Effect of Shot Peening Parameters to Residual Stress Profiles and Barkhausen Noise

The production of gear components includes numerous manufacturing operations which are carried out to ensure proper surface characteristics of components to deal with wear and fatigue. Surface shot peening is one way to increase the compressive residual stresses on the surface and thus ensure better wear and fatigue resistance. An experimental plan for shot peening was conducted to produce samples with varying surface characteristics. Residual stress profile and Barkhausen noise measurements were carried out for the samples. The objective of the study was to evaluate the interactions between the shot peening parameters studied, the residual stress profiles and the Barkhausen noise measurements. A multivariable regression analysis was applied for the task. Some remarkable correlations were found between the shot peening parameters, residual stress profile and Barkhausen noise features. The most important finding was that when the shot peening intensity was high enough, over 0.5 mmA, it dominated the shot peening coverage density parameter and thus no correlations could be gained. On the other hand, if the intensity parameter was lower than the limit of 0.5 mmA, the correlation between residual stress and Barkhausen noise measurements was remarkable. This means that the surface Barkhausen noise measurements could be used for the evaluation of the stress gradient in the shot peening process.     

Embrittlement Analysis of $$\sum {{{{5}\left[ {{21}0} \right]} \mathord{\left/ {\vphantom {{{5}\left[ {{21}0} \right]} {\left( {\overline{1}\overline{2}0} \right)}}} \right. \kern-\nulldelimiterspace} {\left( {-{1}-{2}0} \right)}}}$$ FeAl Grain Boundary in Presence of Defects: An Ab Initio Study

Iron aluminide (FeAl) inter-metallic compounds are potential candidates for structural applications at high temperatures owing to their superior corrosion resistance, high temperature oxidation, low density and inexpensive material cost. However, the presence of defects can lead to reduction in the strength and ductility of FeAl-based materials. Here we present a density functional theory (DFT) study of the effect of the presence of defects including Fe and Al vacancies as well as H dopants at the substitutional and interstitial sites at a \(\sum {{{{5}\left[ {{21}0} \right]} \mathord{\left/ {\vphantom {{{5}\left[ {{21}0} \right]} {\left( {\overline{1}\overline{2}0} \right)}}} \right. \kern-\nulldelimiterspace} {\left( {\overline{1}\overline{2}0} \right)}}}\) FeAl grain boundary focusing on the energetics. The plane wave pseudopotential code Vienna Ab initio Simulation Package (VASP) in the generalized gradient approximation (GGA) is used to carry out the computations. The formation energy calculations showed that intrinsic defects such as Fe and Al vacancies probably form at the GB, indicated by their negative formation energies. These vacancies can further form defect complexes with H impurities, indicated by lowered formation energies, compact bonds and charge gain of H atoms. Electronic structure analysis showed stronger hybridization of 1s orbitals of H with Fe and Al atoms, which leads to the stabilization of these defects resulting in degradation of material strength.

     

Syntax-directed compression of program files

Parsing can be applied to compress source programs. A suitably encoded parse tree, together with the symbol table, constitutes a very compact representation of the program. The paper reports a Prolog implementation of the method, including automatic, syntax-directed, encoder and decoder generators. The test results show compression gains of 50–60 per cent.     

Estimation in mixed models via layer triangular transformation

A new alternative for estimating parameters in some mixed linear models is presented and illustrated. The approach is based on the same layer triangular transformation of the model matrix as proposed earlier by Öfversten (Biometrics 49 (1993)) for the derivation of some exact tests for variance components. Using the same preliminary transformation for both testing and estimation gives us an integrated set of procedures for the full analysis of some widely used mixed linear models. The proposed procedures are computationally stable and space saving.     

SQUID magnetometers for low-frequency applications

We present a novel formulation for SQUID operation, which enables us to evaluate and compare the sensitivity and applicability of different devices. SQUID magnetometers for low-frequency applications are analyzed, taking into account the coupling circuits and electronics. We discuss nonhysteretic and hysteretic single-junction rf SQUIDs, but the main emphasis is on the dynamics, sensitivity, and coupling considerations of dc-SQUID magnetometers. A short review of current ideas on thin-film, dc-SQUID design presents the problems in coupling and the basic limits of sensitivity. The fabrication technology of tunnel-junction devices is discussed with emphasis on how it limits critical current densities, specific capacitances of junctions, minimum linewidths, conductor separations, etc. Properties of high-temperature superconductors are evaluated on the basis of recently published results on increased flux creep, low density of current carriers, and problems in fabricating reliable junctions. The optimization of electronics for different types of SQUIDs is presented. Finally, the most important low-frequency applications of SQUIDs in biomagnetism, metrology, geomagnetism, and some physics experiments demonstrate the various possibilities that state-of-the-art SQUIDs can provide.     

