Integrated instrumental chain for magnetic pulse measurement in strong static field environment

This paper describes an integrated analogue instrumental chain dedicated to measuring magnetic pulses with an amplitude of a few tens or hundreds of microteslas, superimposed to a strong static magnetic field, i.e. 1.5 T. The system features a silicon Hall sensor with nested-chopping-like biasing circuitry, DC Hall voltage compensation, amplifying and multistage filtering. Low-noise performances are achieved by applying 100 kHz spinning current to the Hall device and chopping at 200 kHz to the signal conditioning blocs downstream. The microsystem achieves 20 μT resolution over a 1.6 kHz bandwidth extending from 5 Hz to 1.6 kHz under 1.5 T static field.     

Detection and Localization of Delaminations in Thin Carbon Fiber Reinforced Composites with the Ultrasonic Polar Scan

In this paper, the hybrid compliance-stiffness matrix method for simulating wave propagation in (delaminated) multilayered media with viscoelastic anisotropy has been confronted with high-quality amplitude and phase experiments on delaminated composites, obtained using the ultrasonic polar scan setup (UPS) in transmission by considering harmonic as well as pulsed ultrasound. Results are presented for multiple thin carbon/epoxy laminates with an artificial edge delamination induced by a foil insert, showing a good agreement between experimental recording and numerical modeling. The obtained results further reveal the feasibility of the harmonic UPS to detect and even locate the depth-position of multiple delaminations in fiber reinforced composites. Considering that the harmonic UPS method does not rely on the detection of different echoes like the classical C-scan, but rather expounds the conditions for efficient stimulation of guided waves in the solid, the method is found to be highly suited for inspecting thin composite materials for the presence of delaminations.     

Sources of Inter-Firm Heterogeneity in Accessing Knowledge-Creation Benefits Within Technology Clusters

We build on recent literature to highlight the distinction between knowledge-diffusion and knowledge-creation benefits of technology clustering and argue that firms located in technology clusters will have differential access to the latter. To explain the antecedents of such differential access, we first argue that clustering gives rise to three knowledge-creation benefits: easier identification of potential knowledge partners with complementary knowledge, easier initiation of knowledge partnerships and increased effectiveness of knowledge partnerships. Subsequently, we develop a conceptual model and propositions that focus on a cluster firm's awareness of knowledge assets inside the cluster, attractiveness as a knowledge partner and ability to benefit from knowledge partnerships to explain differential access by firms to these three knowledge-creation benefits that clustering provides. This study highlights the theoretical significance of distinguishing externality-type benefits of technology clustering from benefits that firms need to actively pursue, and discusses implications for firms' location decisions.     

Ultrastrong Anchoring Yet Barrier‐Free Adsorption of Composite Microgels at Liquid Interfaces

Microgel particles display an interesting duality with properties attributed typically both to polymeric and colloidal systems. When adsorbed at a liquid‐liquid interface, this duality becomes particularly apparent as the various phenomena at play are governed by different aspects of these soft and responsive particles. The introduction of a solid, fluorescently labeled, polystyrene core into the microgels allows direct and accurate visualization without the necessity of potential perturbing sample preparation techniques. By combining in‐situ imaging and tensiometry, we determine that composite microgels at a wide variety of oil‐water interfaces anchor strongly, with adsorption energies of approximately 10⁶ k_BT, typical for particle adsorption, yet accumulate at the interface spontaneously without any energy barrier, which is more typical for polymers. The high adsorption energies allow the particle to spontaneously form very dense crystalline packings at the liquid interface in which the microgels are significantly compressed with respect to their swollen state in bulk solutions. Finally, we demonstrate the unique nature of these particles by producing highly stable and monodisperse microgel‐stabilized droplets using microfluidics.     

Technological learning in bioenergy systems

The main goal of this article is to determine whether cost reductions in different bioenergy systems can be quantified using the experience curve approach, and how specific issues (arising from the complexity of biomass energy systems) can be addressed. This is pursued by case studies on biofuelled combined heat and power (CHP) plants in Sweden, global development of fluidized bed boilers and Danish biogas plants. As secondary goal, the aim is to identify learning mechanisms behind technology development and cost reduction for the biomass energy systems investigated. The case studies reveal large difficulties to devise empirical experience curves for investment costs of biomass-fuelled power plants. To some extent, this is due to lack of (detailed) data. The main reason, however, are varying plant costs due to differences in scale, fuel type, plant layout, region etc. For fluidized bed boiler plants built on a global level, progress ratios (PRs) for the price of entire plants lies approximately between 90–93% (which is typical for large plant-like technologies). The costs for the boiler section alone was found to decline much faster. The experience curve approach delivers better results, when the production costs of the final energy carrier are analyzed. Electricity from biofuelled CHP-plants yields PRs of 91–92%, i.e. an 8–9% reduction of electricity production costs with each cumulative doubling of electricity production. The experience curve for biogas production displays a PR of 85% from 1984 to the beginning of 1990, and then levels to approximately 100% until 2002. For technologies developed on a local level (e.g. biogas plants), learning-by-using and learning-by-interacting are important learning mechanism, while for CHP plants utilizing fluidized bed boilers, upscaling is probably one of the main mechanisms behind cost reductions.     

