized. This proposal has been applied to a ceramic tile company and the results are also reported.     

Applicability of time-of-flight-based ground and multispectral aerial imaging for grapevine canopy vigour monitoring under direct root-zone deficit irrigation

ABSTRACT

This study investigates the applicability of ground-based 3D time-of-flight (ToF) imaging and small unmanned aerial system (UAS) integrated multispectral imaging as a rapid grapevine canopy vigour mapping tool for decision support during crop production management. Direct root-zone deficit irrigation was applied to grapevines with continuous and pulse irrigation techniques at 15%, 30%, and 60% rates as that of standard irrigation rate (100%) established by the grower in a commercial production. The control block was irrigated continuously at 100% standard irrigation rate. Field plots were imaged using ground platform integrated with 3D ToF imaging sensor and small UAS-integrated multispectral camera at 128 and 65 days before the harvest to estimate the canopy vigour variability associated with irrigation treatments. Customized as well as standard methods (convex hull and voxel grid) were utilized to extract canopy attributes (e.g. volume) from the 3D ToF imaging sensor data. The multispectral images were processed to extract normalized and green normalized difference vegetation index images. Resulting data were used to estimate canopy area ratio i.e. the ratio between the grapevine canopy area with respect to the total area in selected region of interest. A significant correlation (r = 0.34) between canopy volume estimated by customized algorithm and aerial canopy area ratio was observed. Custom canopy volume estimates were also highly correlated (r = 0.79) with voxel grid derived canopy volume data. Overall, 60% continuous direct root zone deficit irrigation appeared to produce canopy volume/vigour comparable with those under control treatment. Results also suggest that grower can utilize either or both (ground and aerial) grapevine canopy mapping techniques for effective management.