Molecular Insights on the Role of (CTA+)(SiO−) Ion Pair into the Catalytic Activity of [CTA+]–Si–MCM-41

Topics in Catalysis - In this work, a theoretical study in conjunction with a spectroscopic analysis by FTIR were carried out in order to obtain molecular insights on the role of...     

Experimental Design for Optimizing the Cleaning of Starch Adhering to Stainless-Steel Surfaces Using Nonionic Surfactants and Silica Microparticles

The statistical design of experiments has been used to assess the detergency of starch adhering to stainless steel considering three factors: pH, flow rate, and concentration of silica particles in the cleaning solution. The cleaning tests were carried out in a continuous-flow device that simulates the behavior of a Cleaning-In-Place washing system. Different statistical designs were used to evaluate the detergency of cleaning solutions in the absence of surfactants and with two nonionic surfactants, i.e., an ethoxylated alcohol, and an alkylpolyglucoside (APG). Expressions were developed to simulate detergency levels as a function of the variables assayed, determining the optimal detergency of each cleaning solution studied. The results indicate that the variable most influential on detergency was pH. Cleaning solutions with high alkalinity are required to achieve a significant cleaning efficiency. On the other hand, the silica-particle concentration did not influence the detergency results using cleaning solutions without surfactants. Nevertheless, the addition of either the ethoxylated alcohol or the APG to the cleaning solution with silica particles has a significant effect on detergency: it diminished with the ethoxylated alcohol and increased with the APG. Maximum detergency was found at the highest level of pH, particle concentration, and flow rate when the APG was added to the cleaning solution.     

Exploring the anticancer properties of essential oils from family Lamiaceae

Lamiaceae is among the largest families of flowering plants with about 250 genera and over 7,000 species distributed around the world. It is considered as the important source of essential oils, for example, menthol, geraniol, eucalyptol, camphor and thymol. Therefore, it is imperative to study these economically important compounds under in vitro conditions for their sustainable and enhanced production. In addition to proven biological activities, essential oils from this family have recently been evaluated for anticancer activities and considered as a source of anticancer drugs. Mechanisms involved in the essential oils-mediated antiproliferative activity include cell cycle arrest, apoptosis and DNA repair mechanisms. Essential oils also act in the reduction of tumors, inhibiting metastasis and as anti-multidrug resistance molecules. The aim of this review is to assess the anticancer properties of essential oils obtained from different members of family Lamiaceae. The available reports on active components of essential oils and their effect on cancer type and cell line have been discussed. Biotechnological studies to improve the production of essential oils have also been highlighted. Various methods have been adopted to obtain essential oils under in vitro conditions from different plant species of family Lamiaceae, and their production is affected by culture conditions, cultivation mode, utilization of nutrient media and plant growth regulators. The literature survey suggests that essential oils obtained from family Lamiaceae have perspective for the development of new alternatives for disease treatment and prevention.     

Kinetics of pore formation and resulting properties of lightweight inorganic polymers

Inorganic polymer (IP) foams could be used as an alternative to commonly available cellular concretes. To do so, however, it is crucial to understand how the foaming kinetics and the final foam properties can be controlled and tailored to delivered the desired performance. The research reported in this article investigates the influence of the SiO₂/Na₂O ratio of the activating solution, addition time of foaming agent, and temperature, on the reaction kinetics and final properties of a porous IP. The IPs were formed by activating fayalite slag, a by-product of secondary copper production, with a sodium-silicate solution. Foaming was achieved by introducing metallic Al into the formulation, oxidizing it in the alkaline environment, liberating H₂ gas, and entrapping it. Reaction kinetics were assessed using isothermal calorimetry, rheology, and a dedicated setup to record the foaming. The mechanical and physical properties of the foam were assessed via compressive strength and water absorption measurements. Microstructural analysis was undertaken using electron microscopy and computed tomography. The results showed that by decreasing the SiO₂/Na₂O ratio and/or increasing the temperature, the reaction kinetics were accelerated. Regarding the properties, postponing the initiation of the foaming led to more uniform and smaller pores, resulting in an increased compressive strength-to-density ratio.     

Development of novel soy-protein-based superabsorbent matrixes through the addition of salts

The addition of salts, like sodium bicarbonate (SB) or carbonate (SC), into the formulation of bioplastic materials may alter their hydrophilic character to a significant extent. Soy protein isolate (SPI) is a byproduct of the soybean oil industry, which, when properly blended with glycerol (GL), can be further processed through a lab-scale injection molding device. A maximum in the water uptake around 2250 or 2500% is obtained for bioplastics obtained when either SB or SC content is around 1 wt %, respectively. Thus, they exceed the limit to be considered superabsorbent materials (SAMs). Regarding their mechanical properties, a higher presence of SB within the SPI/GL matrix provides materials with a higher extensibility and lower Young's modulus. A higher water uptake is observed after replacing SB for SC in the formulation, probably related to a higher alkalinization of the material as well as to the high hydrophilicity of the carbonate. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47012.     

