The effect of cyclic stress on the physical properties of a poly(dimethylsiloxane) elastomer

The dynamic creep behavior of a filled poly(dimethylsiloxane) elastomer was studied under cyclic stress. The stress level was chosen such that the increase in the internal temperature was small and that microcracks were not observed. This work has demonstrated that cyclic stress in combination with high temperature accelerates the degradation of the elastomer. The results suggest that because of the applied force, breaks in the load-bearing chains of the network occur. These breaks, while relieving the mechanical stress, create highly reactive ionic fragments. It is believed that because of the subsequent reactions of the ionic fragments, changes in the specific gravity, storage modulus, effective crosslink density, and length of the sample (creep) are observed. The observed decrease in the storage modulus is thought to occur because of the reaction of the ionic fragments with moisture, which results in the formation of silanol chain ends that reduce the effective crosslink density. The results also show that contrary to the prediction of the Boltzmann's Superposition Principle, the rate of creep is greatly enhanced when the sample is subjected to a sinusoidally varying dynamic load as compared to a comparable static load. The polymer weight loss was found to be linear with time and strongly dependent on the level of applied dynamic and static force. In addition, the weight loss and rate of creep were also found to be strongly dependent upon temperature.     

Comparisons of taste perceptions and preferences of Japanese and Australian consumers: overview and implications for cross-cultural sensory research

A program of research that compared the taste perceptions and preferences of Japanese and Australian consumer panels is reviewed from the point of view of the general issues that have emerged. These studies revealed few cross-cultural differences in the perceptions of the panels, implicating an important role for dietary experience in differences in preference. There was also little evidence for cross-cultural influences on panellists' assessment behaviour, such as scale usage. Studies of predominantly sweet and salty foods from both Australia and Japan illustrated the importance of familiarity with the overall product as an influence on the assessment of individual sensory characteristics. Subsequent attempts to overcome this influence by comparing cross-cultural responses to the manipulation of tastes within foods common to both cultures revealed no differences in the optimum tastant level within each of the foods. The implications of these studies for future cross-cultural research is addressed, and it is argued that future studies need to develop methods for determining the acceptability of relatively novel foods specifically developed for export markets, and also to address the complexity of food preferences from the point of view of both sensory and non-sensory influences.     

Response spectrum analysis of piping systems with elastic-plastic gap supports

A new seismic support device and its application in piping systems is described. The device, E-BAR (patented), can be cost effectively used for snubber replacement programs, mitigation of hydraulic transients, pipe whip and as a thermal stop. The device has pre-set gaps to allow free thermal movement. During a seismic or other dynamic load event, if the pipe movement exceeds the gap dimension, the device acts as an elastic or elastic-plastic restraint. The device also has a unique design feature for not exceeding the restraint force beyond a specified limit design value. To analyze piping systems with gap supports having elastic-plastic characteristics, modal analysis procedures for both response spectrum and time history methods are developed. The comparison of responses obtained from the procedures with nonlinear time history analysis and test results available in the literature shows excellent correlation. A pilot program conducted for snubber replacement with E-BARs demonstrates that the limit force feature of E-BAR makes them very attractive for snubber replacement. This is because a particular E-BAR with a specified limit design force can be selected, such that, the E-BAR replacing the snubber does not require any modifications be made to the existing support steel and hardware.     

A reduced basis approach to quantifying damage dependent dynamic response of laminated composite structures

A finite element (FE) based formulation is utilized to represent the damage-dependent response of laminated composite structures. An internal-state-variable (ISV) approach provides a definition of the stiffness reduction caused by intralaminar crack propagation at the ply level. These ISVs are combined with simple stress criteria to accommodate ply property changes caused by fiber fracture, fiber microbuckling and interior delaminations. A set of orthogonal Ritz vectors are chosen as basis vectors to transform the dynamical equations of motion to a reduced coordinate space. The reduced basis form of the equations provides significant numerical efficiencies, especially for large ordered systems. Furthermore, damping and its variation with damage can be generally represented in any number of vibratory modes. The Newmark integration operator is used to solve the dynamic equations of motion, and equilibrium iterations are performed in each incremental time step to assure convergence. Results are given for laminated beam and plate geometries subjected to dynamic loads.     

"Adolescent psychopathology: I. Prevalence and incidence of depression and other DSM-III—R disorders in high school students": Correction.

