Interface microstructure and reaction in Gr/Al metal matrix composites

The interface structure in Gr/Al composites fabricated with liquid metal infiltration has been studied using transmission electron microscopy (TEM). Morphologies of interfacial reaction product, aluminium carbide Al₄C₃, formed at different manufacturing parameters were compared and, the growth mechanism of the carbide was studied by means of high resolution electron microscopy (HREM). It has been shown that the morphology of the carbide is intimately related to the processing parameters with which the composites were produced. There are two kinds of interfaces between the carbide and the aluminium matrix. They have different growth mechanisms and relative growth rates under different growth driving forces. Several crystal orientation relationships between the carbide and the aluminium matrix have been observed.     

多功能滚齿机的数字控制系统

本文叙述了以ＳＴＤＰＣ／ＸＴ（或ＰＣ／ＡＴ）机为主要核心构成的滚齿机数字控制系统的结构，软件设计和特点，系统采用混合语言编程，极大地提高了软件设计的灵活性与快速性，也分析了ＣＮＣ系统的加工过程，提出了加工中的软件预处理控制方法，并给出了轴伺服控制的并行算法分析与实现。     

GaP：（N）的背景光谱和发光尖峰

获得高分辨ＧａＰ（Ｎ）光致发光光谱，观察到等电子陷陆束缚激子发光中ＬＯ和ｌｏｃ多声子发射，其强度分布答合泊松分布。将声子伴带区分为直接光跃迁和间接光跃迁，并进行了相应讨论，还观察到局域声子效应－－光谱相似定律和相当显著的背景光谱。     

Nd：碲酸盐玻璃的光谱和激光性质

对比了各种激光玻璃的光谱性质，指出碲酸盐玻璃是一咱理想的激光介质，并资产在室温下实现了钛宝石激光器泵浦了Ｎｄ：碲酸盐块体玻璃的激光发射，激光阈值４．２０ｍＪ，斜率效率１４．７％。     

WQ—10型煤气平焰烧嘴的半工业性试验研究

对ＷＱ－１０型煤气平焰烧嘴进行半工业性试验，得到了该烧嘴较长时间运行下的一些性能。结果表明，该烧嘴平火焰稳定，炉顶温度分布均匀，燃烧烟气中ＣＯ、ＮＯ含量达到了ＹＢ／Ｔ０６２－９４标准的要求。     

钒钛磁铁精矿的烧结特性及强化措施

阐述了钒钛磁铁精矿的矿石特点，烧结特性及其与烧结矿质量之间的关系，并提出了强化烧结的措施。     

Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networks

By using the technology of the sequential interpenetrating polymer network, a series of novel damping materials based on a polydimethylsiloxane (PDMS)/polyacrylate (PAC) matrix with polymethacrylate (PMAC) were synthesized. They have a controllable broad transition peak spanning the temperature range of 150–220°C and the medial value of loss factor with maximum of 0.35–0.60. Dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) were applied to analyze and characterize the transition behavior and the microphase structure of the materials. It was found that the size and height of a transition peak at both the low‐ and the high‐temperature zones change as a function not only of the concentration of PMAC and PDMS but also of the kind of PMAC; simultaneously, the low‐ temperature behavior was also governed by the crystallization of PDMS. The content of the crosslinking agent exerts a significant influence on the configuration of the curves of the transition peaks. AFM shows a characteristic phase morphology of double‐phase continuity containing a transition layer and domain less than 1 μm, indicating that the interwoven multilayer networks are the key to incorporation of the immiscible components and form a broad damping functional region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 545–551, 2002     

谈节水灌溉的推广应用

全面推行节水灌溉势在必行，结合江西省上饶地区节水灌溉的推广工作，总结经验，提出了相应的对策和建议。