Identification and evaluation of uncertainties and errors in dynamic models of casted machine tool components

When calculating the dynamic properties of machine tools by means of the finite-element-analysis, highly correlated component models are needed for the derivation of an accurate model of the assembled machine tool structure. For casted machine tool components this cannot always be ensured due to the significant geometric and material uncertainties inherent in the casting process. In this paper, a stepwise modelling approach for casted machine tool components is proposed that allows the derivation of highly correlated models in a defined frequency range. Based on the assumption of superposition the uncertainties and errors involved in the modelling process are identified and evaluated by means of strain energy considerations. By applying this approach to a casted machine tool column, the initial frequency deviations for the considered first 15 structural modes of up to 15 % from the measured values could be reduced below 3 %. Also deeper insight was gained about the influence of the considered uncertainties and errors on the model correlation, as the deviations could be assigned to their sources.     

Storage technologies for wind power in the Columbia River Gorge

The transition from traditional energy sources to renewable has gained popularity and acceptance in recent years. This has been driven mainly by the current level of pollution, global warming, decommission of old nuclear power plants and the increasing cost of conventional energy sources. Nevertheless, one of the many steps to overcome is the seasonality or intermittency of renewable energy sources such as wind power. In recent years, new technologies have come up to address this problem, so the energy can be stored for future purposes. This paper analyses these energy storage alternatives for a specific case in the Columbia River Gorge for wind power. A hierarchical decision model is developed with criteria including political, social, environmental, technical and economical. The main conclusions highlight that the economical and technical criteria are among the most important ones for decision-makers.     

A New Stable Splitting for the Isentropic Euler Equations

In this work, we propose a new way of splitting the flux function of the isentropic compressible Euler equations at low Mach number into stiff and non-stiff parts. Following the IMEX methodology, the latter ones are treated explicitly, while the first ones are treated implicitly. The splitting is based on the incompressible limit solution, which we call reference solution. An analysis concerning the asymptotic consistency and numerical results demonstrate the advantages of this splitting.     

Experiments and Simulations on the Cleaning of a Swellable Soil in Plane Channel Flow

ABSTRACT

The cleaning behavior of a soil with physical properties that depend on the wetting time is studied experimentally via the local phosphorescence detection method and simulated numerically in fully developed plane channel flow for Reynolds numbers up to 30,000. A computationally inexpensive general cleaning model is proposed, adopting an existing removal model and coupling it to the turbulent flow field. The influence of the soil on the flow is neglected and the transient behavior of the soil during cleaning is modeled in the form of a transient Dirichlet boundary condition. This approach is innovative for computational fluid dynamics of this phenomenon. The way of determining the model parameters from the experiment is described. The comparison of the simulation results with experimental data reveals very good suitability of the model in the case of a starch soil. A similar good agreement is found for data for a model protein foulant in tube flow from the literature.     

Handedness and azimuthal energy flow of optical vortex beams

Abstract

The propagation of optical vortex beams obstructed by a knife edge is investigated. The intensity profile shows a characteristic rotation around the beam axis which can be used to determine the absolute handedness of the vortex. Evolution of the intensity profile directly visualizes the rotation of the beam's local Poynting vector.     

Characterization of Chemically and Thermally Treated Oil‐in‐Water Heteroaggregates and Comparison to Conventional Emulsions

Heteroaggregated oil‐in‐water (O/W) emulsions formed by targeted combination of oppositely charged emulsion droplets were proposed to be used for the modulation of physical properties of food systems, ideally achieving the formation of a particulate 3‐dimensional network at comparably low‐fat content. In this study, rheological properties of Quillaja saponins (QS), sugar beet pectin (SBP), and whey protein isolate (WPI) stabilized conventional and heteroaggregated O/W emulsions at oil contents of 10% to 60% (w/w) were investigated. Selected systems having an oil content of 30% (w/w) and different particle sizes (d₄₃ ≤ 1.1 or ≥16.7 μm) were additionally subjected to chemical (genipin or glutaraldehyde) and thermal treatments, aiming to increase network stability. Subsequently, their rheological properties and stability were assessed. Yield stresses (τ₀) of both conventional and heteroaggregated O/W emulsions were found to depend on emulsifier type, oil content, and initial droplet size. For conventional emulsions, high yield stresses were only observed for SBP‐based emulsions (τ₀,_SBP approximately 157 Pa). Highest yield stresses of heteroaggregates were observed when using small droplets stabilized by SBP/WPI (approximately 15.4 Pa), being higher than those of QS/WPI (approximately 1.6 Pa). Subsequent treatments led to significant alterations in rheological properties for SBP/WPI systems, with yield stresses increasing 29‐fold (glutaraldehyde) and 2‐fold (thermal treatment) compared to untreated heteroaggregates, thereby surpassing yield stresses of similarly treated conventional SBP emulsions. Genipin‐driven treatments proved to be ineffective. Results should be of interest to food manufacturers wishing to design viscoelastic food emulsion based systems at lower oil droplet contents.     

Anisotropic deformation for local shape control

Computational Visual Media - We present a novel approach to mesh deformation that enables simple context sensitive manipulation of 3D geometry. The method is based on locally anisotropic...