Quantification of aroma vapours sorbed in polyethene films using supercritical carbon dioxide

Extraction with supercritical carbon dioxide was used to quantity the amounts of seven different aroma vapours sorbed in polyethene films. The method was found to completely extract all aroma compounds from the films. The solution of aroma compounds in the polymer films decreased with increasing polymer density. Monoterpenes were always completely sorbed in the films, whereas aldehydes and ketones had a much lower affinity for the films. The sulphur-containing compound, thiophene, was difficult to analyse due to its adsorption on metal surfaces.     

The electrochemical properties of imidazol-linked iron phthalocyanine—carbon electrodes

Electrodes for the electrochemical reduction of oxygen have been studied galvanostatically. The electrodes were of the activated carbon-polymeric iron phthalocyanine (FePc) type, made hydrophobic with a Teflon treatment. A link between the FePc and the carbon was achieved by covalently binding imidazol to the carbon surface and then letting the FePc co-ordinate to the free nitrogen of the imidazol molecule. In this way an initial improvement of the stability of the electrode potential and the polarization data was achieved. It has furthermore been established that the potential responds more rapidly to changes, i.e. it is more reversible, than an analogous electrode based on carbon that has not been treated with imidazol.     

Titanium implants and BMP-7 in bone: an experimental model in the rabbit

This study evaluates the effect of rhBMP-7/OP-1 on the osseointegration of commercially pure titanium implants in an experimental implant model in rabbits. Threaded titanium implants with two transverse parallel canals were inserted in the femur and tibia of rabbits. The canals were filled with, 10 g of BMP-7/collagen carrier, pure collagen carrier or were left empty as a control. The stiffness of the implant fixation was evaluated by Resonance Frequency Analysis (RFA) at baseline and four weeks postoperativly. Percentage of bone ingrowth in the canals was measured on microradiographs. Histomorphometry along the threaded part of the implants was performed on 15 m thin sections. The results from the RFA demonstrated a higher mean value for the BMP-7 treated implants in the tibia than the carrier treated implants but not compared to the control implants. The control implants in the tibia demonstrated more bone ingrowth in the upper canal than to the carrier or the BMP-7 treated implants. Apart from these differences there were no significant effects of BMP. In this study BMP-7 did not contribute to any substantially improved bone anchorage of titanium implants.     

Oxidized implants and their influence on the bone response

Surface oxide properties are regarded to be of great importance in establishing successful osseointegration of titanium implants. Despite a large number of theoretical questions on the precise role of oxide properties of titanium implants, current knowledge obtained from in vivo studies is lacking. The present study is designed to address two aspects. The first is to verify whether oxide properties of titanium implants indeed influence the in vivo bone tissue responses. The second, is to investigate what oxide properties underline such bone tissue responses. For these purposes, screw-shaped/turned implants have been prepared by electrochemical oxidation methods, resulting in a wide range of oxide properties in terms of: (i) oxide thickness ranging from 200 to 1000 nm, (ii) the surface morphology of barrier and porous oxide film structures, (iii) micro pore configuration - pore sizes<8 microm by length, about 1.27 microm2 to 2.1 microm2 by area and porosity of about 12.7-24.4%, (iv) the crystal structures of amorphous, anatase and mixtures of anatase and rutile type, (v) the chemical compositions of TiO2 and finally, (vi) surface roughness of 0.96-1.03 microm (Sa). These implant oxide properties were divided into test implant samples of Group II, III, IV and V. Control samples (Group I) were turned commercially pure titanium implants. Quantitative bone tissue responses were evaluated biomechanically by resonance frequency analysis (RFA) and removal torque (RT) test. Quantitative histomorphometric analyses and qualitative enzyme histochemical detection of alkaline (ALP) and acidic phosphatase (ACP) activities were investigated on cut and ground sections after six weeks of implant insertion in rabbit tibia. In essence, from the biomechanical and quantitative histomorphometric measurements we concluded that oxide properties of titanium implants, i.e. the oxide thickness, the microporous structure, and the crystallinity significantly influence the bone tissue response. At this stage, however, it is not clear whether oxide properties influence the bone tissue response separately or synergistically.     

Fluorescence lidar imaging of historical monuments

What is believed to be the first fluorescence imaging of the facades of a historical building, which was accomplished with a scanning fluorescence lidar system, is reported. The mobile system was placed at a distance of ~60 m from the medieval Lund Cathedral (Sweden), and a 355-nm pulsed laser beam was swept over the stone facades row by row while spectrally resolved fluorescence signals of each measurement point were recorded. By multispectral image processing, either by formation of simple spectral-band ratios or by use of multivariate techniques, areas with different spectral signatures were classified. In particular, biological growth was observed and different stone types were distinguished. The technique can yield data for use in facade status assessment and restoration planning.     

Novel Optical Phase Demodulator Based on a Sampling Phase-Locked Loop

A novel phase-locked coherent demodulator, based on a sampling phase-locked loop, is presented and investigated theoretically. The demodulator is capable of operating at high frequencies, by using optical sampling to downconvert the high-frequency input radio-frequency signal to the frequency range of the baseband loop. We develop a detailed theoretical model of the (sampling) phase-locked coherent demodulator and perform detailed numerical simulations. The simulation results show that the operation of the sampling demodulator resembles the operation of the baseband demodulator for very short optical pulses (<2 ps). Furthermore, we investigate how the signal-to-noise ratio of the demodulator is affected by timing and amplitude jitter of the pulsed optical source     

Residual models and stochastic realization in state-space identification

This paper presents theory and algorithms for validation in system identification of state-space models from finite input-output sequences in a subspace model identification framework. Our formulation includes the problem of rank-deficient residual covariance matrices, a case which is encountered in applications with mixed stochastic-deterministic input-output properties as well as for cases where outputs are linearly dependent. Similar to the case of prediction-error identification, it is shown that the resulting model can be decomposed into an input-output model and a stochastic innovations model. Using the Riccati equation, we have designed a procedure to provide a reduced-order stochastic model that is minimal with respect to system order as well as the number of stochastic inputs thereby avoiding several problems appearing in standard application of stochastic realization to the model validation problem.     

The sterol composition of freshly harvested compared to stored seeds of rape,sunflower and poppy

The composition of the free sterols and the sterol esters of freshly harvested seeds of rape, sunflower and poppy was compared to that of stored seeds. The sterol composition of rapeseed was not changed during storage, whereas in sunflower seed the free sterols had less of Δ5-avenasterol and Δ7-stigmastenol in ten-month-old seeds compared to fresh seeds. The greatest relative changes were observed for esterified sterols in poppy seed, with a drop in the percentage of Δ5-avenasterol from 25.3% in freshly harvested to 16.9% in seeds stored for 10 months.