Reports an error in the original article by P. M. Lewinsohn et al ( Journal of Abnormal Psychology, 1993[Feb], Vol 102[1], 133–244). On page 140, in the Total Incidence columns in Table 4, the data for the Attention Deficit row should be switched with that for the Conduct row. (The following abstract of this article originally appeared in record 1993-25780-001.) Data were collected on the point and lifetime prevalences, 1-yr incidence, and comorbidity of depression with other Diagnostic and Statistical Manual of Mental Disorders-III-Revised (DSM-III-R) disorders in a randomly selected sample (n?=?1,710) of high school students at point of entry and at 1-yr follow-up (n?=?1,508). The Schedule for Affective Disorders and Schizophrenia for School-Age Children was used to collect diagnostic information; 9.6% met criteria for a current disorder, more than 33% had experienced a disorder over their lifetimes, and 31.7% of the latter had experienced a 2nd disorder. High relapse rates were found for all disorders, especially for unipolar depression (18.4%) and substance use (15.0%). Female Ss had significantly higher rates at all age levels for unipolar depression, anxiety disorders, eating disorders, and adjustment disorders; male Ss had higher rates of disruptive behavior disorders. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Assessment practices of clinical psychologists.

Comments on the article by C. E. Watkins et al (see record 1995-23048-001) on the practice of psychological assessment by clinical psychologists. According to Hunsley, their conclusion that the basic practice of assessment has changed little in the past 30 yrs is not warranted because of the nature of the survey data used. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Geometric model for nuclear absorption from microscopic theory

A parameter-free geometric model for nuclear absorption is derived from microscopic theory. The expression for the absorption cross section in the eikonal approximation taken in integral form is separated into a geometric contribution, described by an energy-dependent effective radius, and two surface terms which are shown to cancel in an asymptotic series expansion. For collisions of light nuclei, an expression for the effective radius is derived using harmonic-oscillator nuclear density functions. A direct extension to heavy nuclei with Woods-Saxon densities is made by identifying the equivalent half density radius for the harmonic-oscillator functions. Coulomb corrections are incorporated and a simplified geometric form of the Bradt-Peters type obtained. Results spanning the energy range of 1 MeV/nucleon to 1 GeV/nucleon are presented. Good agreement with experimental results are obtained.     

Savings in relearning: II. On the formation of behavior-based trait associations and inferences.

Five experiments based on Carlston and Skowronski's (1994) relearning paradigm suggest that people spontaneously derive trait knowledge about actors from behaviors but that this knowledge may reflect either explicit trait inference processes or implicit actor–trait associations. Experiments 1 and 2 found that inference-instructed and control Ss showed equivalent savings in subsequent efforts to learn actor–trait pairs but not when instructed Ss initially inferred the wrong trait. Experiment 3 showed that savings were equivalent for stimuli from different sources, and Experiment 4 showed that savings effects persisted even when the target was only incidentally associated with a stimulus behavior. Finally, Experiment 5 suggests that after several days, even explicit trait inferences can become inaccessible to intentional retrieval, although the earlier experiments show that they continue to exert an implicit effect on learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

SURFACE TENSION AND BUOYANCY DRIVEN INSTABILITIES IN A LAYER OF LIQUID TIN HEATED FROM BELOW

The linear theory of Pearson (1958) and Nield (1964) is modified here to study liquid tin and include the finite thermal resistances of the bounding layers of boron nitride, copper and air (∼10^-2 torr) in the experiments of Ginde et al. (1989). The magnitude of the ΔT_c across the layer of liquid tin required for the onset of convection depends on the ratios of the thermal conductivities and thicknesses of the supporting layers of boron nitride and copper to those of the tin.

According to our theory surface tension contributes more than buoyancy to the instability observed experimentally. The critical ΔT_c observed required for the onset of convection in the layer of tin, is up to 25% lower than that predicted, which shows the layer is less stable than the theory indicates. Thus the surface of the tin was uncontaminated, or a significantly larger observed critical ΔT_c would be expected.

The boundary condition on the thermal fluctuations at the base of the supporting layer of copper does not appear to be important in these experiments. However, the thermal resistance of the boron nitride would have to be assumed to be unrealistically large to obtain agreement within experimental error with the theory.