User level performance analysis of multi-hop in-band backhaul for 5G

In recent years, mobile access networks operating at millimeter wavelengths have received a great deal of attention, as they promise previously unattainably high mobile data rates. At these frequencies, mobile access links are expected to use highly directional beamforming antennas, which are also well suited to backhaul links. Therefore, access points can efficiently act as self-backhauled relays by using the same spectrum, circuits and antennas for mobile access and backhaul links, thus forming a multi-hop in-band backhaul network. The contributions of our paper are extensive simulations to investigate user level performance in such multi-hop networks. We specifically take into account the momentary data traffic of every link in order to calculate the interference. Results quantify the detrimental effect of interference on user level performance. Furthermore, the potential benefit of using the combination of in-band and dedicated backhaul links is evaluated. Additionally, this paper investigates the user level effects of the sudden loss of a link in the backhaul mesh network, and underlines the importance of effective rerouting algorithms. The feasibility of the in-band concept is demonstrated, and we can confirm that the user level experience will surpass the performance provided by previous generation mobile networks.     

Achieving agility using business model stress testing

Business Model (BM) Innovations aim at making systemic changes in the business logic of companies when they are bringing innovative products and services to the market. Companies should be sensitive to changes in their business environment and able to modify their BMs in an agile way. To assess the agility of BMI during specific market entry situations, this paper uses a method that stress tests the value proposition and the components of a BM against contingent uncertainties. We present three qualitative case studies of companies that differ in their market entry approach. Starting from their strategic orientation, these case companies’ stress test their Business models and BM components, using a scenario-based identification of uncertainties. The BM Stress Test method contributes to a quick understanding of the components their BM needs to monitor, reconsider, or improve. Such stress testing helps enhance business agility. The research contributes to market strategy and business modelling research by introducing BM Stress Testing as a new method that can achieve and maintain agility regarding BM uncertainties.     

Energy efficiency of dynamic management of virtual cluster with heterogeneous hardware

Cloud computing is an essential part of today’s computing world. Continuously increasing amount of computation with varying resource requirements is placed in large data centers. The variation among computing tasks, both in their resource requirements and time of processing, makes it possible to optimize the usage of physical hardware by applying cloud technologies. In this work, we develop a prototype system for load-based management of virtual machines in an OpenStack computing cluster. Our prototype is based on an idea of ‘packing’ idle virtual machines into special park servers optimized for this purpose. We evaluate the method by running real high-energy physics analysis software in an OpenStack test cluster and by simulating the same principle using the Cloudsim simulator software. The results show a clear improvement, 9–48 % , in the total energy efficiency when using our method together with resource overbooking and heterogeneous hardware.     

Compatibilization of Poly(propylene)/Polyamide 6 Blends with Functionalized Poly(propylene)s Prepared with Metallocene Catalyst

Summary: Propylene was copolymerized with 10‐undecen‐1‐ol using dimethylsilanylbis(2‐methyl‐4‐phenyl‐1‐indenyl)zirconium dichloride as catalyst and MAO and TIBA as cocatalysts. Comonomer incorporations from 0.1 to 0.9 mol‐% (0.5 to 3.6 wt.‐%) were obtained. These hydroxyl functionalized copolymers were applied as compatibilizers to PP/PA6 blend with a composition of 70/30. For comparison, hydroxyl functionalized polyethylene prepared with metallocene catalyst and commercial MAH grafted ethylene butyl acrylate (E/BA/MAH) and poly(propylene) (PP‐g‐MAH) were also used as compatibilizers. Effects of the compatibilizers on morphology and mechanical and thermal properties of the blends were studied. Enhanced adhesion between the blend components was observed in morphology and dynamic mechanical studies. Although improvement in toughness was not as pronounced as expected, there were indications that the hydroxyl functionalized propylene copolymers prepared with metallocene catalysts could serve as a new type of compatibilizer in polymer blends.

SEM micrograph (5 000×) of an PP/PA6/PP‐co‐OH4 blend.