48 Gbit/s InP DHBT MS-DFF with very low time jitter

A master-slave D-type flip-flop (MS DFF) fabricated in a self-aligned InP DHBT technology is presented. The packaged circuit shows full-rate clock operation at 48 Gbit/s. Very low time jitter and good retiming capabilities are observed. Layout aspects, packaging and measurement issues are discussed in particular     

Power consumption reduction through elastic data rate adaptation in survivable multi-layer optical networks

Network survivability requires the provisioning of backup resources in order to protect active traffic against any failure scenario. Backup resources, however, can remain unused most of the time while the network is not in failure condition, inducing high power consumption wastage, if fully powered on. In this paper, we highlight the power consumption wastage of the additional resources for survivability in IP/multi-protocol label switching (MPLS) over dense wavelength division multiplexing multi-layer optical networks. We assume MPLS protection switching as the failure recovery mechanism in the network, a solution interesting for current network operators to ensure fast recovery as well as fine-grained recovery treatment per label switched path. Next, we quantitatively show how elastic optical technologies can effectively reduce such a power consumption by dynamically adjusting the data rate of the transponders to the carried amount of traffic.     

An efficiently implementable maximum likelihood decoding algorithm for tailbiting codes

Convolutional tailbiting codes are widely used in mobile systems to perform error-correcting strategies of data and control information. Unlike zero tail codes, tailbiting codes do not reset the encoder memory at the end of each data block, improving the code efficiency for short block lengths. The objective of this work is to propose a low-complexity maximum likelihood decoding algorithm for convolutional tailbiting codes based on the Viterbi algorithm. The performance of the proposed solution is compared to that of another maximum likelihood decoding strategy which is based on the A* algorithm. The computational load and the memory requirements of both algorithms are also analysed in order to perform a fair comparison between them. Numerical results considering realistic transmission conditions show the lower memory requirements of the proposed solution, which makes its implementation more suitable for devices with limited resources.     

The Priming Effects of Virtual Environments on Interpersonal Perceptions and Behaviors

This study investigated how virtual environments prime subsequent interpersonal relations among unacquainted individuals. Participants met in a virtual library or a café. Individuals in the virtual library perceived greater self and partner formality compared to those in the café. In addition, more self‐disclosure correlated with less formality only in the library, showing how revealing more about oneself goes against library norms. In contrast, perceived warmth and word counts were at the center of the effects found in the virtual café. Partner warmth and word counts also mediated the effect of the environments on formality. Overall, this article advances priming research in stimuli‐rich virtual settings by showing how environmental salience and activation of contextual norms affected interpersonal perceptions among unacquainted partners.     

On the relationship between the GLRT and UMPI tests for the detection of signals with unknown parameters

The generalized likelihood ratio test (GLRT) is widely used in signal processing applications such as image processing, wireless communications, medical imaging, classification, and signal detection. However, the GLRT does not have many known properties, other than that it is invariant, uniformly most powerful invariant (UMPI) for problems that fit the linear model, and asymptotically (N/spl rarr//spl infin/) UMPI in general. Since it is invariant, it belongs to the class of tests for which the UMPI test is optimal. In this paper, we consider a general class of detection problems in which unknown signal parameters imply a problem invariance that can be described analytically by orthogonal subgroups. This invariance is natural for problems with unknown signal parameters and, for example, include those of the matched subspace detectors of Scharf and Friedlander. We derive the GLRT and UMPI detectors for this general signal class for the case of Gaussian noise. An expression is found that relates the two test statistics showing the UMPI statistic to be the sum of two terms, one of which is the GLRT. Using this, we find that the GLRT and UMPI tests are asymptotically equivalent as signal-to-noise ratio (SNR) approaches infinity (or as probability of false alarm approaches zero). These results are illustrated by extending an example given by Nicolls and de Jager to show the analytic relationship between the GLRT and UMPI tests. The results indicate that the performance between the tests becomes close at signal-to-noise ratios (SNRs) associated with operating points of the receiver operating curve that are typically of interest in signal detection applications.     

Water activity,water glass dynamics,and the control of microbiological growth in foods

Water is probably the single most important factor governing microbial spoilage in foods, and the concept of water activity (a_w) has been very valuable because measured values generally correlate well with the potential for growth and metabolic activity. Despite some drawbacks (e.g., solute effect), the concept of a_w has assisted food scientists in their effort to predict the onset of food spoilage as well as to control food‐borne disease hazards in food products. In the last decade the concept of a_w has been challenged. It has been suggested that reduced‐moisture food products (e.g., low and intermediate) may be nonequilibrium systems and that most of them are in the amorphous metastable state, which is very sensitive to changes in moisture content and temperature. It has been proposed that the glass transition temperature T_g (temperature at which the glass‐rubber transition occurs), is a parameter that can determine many product properties, the safety of foods among them. The concept of water dynamics, originating in a food polymer science approach, has been suggested instead of a_w to better predict the microbial stability of intermediate‐moisture foods. The usage of a_w to predict microbial safety of foods has been discouraged on the basis that (1) in intermediate‐moisture foods the measured water vapor pressure is not an equilibrium one, and because a_w is a thermodynamic concept, it refers only to equilibrium; and (2) the microbial response may differ at a particular a_w when the latter is obtained with different solutes.

