Creep Properties of 9Cr and 14Cr ODS Tubes Tested by Inner Gas Pressure

Oxide-dispersion strengthened steels are promising materials for extreme service conditions including nuclear reactors core. In service conditions, nuclear fuel claddings are exposed to the fission gas pressure at temperatures about 700 °C. This paper presents novel results on ODS creep properties from a round robin of inner gas pressure creep test. A gas pressure creep test, simulating fission gas loading, was designed and achieved by four different European teams. Lifetime and specific behavior of ODS steel tube are prospected. Based on a mechanical clamping achieving gas tightness, short length tubes samples are tested by different laboratories. In situ laser measurements exhibit the radial expansion of ODS steel tubes before failure. Post-mortem, geometrical characterizations are performed to determine hoop strains at failure. A consistent creep lifetime is observed by all the teams even with slightly different testing apparatus and clamping systems. Under inner gas pressure, ODS steels exhibit a typical failure by leakage associated to a very small radial expansion. This behavior results from a brutal failure (burst) without evidence of tertiary creep stage. This failure mode of ODS cladding in creep conditions is consistently observed on all samples of the study. Inner gas pressure creep tests were compared, for the first time, by four European laboratories on ODS steel tube. This technique, simulating the fission gas pressure loading, is applied on small and mechanically clamped samples. This technique shows a remarkable consistency between the different laboratories results and demonstrates to be efficient for ODS steel cladding tube qualification. The results show a correlation between the creep properties and the microstructure.

     

Light transmission model for determination of the refractive index of solid particles in suspensions: an immersion study

We report on a model to determine the light transmission of solid particles in immersion liquids. Using the model, optical and physical properties of suspensions such as the refractive index of the particles can be retrieved. The model can also be used in the case of colored suspensions, where the detection of only the maximum transmission would give an inaccurate refractive index for a particle. The validity of the method was tested with CaF(2) particles. Potential applications include scientific studies of the optical properties of micro- and nanoparticles or microorganisms in a liquid matrix. The model is also useful in industry where monitoring of suspensions and colloids is an issue.     

Visualization of a pharmaceutical unit operation: wet granulation

Recent developments in the field of process engineering and manufacturing sciences enable a new level of process understanding. However, extracting this understanding from increasing amounts of information is challenging. The aim of this study was to create a process vector from a model process describing all relevant information and, by that means, create a tool for combining and visualizing this information. Physical (impeller torque and temperature) and chemical (near-infrared spectroscopy) information from a small-scale high-shear granulation was used in the process vector. The vectors created were visualized by two different methods: principal component analysis (PCA) and the self-organizing map (SOM). None of the individual measurement techniques were able to describe the state of the process alone, although they provided important information about the process. By combining the data and visualizing it, an overview could be achieved. The SOM approach had two advantages over the PCA: it presented the results in terms of the original variables and enabled the analysis of nonlinear responses. However, both visualization methods could be used to describe the progress of the process and to increase the level of process understanding.     

Reading long words embedded in sentences: Informativeness of word halves affects eye movements.

The possibility was explored that the informativeness of a specific region within a word can influence eye movements during reading. In Experiment 1, words containing identifying information either toward the beginning or toward the end were displayed asymmetrically around the point of fixation so that the reader was initially presented with either the informative or noninformative zone. Words were read with shorter summed initial fixation time when the reading was started from the informative zone. In Experiments 2 and 3, the target words were presented in sentences that were to be comprehended. More attention was given to the informative endings of words than to redundant endings. The latter were also skipped more often. The duration of the first fixation was not affected by information distribution within the word, whereas the second fixation duration was. The results of these experiments lend good support to the hypothesis of immediate lexical control over fixation behavior and to the notion of a convenient viewing position. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A meta-analytic review of the preventive treatment of recurrences of febrile seizures

OBJECTIVE: To assess the efficacy of various medications in the prevention of recurrent febrile seizures. STUDY DESIGN: A meta-analysis of all published randomized, placebo-controlled trials of the preventive treatment of febrile seizures published in English; 45 articles were found, but only 9 trials were randomized and placebo-controlled--4 using phenobarbital; 3, diazepam; 1, pyridoxine; and 1, phenytoin. In one of the phenobarbital trials, valproate was also compared with placebo. RESULTS: The risk of recurrences was significantly lower in children receiving continuous phenobarbital therapy than placebo (odds ratio 0.54, 95% confidence intervals 0.33 to 0.90, p = 0.017). The odds ratio for recurrences in the valproate group was 0.09, 95% CI 0.01 to 0.78, p = 0.011. No difference in the risk was found for recurrences between children receiving intermittent diazepam and placebo (odds ratio 0.81, 95% CI 0.54 to 1.22, p = 0.31). The risk for recurrences in children receiving pyridoxine or phenytoin did not differ from the risk among children receiving placebo. Four children would have to be treated with valproate (95% CI 2 to 11) or eight children would have to be treated with phenobarbital (95% CI 5 to 27), continuously, to prevent one febrile seizure. CONCLUSIONS: Because both agents found to be effective in prevention of recurrent febrile seizures have known adverse effects, prophylaxis of febrile seizures cannot be recommended.     

Syntax-directed compression of program files

Parsing can be applied to compress source programs. A suitably encoded parse tree, together with the symbol table, constitutes a very compact representation of the program. The paper reports a Prolog implementation of the method, including automatic, syntax-directed, encoder and decoder generators. The test results show compression gains of 50–60 per cent.     

Estimation in mixed models via layer triangular transformation

A new alternative for estimating parameters in some mixed linear models is presented and illustrated. The approach is based on the same layer triangular transformation of the model matrix as proposed earlier by Öfversten (Biometrics 49 (1993)) for the derivation of some exact tests for variance components. Using the same preliminary transformation for both testing and estimation gives us an integrated set of procedures for the full analysis of some widely used mixed linear models. The proposed procedures are computationally stable and space saving.     

Readout methods for an inductively coupled resonance sensor used in pressure garment application

The methods needed to inductively read a passive resonance sensor in pressure measurement are studied. A simple dual-layer pressure sensor, a small portable phase response measurement unit and the methods to extract a coupling coefficient compensated resonance frequency are presented. The functionality and accuracy of the measurement are tested in a test rig and demonstrated in a realistic measurement environment. According to the test measurements, the overall performance of this wireless system is promising and the accuracy is within the typical range of the measurements made in the field of pressure garments.     

Authentication of Particulate Air Samples by Aerosol

A method was developed for the protection of aerosol filters against tampering that can be applied to any particulate sampler. In this method, tagged particles are dispersed into the sampled aerosol volume by liquid atomization to guarantee homogeneous distribution of the tag and deposition into the filter matrix. The tagged aerosols are collected insitu, together with the sampled dust particles. The tag can be measured in different ways. This feature can be used for self protection of the method. The authentication of the individual filters is preserved through the lifetime of the filter sample. Long-term field tests of the equipment indicate reliable performance.