Detection of Legionella spp. and some of their amoeba hosts in floating biofilms from anthropogenic and natural aquatic environments

Floating biofilms develop at the water-air interface and harbor numerous microorganisms, some of which are human pathogens like Legionella pneumophila. The presence of Legionella spp. and especially L. pneumophila in such biofilms was investigated. In parallel, the occurrence of Naegleria spp., Acanthamoeba spp., Willaertia spp., Vahlkampfia spp. and Hartmanella spp. was determined and it was examined whether Acanthamoeba spp. isolates were naturally infected with L. pneumophila bacteria. Eight anthropogenic and 37 natural aquatic environments were sampled between June and August 2005. Both Legionella spp. and L. pneumophila were present in 100% of the floating biofilms of the anthropogenic aquatic systems. Eighty-one percent of all natural floating biofilm samples were positive for Legionella spp. and 70% of these samples were positive for L. pneumophila. Legionella concentrations were in the range of 10(1)-10(2)cells/cm(2). Naegleria spp. and Acanthamoeba spp., two well-known L. pneumophila amoeba hosts, were present in 50-92% and 67-72% of floating biofilm samples, respectively. Acanthamoeba spp. isolates appeared to be naturally infected with L. pneumophila bacteria as proved by fluorescent in situ hybridization.     

Temperature-Dependent Re-alignment of the Short Multifunctional Peptide BP100 in Membranes Revealed by Solid-State NMR Spectroscopy and Molecular Dynamics Simulations

BP100 is a cationic undecamer peptide with antimicrobial and cell-penetrating activities. The orientation of this amphiphilic α-helix in lipid bilayers was examined under numerous conditions using solid-state ¹⁹F, ¹⁵N and ²H NMR. At high temperatures in saturated phosphatidylcholine lipids, BP100 lies flat on the membrane surface, as expected. Upon lowering the temperature towards the lipid phase transition, the helix is found to flip into an upright transmembrane orientation. In thin bilayers, this inserted state was stable at low peptide concentration, but thicker membranes required higher peptide concentrations. In the presence of lysolipids, the inserted state prevailed even at high temperature. Molecular dynamics simulations suggest that BP100 monomer insertion can be stabilized by snorkeling lysine side chains. These results demonstrate that even a very short helix like BP100 can span (and thereby penetrate through) a cellular membrane under suitable conditions.     

Recombinant tropomyosin from Penaeus aztecus (rPen a 1) for measurement of specific immunoglobulin E antibodies relevant in food allergy to crustaceans and other invertebrates

Immunoglobulin E (IgE)-mediated food allergy to crustaceans and mollusks is relatively common and affected individuals typically react to a range of different species. The only known major allergen of shrimp was first described over 20 years ago and later identified as the muscle protein tropomyosin. This protein may be useful as a defined and relevant diagnostic marker for allergic sensitization to invertebrate foods. In order to generate an assay reagent suitable for this purpose, tropomyosin from the shrimp Penaeus aztecus (Pen a 1) was produced as a recombinant protein in Escherichia coli and characterized with respect to IgE antibody binding properties in comparison to natural shrimp tropomyosin. Hexahistidine-tagged rPen a 1 accumulated as a predominantly soluble protein in the E. coli expression host and a two-step chromatographic procedure provided a high yield of pure and homogeneous protein. rPen a 1 displayed chromatographic and folding characteristics similar to those of purified natural shrimp tropomyosin. Serum preincubation with serial protein dilutions revealed similar capacity of recombinant and natural tropomyosin to compete with immobilized shrimp extract for IgE binding. rPen a 1 was further shown to extensively and specifically compete for IgE binding to extracts of other crustacean species, house dust mite and German cockroach.     

Influence of pressure losses on compressor performance in a pressurized fuel cell air supply system for airplane applications

Low ambient pressures at elevated flight altitudes lead to power losses in fuel cell powered aircrafts. As countermeasure ambient air can be pressurized with a suitable fuel cell air supply system. In this study the influence of low ambient pressures and pressure losses within the system on the performance of two turbo compressors and the resulting stack power are examined theoretically and the findings validated experimentally. Results show that decreasing ambient pressures and pressure losses in front and after the compressor reduce the maximum pressure from 2.4 to 1.6 bar(a) in the examined system. Air compression may require a significant share of the fuel cell stack power and the maximum system power is reduced from 54 to 41 kW. For air pressures higher than 1.8 bar(a) the fuel cell stack power gain due to pressurization is found to be cancelled out by the increasing power required for air compression.     

