Fabrication of gap-optimized CMUT

A recently introduced set up of capacitive micromachined ultrasonic transducers (cMUT) combines a conductive membrane above a structured sacrificial layer. All previous approaches either require an additional metallic electrode or do not possess a structured sacrificial layer and, consequently, may make exact adjustment of the membrane dimensions difficult. The present set ups are especially suited for the fabrication of cMUT with gap heights ranging between 50 nm and 2 /spl mu/m between the electrodes. Large gaps are a prerequisite to enabling sufficient deflections of the membrane and, therewith, to generating high pressure gradients. On the other hand, small gap sizes are desirable for detecting weak ultrasonic sources. This paper focuses on the fabrication process of cMUT to realize electrode separation above 500 nm and, in addition, on the manufacturing of cMUT with gaps below 500 nm. The successful realization has been proven by some basic experimental investigations. Finally, the fundamental equations of a frequently chosen simulation model are documented, as a number of ambiguities exist in the common literature.     

Partition coefficients of environmentally important phenols in a supercritical carbon dioxide-water system from cocurrent extraction without analysis of the compressible phase

Partition coefficients of phenol, salicylic acid, and several environmentally important chloro- and nitrophenols in a supercritical CO2-water system were measured using direct cocurrent extraction of aqueous solutions of the individual solutes with CO2. Partitioning data on the nitrophenols and salicylic acid were obtained for the first time. To bypass the troublesome and error-prone analysis of the CO2-rich phase, the present method employed only the solute concentrations in the aqueous phase before and after extraction to determine the partition coefficient. Unlike most previous engineering studies of phenol partitioning in a CO2-water system, the concentrations of phenolic solutes approached infinite dilution in both phases. This makes the results relevant to analytical-scale SFE of environmental water samples with CO2. Because of effective infinite dilution of the solutes, the partition coefficients provide a direct measure of relative CO2-philicity/hydrophilicity of the individual phenols. Compared to the octanol-water partition coefficients of substituted phenols, the CO2-water partition coefficients are more sensitive to substitution in the position neighboring the hydroxyl group.     

Characterization of seasonal variation of forest canopy in a temperate deciduous broadleaf forest, using daily MODIS data

In this paper, we present an improved procedure for collecting no or little atmosphere- and snow-contaminated observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. The resultant time series of daily MODIS data of a temperate deciduous broadleaf forest (the Bartlett Experimental Forest) in 2004 show strong seasonal dynamics of surface reflectance of green, near infrared and shortwave infrared bands, and clearly delineate leaf phenology and length of plant growing season. We also estimate the fractions of photosynthetically active radiation (PAR) absorbed by vegetation canopy (FAPAR_canopy), leaf (FAPAR_leaf), and chlorophyll (FAPAR_chl), respectively, using a coupled leaf-canopy radiative transfer model (PROSAIL-2) and daily MODIS data. The Markov Chain Monte Carlo (MCMC) method (the Metropolis algorithm) is used for model inversion, which provides probability distributions of the retrieved variables. A two-step procedure is used to estimate the fractions of absorbed PAR: (1) to retrieve biophysical and biochemical variables from MODIS images using the PROSAIL-2 model; and (2) to calculate the fractions with the estimated model variables from the first step. Inversion and forward simulations of the PROSAIL-2 model are carried out for the temperate deciduous broadleaf forest during day of year (DOY) 184 to 201 in 2005. The reproduced reflectance values from the PROSAIL-2 model agree well with the observed MODIS reflectance for the five spectral bands (green, red, NIR₁, NIR₂, and SWIR₁). The estimated leaf area index, leaf dry matter, leaf chlorophyll content and FAPAR_canopy values are close to field measurements at the site. The results also showed significant differences between FAPAR_canopy and FAPAR_chl at the site. Our results show that MODIS imagery provides important information on biophysical and biochemical variables at both leaf and canopy levels.     

A biologically inspired active compliant joint using local positive velocity feedback (LPVF).

Starting from studies which revealed that positive feedback is found in the control system for walking in arthropods, we have constructed a new positive feedback driven joint that can be used for solving compliant motion tasks. We propose two different joint constructions each of which shows passive compliance. Based on these joints we introduce three different local positive velocity feedback (LPVF) controllers and discuss their properties in the context of motion generation in closed kinematic chains. The third circuit named undelayed dLPVF is used for the control of a compliant planar manipulator which turns a crank. Our concept is of highly decentralized nature and follows the idea of embodiment. In our case this means that a process which is controlled by LPVF controllers reveals its nature when the controllers interact with this process.     

Model Selection by Predictive Validation

: Gaussian mixture modelling is used to provide a semi-parametric density estimate for a given data set. The fundamental problem with this approach is that the number of mixtures required to adequately describe the data is not known in advance. In our previous work , we described an algorithm, termed Predictive Validation, which attempted to automatically select the number of components. The aim of this paper is to investigate the influence of the various parameters in our model selection method in order to develop it into an operational tool. In this paper, we demonstrate the successful application of model validation to three applications in which the selected models are used for supervised classification, unsupervised classification and outlier detection tasks. Received: 23 Novenber 2000, Received in revised form: 24 April 2001, Accepted: 21 May 2001     

A simple clinical test for differentiating physiological from pathological head lag in full-term newborn infants

The New Doctor paper recently published by the General Medical Council outlines the primarily educational role of preregistration house officers. This article illustrates one innovative way in which this is being implemented simultaneously with a significant service provision, often increasing the standard of patient care.     

Poly(methyl methacrylate) and polyacrylonitrile dispersions stabilized by gelatin

Methyl methacrylate was polymerized in an aqueous medium in the presence of gelatin using potassium persulfate as initiator. The dispersion mode of polymerization, when the monomer is completely miscible with water, was investigated and compared with an emulsion process, which proceeds at higher monomer concentration. Spherical and relatively uniform polymer particles were formed. Macroscopic precipitation of polymer is prevented by combination of the steric stabilization by grafted gelatin and of repulsive electrostatic interactions from the initiator residues attached to the particle surface. Static and dynamic light scattering have been used to determine the molar mass (molar mass of the whole dispersion particle, M_wD ～ 10⁸-10⁹ g mol^?1) and hydrodynamic radius (R_hD ～ 50-120 nm) of the particles. The number of particles per unit volume does not depend on overall monomer concentration, and it is higher, and therefore the particle size is smaller, than that observed for the soapless emulsion polymerization. The addition of gelatin may be thus used to modify the particle size. Acrylonitrile dispersions were prepared under similar conditions. Unlike methyl methacrylate, this monomer does not swell the polymer particles. While poly(methyl methacrylate) particles are spherical and relatively uniform, the polyacrylonitrile dispersions consist of polydisperse aggregates of tiny polymer particles.