Accurate buckling load calculations of a thick orthotropic sandwich panel

This paper is concerned with the buckling of thick sandwich panels with orthotropic elastic face sheets bonded to a linear elastic orthotropic core. When such panels are analyzed for axial load carrying capacity, it is now commonplace to adopt the finite element method to carry out computations. The accuracy of the numerical results will depend not only on roundoff and algorithmic errors, but additionally on the approximations made in computing the incremental (second order) work associated in computing the change of configuration from the unbuckled to the buckled state. Here we show that, particularly for orthotropic thick sandwich structures, large errors can be incurred in computing buckling loads with available commercial software, unless the proper work conjugate measures of stress and strain with their stress-dependent tangential moduli are used in the buckling formulation.     

A rapid method for simultaneous determination of triterpenoid saponins in Pulsatilla turczaninovii using microwave-assisted extraction and high performance liquid chromatography–tandem mass spectrometry

In the present study, a microwave-assisted extraction (MAE) and high performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS) method was developed for the simultaneous determination of seven triterpenoid saponins in Pulsatilla turczaninovii. Operational conditions of MAE were optimized using a central composite design. Multiple-reaction monitoring was employed for quantification while switching the electrospray ion source polarity between positive and negative modes. Full validation of the method was carried out (linearity, precision, accuracy, limit of detection and limit of quantification). The results indicated that the method was rapid, specific and reliable. The developed method was successfully applied to determine the investigated compounds in nine batches of P. turczaninovii. These samples were collected in different seasons from the Liaoning province and varied greatly. The total triterpenoid saponins content was the highest in April, the seedling stage, and decreased from May to August. The contents of total triterpenoid saponins decreased significantly after the blooming period.     

Functionalized silicon quantum dots by N-vinylcarbazole: synthesis and spectroscopic properties

Silicon quantum dots (Si QDs) attract increasing interest nowadays due to their excellent optical and electronic properties. However, only a few optoelectronic organic molecules were reported as ligands of colloidal Si QDs. In this report, N-vinylcarbazole - a material widely used in the optoelectronics industry - was used for the modification of Si QDs as ligands. This hybrid nanomaterial exhibits different spectroscopic properties from either free ligands or Si QDs alone. Possible mechanisms were discussed. This type of new functional Si QDs may find application potentials in bioimaging, photovoltaic, or optoelectronic devices.     

DMA thermal analysis of different parts of potato tuber

Dynamic mechanical analysis (DMA) was applied to three potato tissues (‘cortex’, ‘pith’, and ‘side’ surface) of two cultivars (more waxy ‘Nicola’ and more mealy ‘Saturna’) in temperature scans in the range 30–90 °C and constant air humidity of 90%. The obtained scans indicate peaks in both storage and loss module of elasticity (SM and LM, respectively) at temperatures higher than 70 °C – so called ‘starch’ peak (SP) – as was observed previously. The peak value increase with increasing potato dry matter (DM) content, below DM content approximately 14% no SP is observed (‘Nicola pith’). Slope analysis of the basic parameters: SM, LM, and loss tangent (LT) was performed and further characteristic points on the temperature plots were found: (i) in temperature range A (30–40 °C) maximum of SM and LM and minimum of LT, (ii) in temperature range B (40–50 °C) minimum of SM and LM slopes corresponding to point of inflection on SM-T and LM-T plots, (iii) at about 50 °C, big peak in LT in side tissue only, (iv) at about 70 °C just prior the ‘starch’ peak, big peak in LT that is more marked in ‘pith’; this peak denoted as ‘I’ influenced the ‘starch’ peak ‘II’. It was found that both cultivar and part of the tuber influences the DMA temperature plots.     

空气潜孔锤钻井工艺在煤层气井中的应用

本文主要介绍了空气潜孔锤在煤层气钻井中工作原理、钻具组合、主要技术参数的计算选择和钻进中的注意事项,并尝试采用三牙轮钻头进行冲击回转钻进第四系,提高整体钻进效率。     

Hydrogen production by steam reforming of liquefied natural gas (LNG) over mesoporous nickel–alumina xerogel catalysts prepared by a single-step carbon-templating sol–gel method