This review analyzes these suggestions on the basis of abundant experimental evidence found in the literature. It is concluded that nonequilibrium effects (e.g., inability of water to diffuse in a semimoist food) appear to be in many cases slow within the time frame (food's shelf life) of the experiments and/or so small that they do not affect seriously the application of the a_w concept as a predictor of microbial stability in foods.

The claims that a food science polymer approach to understanding the behavior of aqueous sugar glasses and concentrated solutions may be used to predict the microbial stability of food systems is not substantiated by experimental evidence. This approach does not offer, at the present time, a better alternative to the concept of a_w as a predictor of microbial growth in foods.

It is also recognized that a_w has several limitations and should be always used carefully, and this must include precautions regarding the possible influences of nonequilibrium situations. This aspect may be summarized by simply saying that anyone who is going to employ the term water activity must be aware of the implications of its definition.     

Hybrid Organic/Inorganic Nanostructures for Highly Sensitive Photoelectrochemical Detection of Dissolved Oxygen in Aqueous Media

Precise, reliable, and remote measurement of dissolved oxygen in aqueous media is of great importance for many industrial, environmental, and biological applications. In particular, photoelectrochemical sensors working in differential mode have recently demonstrated promising properties, in terms of stability, sensitivity, and application potential. Here, a new approach is presented, combining visible light sensitivity, efficient photocurrent generation, and solution‐processed fabrication methods of conjugated polymers, with charge carriers selectivity, energetic alignment favorable to efficient interfacial charge transfer and high surface area achievable by using metal oxide nanostructures. Extensive characterization and optimization of the hybrid organic/inorganic system are carried out, leading to the realization of an oxygen sensor device, based on nanostructured palladium oxide/poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole]/[6,6]phenyl‐C61‐butyric acid methyl ester (PdO/APFO‐3:PCBM) as materials of choice. State‐of‐the‐art sensitivity, amounting at ?5.87 μA cm^?2 ppm^?1, low background signal, in the order of ?4.85 μA cm^?2, good electrochemical stability for more than 2 h of continuous functioning and high reproducibility of the signal over the pH 1 to 10 range, are reported, making the hybrid device suitable for several practical uses. The results fully validate the mixed organic/inorganic approach for photoelectrochemical applications, and pave the way for its further exploitation in fields like waste water treatment, environmental monitoring, and water splitting.     

Toward a direct measure of video quality perception using EEG

An approach to the direct measurement of perception of video quality change using electroencephalography (EEG) is presented. Subjects viewed 8-s video clips while their brain activity was registered using EEG. The video signal was either uncompressed at full length or changed from uncompressed to a lower quality level at a random time point. The distortions were introduced by a hybrid video codec. Subjects had to indicate whether they had perceived a quality change. In response to a quality change, a positive voltage change in EEG (the so-called P3 component) was observed at latency of about 400-600 ms for all subjects. The voltage change positively correlated with the magnitude of the video quality change, substantiating the P3 component as a graded neural index of the perception of video quality change within the presented paradigm. By applying machine learning techniques, we could classify on a single-trial basis whether a subject perceived a quality change. Interestingly, some video clips wherein changes were missed (i.e., not reported) by the subject were classified as quality changes, suggesting that the brain detected a change, although the subject did not press a button. In conclusion, abrupt changes of video quality give rise to specific components in the EEG that can be detected on a single-trial basis. Potentially, a neurotechnological approach to video assessment could lead to a more objective quantification of quality change detection, overcoming the limitations of subjective approaches (such as subjective bias and the requirement of an overt response). Furthermore, it allows for real-time applications wherein the brain response to a video clip is monitored while it is being viewed.     

Liquid Metal Based Island‐Bridge Architectures for All Printed Stretchable Electrochemical Devices

The adoption of epidermal electronics into everyday life requires new design and fabrication paradigms, transitioning away from traditional rigid, bulky electronics towards soft devices that adapt with high intimacy to the human body. Here, a new strategy is reported for fabricating achieving highly stretchable “island‐bridge” (IB) electrochemical devices based on thick‐film printing process involving merging the deterministic IB architecture with stress‐enduring composite silver (Ag) inks based on eutectic gallium‐indium particles (EGaInPs) as dynamic electrical anchors within the inside the percolated network. The fabrication of free‐standing soft Ag‐EGaInPs‐based serpentine “bridges” enables the printed microstructures to maintain mechanical and electrical properties under an extreme (≈800%) strain. Coupling these highly stretchable “bridges” with rigid multifunctional “island” electrodes allows the realization of electrochemical devices that can sustain high mechanical deformation while displaying an extremely attractive and stable electrochemical performance. The advantages and practical utility of the new printed Ag‐liquid metal‐based island‐bridge designs are discussed and illustrated using a wearable biofuel cell. Such new scalable and tunable fabrication strategy will allow to incorporate a wide range of materials into a single device towards a wide range of applications in wearable electronics.