Aerobic Training in Young Men Increases the Transfer of Cholesterol to High Density Lipoprotein In Vitro: Impact of High Density Lipoprotein Size

Exercise training not only improves the plasma lipid profile but also reduces risk of developing coronary heart disease. We investigate whether plasma lipids and high density lipoprotein (HDL) metabolism are affected by aerobic training and whether the high-density lipoprotein cholesterol (HDL-C) levels at baseline influence exercise-induced changes in HDL. Seventy-one male sedentary volunteers were evaluated and allocated in two subgroups, according to the HLD-C levels (< or >40 mg/dL). Participants underwent an 18-week aerobic training period. Blood was sampled before and after training for biochemical analysis. Plasma lipids, apolipoproteins, HDL diameter, and VO₂ peak were determined. Lipid transfers to HDL were determined in vitro by incubating plasma samples with a donor lipid artificial nanoemulsion. After the 18-week period of aerobic training, the VO₂ peak increased, while the mean body mass index (BMI) decreased. HDL-C concentration was higher after the training period, but low-density lipoprotein cholesterol (LDL-C) and non-HDL-C did not change. The transfer of esterified cholesterol and phospholipids was greater after exercise training, but the triacylglycerol and unesterified cholesterol transfers were unchanged. The HDL particle diameter increased after aerobic training in all participants. When the participants were separated in low-HDL and normal-HDL groups, the postaerobic exercise increment in HDL-C was higher in the low-HDL group, while the transfer of esterified cholesterol was lower. In conclusion, aerobic exercise training increases the lipid transfers to HDL, as measured by an in vitro method, which possibly contributes to the classical elevation of the HDL-C associated with training.     

Drying of industrial sludge waste in a conical spouted bed dryer. Effect of air temperature and air velocity

To determine the performance of a conical spouted bed dryer for the drying of sludge waste, an experimental study of drying in a spouted bed regime was performed under different experimental conditions. The drying performance was determined based on the time evolution of solid moisture content, and the influence of operating conditions (inlet air temperature, air flow rate, and bed mass) on the drying rate of sludge waste in spouted beds of a conical geometry was analyzed.     

Absence of ferromagnetism in ferroelectric Mn-doped BaTiO3 nanofibers

Pure and Mn-doped barium titanate nanofibers were synthesized by the electrospinning method. The morphology, microstructure and crystal structure of as-spun and annealed composite nanofibers were characterized by scanning electron microscopy and transmission electron microscopy. After annealing at 850°C, we obtain nanofibers a few μm long, formed by nanoparticles of irregular shape with sizes around 100 nm. X-ray diffraction and Raman spectroscopy show that a partial phase transition from tetragonal to hexagonal takes place for BaTi_0.90Mn_0.10O₃. Vibrational phonon modes were calculated for BaTiO₃ within the density functional theory (DFT) framework. Ferroelectricity has been probed on pure and Mn-doped BaTiO₃ nanofibers, by means of piezoresponse force microscopy in an atomic force microscope, confirming the polar domain switching behavior of the fibers. The measured piezoelectric coefficient d₃₃ were 31 and 22 pm/V for BaTiO₃ and BaTi_0.90Mn_0.10O₃. Magnetic properties of the samples were probed in a superconducting quantum interference device. Diamagnetic and paramagnetic behaviors were found in pure and Mn-doped samples, respectively.     

Direct ink writing of macroporous lead-free piezoelectric Ba0.85Ca0.15Zr0.1Ti0.9O3

Direct ink writing (DIW) has become a widespread additive manufacturing technique for material engineering, but its application in lead-free Ba_0.85Ca_0.15Zr_0.1Ti_0.9O₃ piezoelectric ceramics from aqueous systems has not been reported so far to our knowledge. The main obstacle is the high extent of hydrolysis reactions undergone by the starting powders when dispersed in water, hindering the attainment of stable water-based colloidal suspensions. This paper reports on the preparation of stable aqueous inks from a deagglomerated and surface-treated powder synthesized by solid-state reaction and on DIW of macroporous lead-free piezoelectrics. Based on zeta potential and rheological measurements, the optimal amounts of processing additives (dispersant, binder, and coagulating agent) were selected to transform the initial fluid suspension to a viscoelastic paste with sufficient stiffness and stability for the printing process. Dielectric and piezoelectric properties of samples sintered under different temperatures were also investigated.