Passive Treatment of Circumneutral Mine Drainage from the St. Louis Mine Tunnel,Rico, CO: Part 1—Case Study: Characteristics of the Mine Drainage

This publication is a case study of the seasonal variability of mine water drainage from the Saint Louis Tunnel (SLT) at the inactive Rico-Argentine mine site located in southwestern Colorado. It is an introductory paper for the two passive water treatment system technology evaluations contained in this issue. Mine water chemistry changes from baseflow to a snowmelt runoff event (SMRE) where snowmelt runoff follows preferential migration pathways to flush acidic weathering products from the upper mine workings to the SLT. Baseflow mine drainage is characterized as circumneutral, with Zn, Cd, Mn, and Ni concentrations primarily in the dissolved form. Dissolved Zn, Mn, Fe, and potentially Cd illustrate equilibrium with carbonate minerals. Total concentrations of Fe, Cu, Pb, and As are primarily in the suspended form and suggest sorption to Fe oxides. Mine water chemistry during the SMRE reflects mixing of circumneutral baseflow waters with more acidic waters flushing the upper mine workings. Geothermal activity provides for a consistently warm mine water discharge from the SLT. The two seasons that provide the most challenge to passive water treatment of SLT mine drainage are the SMRE period and the low flow stage of the Dolores River. Mine water flow and chemistry during SMRE are highly correlated with Dolores River flow and this site conceptual model was and will be used to assist in pilot project evaluation, water treatment system design, monitoring system design, a seasonal compliance approach, and water management.

     

Inverse problems involving the one-way wave equation: medium function reconstruction

Inverse problems are considered for the linear one-way one-dimensional wave equation or transport equation. In particular the wave speed reconstruction problem for a medium is discussed. Inverse problems for non-stationary, but also non-dispersive, media are examined; this means problems for which the slab medium parameters are both spatially and temporally varying are considered. Both theoretical and numerical results are given for the methods presented. Theoretical results obtained for this equation can be generalised to second order equations.     

Current oscillations during chronoamperometric and cyclic voltammetric measurements in alkaline Cu(II)-citrate solutions

It is demonstrated that current oscillations can be observed during chronoamperometric and cyclic voltammetric experiments in solutions containing 0.4 M CuSO₄ and 1.2 M citrate at pH 11 and 50 °C. The oscillations, which are shown to originate from local variations in the pH, result in the deposition of nanostructured Cu and Cu₂O materials. It is concluded that the current oscillations are analogous to the previously described potential oscillations obtained under controlled current conditions in alkaline Cu(II)-lactate, -tartrate and -citrate solutions. Rotating disk electrode results clearly show that the reduction of the Cu(II)-complexes is kinetically controlled and that the rate of the reduction increases with increasing pH and temperature. It is also shown that the presence of a cathodic peak on the anodic scan in the cyclic voltammograms can be used to identify the experimental conditions leading to the spontaneous current (or potential) oscillations. Electrochemical quartz crystal microbalance results indicate that the cathodic peak stems from an increased rate of the reduction of the Cu(II)-citrate complexes due to a rapid increase in the local pH. This causes Cu₂O rather than Cu to be deposited which, however, results in a decrease in the local pH and a decreasing current. In situ ellipsometry data confirm that Cu₂O deposition replaces that of Cu in the potential region of the cathodic peak. The present findings should facilitate syntheses of nanolayered materials based on spontaneous potential or current oscillations.     

Antioxidant properties of garden strawberry leaf extract and its effect on fish oil oxidation

The present study characterises garden strawberry leaf extract and reports its effect on shelf life and quality characteristics of fish oil. Radical scavenging capacity of the extract in DPPH^? and ABTS^?+ assays was equivalent to 1207 and 1579 μmol g^?1 of trolox equivalents, respectively, total phenolic content was 257 mg g^?1 of gallic acid equivalents. Phenolic and volatile constituents were analysed by liquid chromatography/mass spectrometry (LC/MS) and gas chromatography/mass spectrometry (GC/MS). The extract was added to fish oil and its oxidation was followed during 42 days: peroxide, p‐anisidine values and hexanal concentration were lower in the samples with extract, particularly at the end of storage. The effect of extract on fatty acid composition was not significant, however the changes in the percentages of some individual acids were observed. Fish oil containing 5% of extract had lower levels of lipid oxidation in comparison to other samples. The results indicate that strawberry leaves could be a potential source of natural antioxidants.     

Next generation interconnective laser patterning of CIGS thin film modules

Laser patterning of thin film solar cells has proven technically feasible for all layers but still remains a challenging topic for research and development. We present a method where P2 laser patterning of CIGS thin film solar modules is performed after deposition of the ZnO:Al layer, as opposed to the current state-of-the-art where patterning is performed before the ZnO:Al layer is deposited. This method takes full advantage of the potential of laser processing and works by creating an interconnecting scribe line that “welds” the ZnO:Al and CIGS layers into an electrical contact. In this work we present experimental results of this process on five different sets of CIGS with slightly varying thickness and Cu content. While optimization of the process with respect to the various layers has not been performed, the initial results for CIGS thin film modules show working experimental modules in each set. The best experimental module has a fill factor of 71% and its performance is within the standard deviation of mechanically patterned references. An experimental submodule of 30×30 cm² size with 10% efficiency was manufactured.