Electrochemical studies of octadecanethiol and octanethiol films on variable surface area mercury sessile drops

Octadecanethiol (ODT) and octanethiol (OT) films at the mercury-electrolyte interface are examined using cyclic voltammetry and differential capacitance measurements at a single frequency. A mercury flow-system is used to alter the volume, and therefore, the surface area and surface pressure of the mercury electrode. Manipulation of the mercury electrode's volume enables the introduction and removal of defects in the insulating thiol films. OT and ODT film behavior are contrasted under conditions of expansion and contraction. ODT forms extremely impermeable layers that allow 1000 time less redox probe current than seen on uncoated drops. Expansion of the mercury electrode to increase the electrode surface area produces defects and pinholes in the thiol film. These defects are almost completely removed when the drop is compressed back to its initial surface area. OT also forms insulating films on mercury sessile drops, however these films contain more defects than ODT films. While expansion of an OT-coated mercury drop increases redox probe current, recompression of the drop does not return the film to its initial condition. Pinholes and defects in the OT and ODT films can also be produced by cycling to negative potentials, which produce abrupt stripping peaks.     

Eucalyptol is an Attractant of the Redbay Ambrosia Beetle,Xyleborus Glabratus

The redbay ambrosia beetle, Xyleborus glabratus, is an invasive wood-boring beetle that has become established in the southeastern United States. The beetle transmits the causal pathogen of lethal laurel wilt to susceptible host trees, which include redbay, an important forest community species, and avocado, a valuable food crop. By examining odors of redbay wood, we developed an artificial lure that captured X. glabratus in redbay forests. Eucalyptol was a critical component of the blend for beetle attraction, and eucalyptol alone in large quantities attracted X. glabratus. Furthermore, eucalyptol stimulated boring by X. glabratus into paper arenas. The results suggest that eucalyptol contributes to host selection behavior of X. glabratus and may be useful for management of this pathogen vector.     

Indene epoxidation over immobilized methyltrioxorhenium on MCM-41 silica,fumed silica and aluminosilicate materials

The presented report focuses on the testing of heterogenized methyltrioxorhenium (MTO) in indene epoxidation. A range of mesoporous materials with different SiO₂/Al₂O₃ ratios, namely aluminosilicates type Siral and MCM-41 silica and fumed silica, were used as supports for immobilization of MTO. The tested support materials and prepared catalytic systems exhibited high surface area, well-defined regular structure and narrow pore size distribution of mesopores and therefore represent good quality catalysts for various reactions. The immobilized MTO on various supports was tested for the preparation of 1,2-epoxyindane using two forms of hydrogen peroxide as oxidation agents, namely aqueous solution of hydrogen peroxide and its anhydrous form, urea-hydrogen peroxide. The prepared catalysts were successfully used for the preparation of 1,2-epoxyindane with achieved 100 % selectivities to the desired product at high conversions of indene.     

The effect of alumina particulate morphology on the properties of reinforced poly(propylene) and poly(ethylene-co-vinyl acetate) composites

The effect of alumina particulates on a thermoplastic matrix is investigated, in particular the effect altering the alumina particle size and morphology has on the mechanical properties. Different grades of alumina are used and two thermoplastic matrices; namely poly(propylene) and poly(ethylene-co-vinyl acetate). Investigations showed that optimum properties were achieved with the alumina of smallest particle size and lowest aspect ratio. Preliminary work has also been performed on the use of silane coupling agents and they have proved effective in increasing the tensile properties of the composites.     

Firefly luciferase produces hydrogen peroxide as a coproduct in dehydroluciferyl adenylate formation

Firefly luciferase catalyzes the synthesis of H2O2 from the same substrates as the bioluminescence reaction: ATP and luciferin (D-LH2). About 80% of the enzyme-bound intermediate D-luciferyl adenylate (D-LH2-AMP) is oxidized into oxyluciferin, and a photon is emitted during this reaction. The enzyme pathway responsible for the generation of H2O2 is a side reaction in which D-LH2-AMP is oxidized into dehydroluciferyl adenylate (L-AMP). Like the bioluminescence reaction, the luciferase-catalyzed synthesis of H2O2 and L-AMP is a stereospecific process, involving only the natural D enantiomer. However, the intramolecular electron transfer postulated as essential to the light emission process is not involved in this side reaction.     