A series of mesoporous nickel–alumina xerogel catalysts (denoted as CNAX) were prepared by a single-step carbon-templating sol–gel method using different amount of carbon template (X), and they were applied to the hydrogen production by steam reforming of liquefied natural gas (LNG). Textural properties of CNAX catalysts were improved with increasing the amount of carbon template. CNAX catalysts exhibited diffraction peaks corresponding to nickel aluminate phase, while CNA18 and CNA24 catalysts showed additional bulk nickel oxide phase. From TPR measurements, it was revealed that the interaction between nickel species and alumina in the CNAX catalysts became weakened with increasing the amount of carbon template. Crystallite size of metallic nickel in the reduced CNAX catalysts showed a volcano-shaped trend with respect to the amount of carbon template. In the steam reforming of LNG, CNAX (X = 0, 6, 12, and 18) catalysts exhibited a stable catalytic performance during the reaction, while CNA24 catalyst showed a significant catalyst deactivation. Crystallite size of metallic nickel served as an important factor determining the catalytic performance in the steam reforming of LNG. Initial LNG conversion and initial hydrogen yield increased with decreasing crystallite size of metallic nickel of the catalysts. Among the catalysts tested, CNA12 catalyst with the smallest crystallite size of metallic nickel showed the best catalytic performance.     

Optimization of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine hybrid system for distributed power generation

In a previous study, a new hybrid system of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine was developed, where the HCCI engine replaces the catalytic burner and produces additional power by using the left-over heating values from the fuel cell stack. In the present study, to reduce the additional cost and footprint of the engine system in a hybrid configuration, the possibility of engine downsizing is investigated by using two strategies, i.e. the use of a turbocharger and the use of high geometric compression ratio for the engine design, both of which are to increase the density of the intake charge and thus the volumetric efficiency of the engine. Combining these two strategies, we suggest a new engine design with ∼60% of displacement volume of the original engine. In addition, operating strategies are developed to run the new hybrid system under part load conditions. It is successfully demonstrated that the system can operate down to 65% of the power level of the design point, while the system efficiency remains almost unchanged near 63%.     

Determining adulteration of canned products using SNIF-NMR and IRMS: detection of undeclared addition of synthetic acetic acid

Possible adulteration of canned products containing spirit vinegar pickle by adding synthetic acetic acid is a significant problem of the food industry. Isotope analyses, which determine botanical origin of acetic acid and also can detect synthetic acid, were applied to detect undeclared addition of synthetic acetic acid to canned products. The aim of the study was to improve the extraction technique for the SNIF-NMR (²H/¹H; site-specific natural isotopic fractionation-nuclear magnetic resonance) and IRMS (¹³C/¹²C; isotope ratio mass spectrometry) isotope methods and for an atypical matrix and to determine isotope ratios in canned vegetables pickle to prove their adulteration or authenticity. The following set of canned products was analysed: pickled cucumbers (n = 16) and one vinegar pickle purchased in the Czech market and six model (cucumber) pickles. The determined ratios of ²H/¹H and ¹³C/¹²C for the pickled cucumbers proved to be authentic ranged from 89.4 to 107.0 ppm and from ?28.7 to ?15.6 ‰, respectively; for the synthetic acetic acids diluted with water they ranged from 114.2 to 129.0 ppm and from ?44.9 to ?33.4 ‰, respectively. Isotope analyses were confirmed as a reliable tool for assessing authenticity of canned products. The method enables detection of synthetic acetic acid addition into vinegars and canned vegetables containing vinegar pickle up from 20 % (of total acidity).     

Pretreatment of piggery digestate wastewater by ferric-carbon micro-electrolysis under alkalescence condition

Due to the low COD/TN ratio, piggery digestate wastewater is non-biodegradable and pathogenic; its advanced treatment is becoming a wide-spread environmental concern. In this study, the process of Fe-C micro-electrolysis was applied to pretreat piggery digestate wastewater. Fe-C micro-electrolysis was confirmed effectively to enhance biodegradability of the piggery digestate wastewater. Response surface methodology (RSM) was employed to study the interactions between factors and optimize operating parameters. The optimum conditions for Fe-C micro-electrolysis were found to be 150 g/L of dosages of Fe-C particles, 6 L/h of aeration rate and 9 h of hydraulic retention time at pH 7.6, respectively. Under these conditions, the obtained chemical oxygen demand (COD) removal efficiency was 52.62%, and the ratio of BOD/COD increased from 0.13 to 0.285, which showed improvement of biochemical property. Furthermore, SEM analysis indicated the surface configuration of Fe-C particles. More important, this process could effectively pretreat the piggery digestate wastewater and avoid the generation of secondary pollution.