Physical Metallurgy of Multi‐Phase Steel for Improved Passenger Car Crash‐Worthiness

The dynamic testing of high strength automotive steel grades is of great practical importance if their crash‐worthiness is to be evaluated. During forming operations, steels are processed in a controlled dynamic manner. In collisions, the deformation is different in the sense that the deformation is not controlled, i.e. both strain and strain rate are not pre‐determined. No clear standard testing procedures are currently available to test high strength steels dynamically, in order to evaluate their performance during car crashes. High tensile strength TRIP‐aided steels have been developed by the steel industry because of their promising high strain rate performance. The present contribution focuses on the effect of the strain rate and temperature on the mechanical behaviour of the low alloy high strength TRIP steel. The tests were carried out on the separated phases in order to determine their specific high strain rate deformation response. The temperature‐dependence of the transformation rate of the retained austenite is presented. It is argued that the adiabatic conditions present during high strain rate deformations have a beneficial effect on the behaviour of TRIP steel.     

Thrombin receptor (PAR-1) antagonists. Heterocycle-based peptidomimetics of the SFLLR agonist motif

Phorbol ester treatment of MCF-7 cells led to the tyrosine phosphorylation and activation of PKC delta. However, through Western blot analysis and in vitro immunecomplex kinase assays, we detected a differential localization of tyrosine-phosphorylated PKC delta and catalytically active PKC delta. Catalytically active PKC delta was concentrated in Triton X-100 solubilized-membrane fractions while tyrosine-phosphorylated PKC delta was localized to the cytosol fraction. Phorbol ester treatment of MCF-7 cells stimulated both the time-dependent in vivo association of Src with PKC delta, evidenced in Src immunoprecipitates by the co-immunoprecipitation of PKC delta, and activation of Src, evidenced in Src immunoprecipitates as an increase in reactivity with a Src antibody (clone 28) reactive only with active Src (dephosphorylated on residue 530) and in Src and PKC delta immunoprecipitates by an increase in Src kinase activity. While our data are consistent with reports in the literature showing the activator/stimulus-dependent tyrosine phosphorylation of PKC delta, our data show that the tyrosine phosphorylation of PKC delta is not essential for kinase activity. These results are the first to demonstrate an in vivo association between PKC delta and active Src in the absence of over-expression of either PKC delta or Src, and support the association of Src and PKC delta towards a physiological function.     

Internal hemipelvectomy with intraoperative and external beam radiotherapy in the limb-sparing treatment of a pelvic girdle chondrosarcoma

The case of a patient with an extensive pelvic girdle chondrosarcoma treated with internal hemipelvectomy and intraoperative radiotherapy, followed by adjuvant high-dose external beam radiotherapy, with a successful attempt in achieving long-term local tumor control and limb-sparing treatment is described.     

Mature teratoma identified after postchemotherapy surgery in patients with disseminated nonseminomatous testicular germ cell tumors: a plea for an aggressive surgical approach

BACKGROUND: Mature teratoma is often found in resected retroperitoneal residual tumor masses (RRTM) after chemotherapy for disseminated nonseminomatous testicular germ cell tumors (NSTGCT). The aim of this report is to describe the clinical course of patients after resection of residual teratoma, with particular emphasis on relapse with either growing mature teratoma or secondary non-germ cell malignancy. METHODS: During the period 1979-1995, 113 patients underwent a laparotomy for resection of RRTM after chemotherapy for NSTGCT. Only patients with mature teratoma in the RRTM were included in the current study, and data on the patients who experienced relapse were studied in detail. RESULTS: Mature teratoma was found in 51 patients (45.1%) with RRTM resected after chemotherapy. Nine of these 51 patients (17.6%) relapsed; the relapses resulted from growing mature teratoma in 5 patients (9.8%), secondary non-germ cell malignancy in 3 patients (5.9%), and recurrent germ cell malignancy in 1 patient (2.0%). The primary treatment for all relapsing patients was surgical excision. All five patients with growing mature teratoma are alive without evidence of disease, as is the patient with recurrent germ cell malignancy. One of the three patients with non-germ cell malignancy died of disease, and the remaining two are alive with disease. CONCLUSIONS: Long term follow-up after resection of postchemotherapy residual teratoma is indicated because a proportion of patients develop growing mature teratoma or a secondary non-germ cell malignancy. The treatment for these recurrences should be complete surgical excision.