面向对象中文窗口开发环境：C—VISION

Ｃ－ＶＩＳＩＯＮ中文窗口系统综合采用了面向对象与窗口环境设计的程序方法，彻底更新了在微机上进行中文窗口设计的编程思想，同时作为一个基础系统，为软件设计节约了大量的人力和时间，实现了微机程序的共享。     

PAA-PSF交联复合膜的制备及对低浓度有机醇水溶液反渗透分离性能研究

进行了ＰＡＡ（ＰｏｌｙａｃｒｙｌｉｃＡｃｉｄ）－ＰＳＦ（Ｐｏｌｙｓｕｌｆｏｎｅ）交联复合膜的制备，研究了交联剂、添加剂对膜性能的影响，并通过扫描电镜观察了膜的断面结构．研究了ＰＡＡ－ＰＳＦ交联复合膜对低浓度有机醇类水溶液反渗透分离性能．发现对于１０００×１０－６乙醇水溶液截留率达到６６．２％，透过流束可达０．９×１０－６（ｍ３·ｍ－２·ｓ－１）．随醇的分子量的增加，截留率不断上升，对戊醇的截留率达９４．３％，而透过流束则保持相对稳定．对不同结构醇类的分离性能研究表明，截留率存在有：ｔｅｒｔ－＞ｓｅｃ－＞ｉｓｏ－＞ｎ－的规律．     

蒙特卡罗方法在空间辐射制冷器理论分析及热设计计算中的应用

介绍了二级抛物面型辐射制冷器的热物理模型及用蒙特卡罗方法数值模拟解决其热流理论和辐射热耦合表面（漫发射、镜反射）辐射热交换的处理方法。     

Self-aligned offset gated poly-Si TFTs with a floating sub-gate

We have fabricated a self-aligned offset-gated poly-Si thin film transistor (TFT) by employing a novel photoresist reflow process. The gate structure of the new device is consisted of two unique patterns: A main-gate and a sub-gate. The new fabrication method extends the gate-oxide over the offset region. With the assistance of the sub-gate and reflowed photoresist a self-aligned offset region is successfully obtained due to the offset oxide acting as an implantation mask. The poly-Si TFT with symmetrical offsets is easily fabricated and the new method does not require any additional offset mask step. Compared with the misaligned offset gated poly-Si TFTs, excellent symmetric electrical characteristics are obtained     

SHS法陶瓷衬管的研究现状及应用前景

回顾了自蔓延高温合成陶瓷衬管的发展历史，对国内外的研究现状进行归纳总结，介绍了离心ＳＨＳ法生产陶瓷衬管的工艺特点及产品性能，展望了离心ＳＨＳ陶瓷衬管的应用前景。     

Ovarian mucinous cystadenocarcinoma with mural nodules of anaplastic carcinoma: report of a case and review of the literature

A decline of cytosol protein kinase C activity was observed in rat myocardial cells at 4 and 8 h after endotoxin administration, and membrane-associated protein kinase C activity rose at the same time. The activity of membrane protein kinase C in aortic smooth muscle cells at 0.5 and 4 h after endotoxin injection was higher than that in control, while cytosol protein kinase C activity was lower. The results indicate that protein kinase C was activated in myocardial cells and aortic smooth muscle cells during various phases of endotoxemia.     

齿轮磨前滚刀的齿形研究

本文介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算,并建立了数学模型。为更加直观起见,还建立了模拟滚齿的数学模型。并在实验的基础上提出了参考标准。     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。     

高频脉冲电铸Ni-Co纳米复合块体微观结构分析

采用高频脉冲电铸工艺制备出了镍钴纳米复合块体材料，利用场发射扫描电镜、能谱和X射线衍射的方法，重点研究了复合块体沉积层的表面形貌、相结构和结晶取向。结果表明．高频率和润湿剂的添加对沉积层的细化有重要影响，高频脉冲电铸能够获得微观组织致密、均匀的复合块体材料。     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.