基于“CDIO”的“1+2”新教学模式研究

“CDIO”教学是将工程思维训练融合在教学各个环节当中,本文采用“CDIO”与“案例教学、启发教学”进行融合,组合成为一个新的“1+2”教学模式,以医学信息工程学院课程作为应用载体,将传统教学升华到工程思维教学、团队教学上,转变教师授课形式,激励和引导学生自主学习,为学生提供思维的空间和意境,帮助学生在学习时发现问题,发现、解决值得解决的问题,掌握计算在问题解决过程中发挥的作用,获得构建自身学科知识体系,终身自我学习的能力,滋生创新能力,达到学科知识与工程思维能力互相促进,共同提高的目的。     

基于多通道分离整合的多尺度单幅图像去雨算法

由于密度不同的雨对图像造成的遮挡不同,图像去雨一直都是一项极具挑战性的任务。目前,基于深度学习的图像去雨算法已经成为主流。然而,多数深度学习的架构都是通过堆叠卷积层来设计的,执行去雨任务后图像仍存在着大小不一的雨痕,这些方法并不能很好地关注训练中雨图的局部信息和上下文信息。为了解决上述问题,本文设计一种基于多通道分离整合的卷积神经网络用于图像去雨。第一步通过通道分离,再利用卷积层间的层级连接,构成多尺度模块,最终将不同通道的输出进行整合。该模块可以增大感受野,探索特征图之间的空间信息,更好地提取特征。第二步利用渐进网络来反复计算挖掘上下文信息,能够很好关联到全局特征。整体模型易于实施,可以端对端训练。在常用的数据集以及自建的自动驾驶雨天数据集上的大量实验表明,本文方法比现有方法取得了明显的改进。     

计量用低速风洞结构参数仿真研究

为准确分析风洞结构参数对所产生的风场稳定性的影响规律,以现有低速风洞为蓝本,通过改变其试验段结构参数建立多个不同参数试验模型;采用ansys CFD对建立的多个新模型进行结构流体仿真,对仿真结果进行数据拟合,找出风洞收缩段曲线结构参数变化对试验段轴向风速梯度和法向风速均匀性的影响;仿真实验结果表明,试验段法向中心面的有效试验区的均匀性系数随着收缩段长度增加而减小,到一定程度趋于稳定,风洞模型在L＞ 23 cm后风场均匀性系数基本处于稳定,试验段前半段的风速轴向梯度明显大于后半段的风速轴向梯度,有效试验区域多集中在后半段,风洞模型中轴向有效试验区域x＞(10～15) cm,可以为风洞的设计提供可靠参考.     

应用于光伏发电系统的辐照度传感器选型及计量误差分析

对光伏电池材料的研究从室内过渡到室外。在室外评价体系中,太阳辐照度是最重要的环境参数。对热电堆类型传感器及标准电池类型太阳辐照度传感器进行选型分析,阐述这两类传感器在光伏系统中的各自应用特点及计量传递过程中误差来源,并对标准电池的计量方法进行分析论证。     

库车山前致密砂岩储层深度伤害后改造措施探究

对深度伤害的致密砂岩储层,先后尝试了酸压、重晶石解堵和加砂压裂3种改造措施。研究表明,酸压改造不能突破深度污染带,不能恢复气井产能;重晶石解堵作业只针对储层的重晶石堵塞有用,但作用能力和范围有限;加砂压裂能突破深度污染带,沟通远端天然裂缝,使气井恢复产能,压裂后日产气20.4×10~4m~3。     

In situ study of the mechanical properties of airborne haze particles

Particulate pollution has raised serious concerns regarding its potential impacts on human health in developing countries. However, much less attention has been paid to the threat of haze particles to machinery and industry. By employing a state-of-the-art in situ scanning electron microscope compression testing technique, we demonstrate that iron-rich and fly ash haze particles, which account for nearly 70% of the total micron-sized spherical haze particles, are strong enough to generate abrasive damage to most engineering alloys, and therefore can generate significant scratch damage to moving contacting surfaces in high precision machineries. Our finding calls for preventive measures to protect against haze related threat.     

