Nanogeometry matters: unexpected decrease of capillary adhesion forces with increasing relative humidity

The sticking effect between hydrophilic surfaces occurring at increasing relative humidity (RH) is an everyday phenomenon with uncountable implications. Here experimental evidence is presented for a counterintuitive monotonous decrease of the capillary adhesion forces between hydrophilic surfaces with increasing RH for the whole humidity range. It is shown that this unexpected result is related to the actual shape of the asperity at the nanometer scale: a model based on macroscopic thermodynamics predicts this decrease in the adhesion force for a sharp object ending in an almost flat nanometer-sized apex, in full agreement with experiments. This anomalous decrease is due to the fact that a significant growth of the liquid meniscus formed at the contact region with increasing humidity is hindered for this geometry. These results are relevant in the analysis of the dynamical behavior of nanomenisci. They could also have an outstanding value in technological applications, since the undesirable sticking effect between surfaces occurring at increasing RH could be avoided by controlling the shape of the surface asperities at the nanometric scale.     

Changes in Toyota Motors’ operations management

A key driver behind Toyota Motors’ rise to prominence has been the Toyota Production System (TPS). This pillar of the firm's competitive strength was developed over several decades. As of the late 1980s, various changes were introduced into the TPS. Some of these, such as line segmentation, the use of inter-segment buffers and high-tech automation, have been portrayed as breaks with TPS foundations. With virtually no exception published accounts on these changes stop with the situation in the mid-1990s. Based on general literature and three factory visits, this article aims to provide an update on the situation in April 2001.     

Evaluation of the addition of wheat residues in the production of Pinus oocarpa agglomerated panels

Clean Technologies and Environmental Policy - The aim of this research was to evaluate the physical and mechanical properties of Pinus oocarpa wood agglomerated panels produced with the addition of...     

Diosgenin quantification,characterisation and chemical composition in a tuber collection of Dioscorea spp. in the state of Jalisco,Mexico

Dioscorea spp. tubers are known commonly as camote de cerro to the state of Jalisco, México. Besides its use as food, it contains diosgenin, a raw material used widely for synthesising steroid hormones. The purpose of the present research was to determine diosgenin contents by gas chromatography‐mass spectrometry (GC‐MS), as well as physical and chemical characteristics of sixty Dioscorea spp. accessions cultivated in mesh shade coming from eleven localities in the state of Jalisco. Extraction protocol for diosgenin was maceration combined with ethanol 80%. Significant statistical differences for diosgenin content were found between accessions, finding levels between 0.02 and 0.16 mg kg^?1 in dry basis. Length, weight tuber, proportion pulp/skin, percentage of pulp and percentage of skin showed significant differences. Chemical composition based in fresh weight presented in moisture percentage a range of 71.93–83.26%, crude protein 1.42–1.74%, ashes 0.80–1.16%, lipid 0.13–0.17%, crude fibre 3.80–4.02% and total carbohydrates 13.97–25.44%. Results show that tubers from Jalisco can be an important source of nutrients for consumers.     

Identification of New Coloured Anthocyanin–Flavanol Adducts in Pressure-Extracted Pomegranate (<Emphasis Type=BoldItalic>Punica granatum</Emphasis> L.) Juice by High-Performance Liquid Chromatography/Electrospray Ionization Mass Spectrometry

Pomegranate (Punica granatum L.) juice, obtained by pressure extraction of the whole fruit, contains coloured flavanol–anthocyanin adducts (the flavanol occupies the upper part of the dimmer) from the direct condensation between anthocyanidins delphinidin, cyanidin and pelargonidin and flavan-3-ols (epi)gallocatechin, (epi)catechin and (epi)afzelechin. The presence of adducts between these same flavanols and anthocyanidins, but belonging to the coloured anthocyanin–flavanol adduct type (anthocyanin occupies the upper part of the dimmer) has been revealed by reversed-phase liquid chromatography coupled to tandem mass spectrometry (ion trap), with positive electrospray ionization (LC–ESI/MS ⁿ ). These new adducts are isotopic with their corresponding counterparts (flavanol–anthocyanin adducts) and indistinguishable from them by comparison of the mass spectra from the MS² of the isotopic parent ions. However, they can be distinguished by comparison of the mass spectra from the MS³ of their corresponding isotopic aglycons. Hence, the MS³ of the aglycon from a given flavanol–anthocyanin adduct always yields a mass spectrum containing five characteristic ions, the three with smaller m/z being only dependent on the anthocyanidin and the other two on both the anthocyanidin and the flavanol. In contrast, the mass spectrum from the MS³ of the aglycon of its counterpart anthocyanin–flavanol adduct gives only two of the above five characteristic ions, where the ion with smaller m/z only depends on the anthocyanidin and the other on both the anthocyanidin and the flavanol. Ten 3-hexoside derivatives of coloured anthocyanin–flavanol adducts were detected in pomegranate juice being reported for the first time this type of adducts from a natural source.     