Flow patterns and velocity fields in two-dimensional thin slice panel with flow-corrective insert

An experimental two-dimensional (2-D) thin slice panel for studying flow patterns of fine silica sand was designed and manufactured. As supplier of sand was not known at that time, flow properties of the silica sand were assessed without shear tests. A preliminary design of plane-flow hopper of the experimental 2-D panel was assumed to be close to the mass flow conditions. Sand was circulated in the experimental panel to study the steady state flow. Tests of flow patterns suggested typical funnel-flow patterns with stagnant zones in the hopper and in the vertical part of the panel. Stagnant zones near the bottom of the hopper indicated insufficient width of the hopper outlet. Shear tests for estimation of flow properties of silica sand were carried out additionally and two methods of how to transform the funnel flow of sand to the mass flow were followed up; (a) existing 2-D panel was retrofitted with flow-corrective element, and (b) the width of outlet in existing experimental panel was widen into the size, calculated according to mass flow conditions. Both modifications were proven to be successful and the last-in first-out funnel flow was transformed into first-in first-out mass flow of sand. Velocities of individual tracer particles were measured during mass flow and velocity field was evaluated. Velocity profile of particles in the vicinity of flow-corrective insert was studied in detail.     

Extension of the lean limit through hydrogen enrichment of a LFG-fueled spark-ignition engine and emissions reduction

In this experimental investigation the affect of hydrogen addition to a landfill gas-fueled naturally-aspirated spark-ignition engine was explored. Hydrogen concentrations of 0%, 30%, 40%, and 50% by volume were added to simulated landfill gas (60% CH₄ and 40% CO₂). Efficiency, coefficient of variance of indicated mean effective pressure, and CO emissions were measured from near stoichiometric mixtures up to the lean operating limit. Engine-out NOx emissions were compared to predicted future best available control technology targets for NOx emissions in landfill gas-to-energy projects. From this study, it was determined that with 40% hydrogen by volume untreated exhaust NOx emissions can meet the 0.22 g/kWh NOx target while retaining 95% of baseline power and low CO emissions.     

Comparison of microstructural properties and Charpy impact behaviour between different plates of the Eurofer97 steel and effect of isothermal ageing

The microstructure and fracture properties of the Eurofer97 steel plates of thickness 14 mm and 25 mm were investigated in as-received state and in state after long-term thermal ageing (550 °C/5000 h). Detailed microstructure studies were carried out by means of optical light, electron and quantitative electron microscopy. Mechanical properties were evaluated by means of Charpy impact testing and hardness testing and fracture surfaces were fractographically analysed in macro and microscales. The microstructure of the Eurofer97 consisted of tempered martensite with M₂₃C₆ and MX precipitates. Microstructure of 14 mm plate was more homogenous and fine grained than 25 mm plate. Due to different microstructure the t_DBTT of thicker plate was on +10 °C higher than for 14 mm plate for which reached −60 °C. Slight microstructural changes on the level of subgrain consisting of their partial recrystallization and slight carbide coarsening were observed after applied ageing. The isothermal ageing caused evident shift in t_DBTT about +5 °C, which was most likely caused by recrystallization of subgrains.     

The Scent of a Partner: Ambrosia Beetles Are Attracted to Volatiles from Their Fungal Symbionts

Invasive fungus-growing ambrosia beetles are an emerging threat to forest ecosystems and fruit industries, but management tools are lacking. Here we explored the potential of beetle symbionts–ambrosia fungi–as a source of attractants. Our focus was the redbay ambrosia beetle, Xyleborus glabratus, and its symbiotic fungus, Raffaelea lauricola, which are devastating lauraceous hosts in the southeastern United States. We also tested three additional co-occurring beetle species and their symbionts. Each beetle species was consistently attracted to the odors of its symbiotic fungal species, occasionally also to symbionts of other species, but never to non-symbiotic Trichoderma. We further confirmed attraction to ethanol (positive control) in some species. Thus, ambrosia fungi produce volatiles attractive to their vector beetles, which may have potential as novel lures for ambrosia beetle management.     

Thermoelectric Power Generation Utilizing the Waste Heat from a Biomass Boiler

The objective of the presented work is to test the possibility of using thermoelectric power to convert flue gas waste heat from a small-scale domestic pellet boiler, and to assess the influence of a thermoelectric generator on its function. A prototype of the generator, able to be connected to an existing device, was designed, constructed, and tested. The performance of the generator as well as the impact of the generator on the operation of the boiler was investigated under various operating conditions. The boiler gained auxiliary power and could become a combined heat and power unit allowing self-sufficient operation. The created unit represents an independent source of electricity with effective use of fuel.