Effect of particle size on flame retardancy and mechanical properties of hydroxyethyl diphosphate modified aluminum hydroxide intrinsic polyethylene terephthalate

Organic–inorganic hybrid flame retardant was obtained by modifying aluminum hydroxide with different particle size with 1-hydroxyethylidene-1,1-diphosphonic acid. The structure of the organic–inorganic hybrid flame retardant is characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy, while ¹H-NMR spectroscopy only characterizes specific samples. The thermal stability and flame retardancy of the samples were analyzed by thermogravimetric analysis, limiting oxygen index (LOI), vertical combustion of UL-94 and cone calorimeter. The results show that the modified 10 μm aluminum hydroxide has a better effect than the 25 μm aluminum hydroxide and 100 nm aluminum hydroxide. Compared with pure polyethylene terephthalate (PET), the LOI value of the best sample is increased by 24.4%, and UL-94 V reaches V-0 level. Heat release rate, total heat release rate, and carbon monoxide production rate decreased by 45.8%, 33.2%, and 41.5%, respectively, compared to pure PET. The results showed that the aluminum hydroxide with a particle size of 10 μm exhibited the best flame retardant effect, which could be attributed to the decomposition of organic phosphoric acid and the dehydration of aluminum hydroxide, yielding a higher amount of residual carbon.     

Binary polymer blend of ArPTU/PI with advanced comprehensive dielectric properties and ultra-high thermally stability

Flexible high-temperature polymeric dielectrics with advanced dielectric properties are urgently demanded in various applications. In this work, series of polymer blend films were prepared from aromatic polythiourea (ArPTU) and polyimide (PI). The experimental results revealed that the blend films were properly engineered to achieve higher breakdown strength, greater dielectric constant, and larger energy density than pure PI film. For instance, the optimum property was obtained from the blend film with 10 wt% ArPTU, exhibiting prominent dielectric properties (K = 4.52, E_b = 443 MV/m), enhanced energy density (4.00 J/cm³) as well as excellent heat resistance (T_g = 419°C). In addition, stable dielectric properties at broad temperature range from −50 to 250°C were also acquired. It is deduced that the good compatibility from ArPTU and PI with similar polarity are responsible for the improved properties. The superior comprehensive properties which combine the advantages of ArPTU and PI suggest the potential applications of ArPTU/PI blend film in high-temperature dielectric areas.     

Influence of deposited amine-functionalized Si-MCM-41 in polyacrylonitrile electrospun membranes applied for separation of water in oil emulsions

Among several oil/water emulsion separation technologies, the utilization of nanoparticle-decorated membranes with diverse functionalities has received considerable attention in recent years, particularly if the antifouling capacity can be improved. In this article, we propose a new membrane based on surface-hydrolyzed polyacrylonitrile electrospun membranes and/or decorated with amine-functionalized Si-MCM-41 nanoparticles to be used as oil/water emulsion separation treatment and to determine their antifouling ability. X-Ray photoelectron spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy, and toluidine blue O assay, scanning electron microscopy, contact angle measurements for oil under water and thermogravimetry were used for characterizing the membranes and an assay of permeability was developed to quantify the diffusion of oil molecules across the electrospun membrane. The electrospun and/or decorated membranes showed an underwater oleophobic wettability, which can separate oil-in-water emulsions with 87% separation efficiency, results of fouling experiments, evaluated in terms of rejection and flux recovery ratio, exhibited good antifouling ability, but the membrane decoration process did not lead to superior outcomes compared with undecorated membranes.     

基于ProCAST的消失模铸造工艺的数值模拟研究

运用ProAST软件对链轮铸钢件的消失模铸造工艺进行了充型和凝固过程的数值模拟评价,分析了缺陷产生的原因,对铸造工艺进行了优化,并结合实际生产情况,给出了影响消失模铸造的六大基本因素。