Free amino acid content of goat's milk cheese made with animal rennet and plant coagulant

BACKGROUND: Enzymes present in the flowers of Cynara cardunculus (cyprosins) are used in the production of some traditional Spanish and Portuguese cheeses, replacing animal rennet. The aim of this work was to study the changes that take place in free amino acids during the ripening of a goat's milk cheese (Murcia al Vino) manufactured with plant coagulant (PC) or animal rennet (AR). RESULTS: The total free amino acid (TFAA) concentration increased during ripening, with Ile, Val, Ala, Phe, Gaba, Arg and Lys representing more than 50% of the TFAA content at 60 days in both types of cheese. The TFAA concentration was significantly higher in cheeses made with PC (854 mg 100 g^?1 total solids (TS)) than those made with AR (735 mg 100 g^?1 TS). The concentration of most free amino acids, especially His, Ser, Gln, Thr, Ala, Met and Ile, was higher in the PC cheese. CONCLUSION: Cheese made using PC as coagulant presented higher contents of free amino acid throughout the ripening period than cheese made using AR. Therefore we can conclude that the use of PC to produce Murcia al Vino goat's cheese would accelerate the ripening process as a result of increased cyprosin proteolytic activity. Copyright © 2011 Society of Chemical Industry     

Optimization of culture medium composition for manganese peroxidase and tyrosinase production during Reactive Black 5 decolourization by the yeast Trichosporon akiyoshidainum

Decolourization and degradation of the diazo dye Reactive Black 5 was carried out by the yeast Trichosporon akiyoshidainum. A nine-factor Plackett-Burman design was employed for the study and optimization of the decolourization process and production of manganese peroxidase (MnP) and tyrosinase activities. In the present study, 26 individual experiments were conducted and three responses were evaluated. Raising yeast extract concentration significantly enhanced decolourization and MnP production. Carbon and nitrogen sources, glucose and (NH4)2 SO4, showed no significant effect on any response over the concentration range tested. Other culture medium components, such as CaCl2 or MgSO4, could be excluded from the medium formula, as they had no effect on the evaluated responses. Metal ions (Fe, Cu and Mn) showed different effects on decolourization and enzymatic activities. Addition of copper significantly enhanced MnP activity and decreased dye decolourization. On the contrary, iron had a positive effect on decolourization and no effect on enzyme production. Oddly, increasing manganese concentration had a positive effect on tyrosinase production without affecting decolourization or MnP activity. These results strongly suggest that dye decolourization should be regarded as a complex multi-enzymatic process, where optimal medium composition should arise as a compromise between those optimal for each implied enzyme production.     

Biochemical and sensory changes in dry-cured ham salted with partial replacements of NaCl by other chloride salts

The reduction of the content of sodium chloride in dry-cured ham was studied in to prevent the problems related to high sodium intake (i.e. the hypertension). One of the possibilities to reduce the sodium content is the partial replacement of sodium chloride by mixtures of potassium, magnesium and calcium chloride salts. The effect of two salting formulations (formulation II: 50% NaCl-50% KCl and formulation III: 55% NaCl, 25% KCl, 15 CaCl₂ and 5 MgCl₂) on the protease activity through the dry-curing process and on the sensory characteristics of the final product was evaluated and compared to those of control hams (formulation I, 100% NaCl). Sensory attributes were all affected in the hams containing CaCl₂ and MgCl₂ while hams containing 50% KCl and NaCl (formulation II) were better valued, except for the attribute taste probably due to the potassium contribution to bitter taste.