Catkin liked nano-Co3O4 catalyst built-in organic microreactor by PEMOCVD method for trace CO oxidation at room temperature

In this paper, tricobalt tetraoxide (Co₃O₄) catalyst was coated on the polydimethylsiloxane microchannel by the plasma-enhanced metal-organic chemical vapor deposition technology. The obtained Co₃O₄ film was characterized by SEM, XRD, XPS, and TEM, and the results show that the as-deposited Co₃O₄ film was initially composed of many cauliflowers-shaped microclusters. Also, the microcauliflower was transformed from an amorphous phase to a crystal phase when the Co₃O₄ film was treated by Ar and O₂ plasma for more than 20 min, and the crystal lattice line occurred on the surface of nano-sized-Co₃O₄ particles. Meanwhile, the interface of Co₃O₄ particles with diameter between 3 and 12 nm became obvious and some nano-catkin structures were also formed on the Co₃O₄ film. The ratio of Co³⁺/Co²⁺ in the spinel-type Co₃O₄ was nearly 2, and the nano-particles predominantly expose their {311}, {111}, and {220} planes. These morphologies and structure characteristics were found to be ideal for increasing the catalytic activity efficiency of Co₃O₄ for CO oxidation, and the catalytic stability of Co₃O₄ coated on the organic microreactor lasted nearly 85 h for trace CO oxidation at room temperature.     

Design methodology of piezoelectric energy-harvesting skin using topology optimization

This paper describes a design methodology for piezoelectric energy harvesters that thinly encapsulate the mechanical devices and exploit resonances from higher-order vibrational modes. The direction of polarization determines the sign of the piezoelectric tensor to avoid cancellations of electric fields from opposite polarizations in the same circuit. The resultant modified equations of state are solved by finite element method (FEM). Combining this method with the solid isotropic material with penalization (SIMP) method for piezoelectric material, we have developed an optimization methodology that optimizes the piezoelectric material layout and polarization direction. Updating the density function of the SIMP method is performed based on sensitivity analysis, the sequential linear programming on the early stage of the optimization, and the phase field method on the latter stage of the optimization to obtain clear optimal shapes without intermediate density. Numerical examples are provided that illustrate the validity and utility of the proposed method.     

Variability for oil and fatty acid composition in castorbean varieties

Thirty-six castorbean varieties were surveyed for oil and fatty acid composition, in order to determine variability of these seed compounds. A large variability of seed oil percentage was observed, ranging from 39.6 to 59.5%. Concerning the fatty acids, little variability was observed for ricinoleic acid, which was the most abundant in the oil, ranging from 83.65 to 90.00%. The other fatty acids appeared in small concentrations and showed a small range: 0.87 to 2.35, 0.68 to 1.84, 2.96 to 5.64, 3.19 to 5.98, and 0.34 to 0.91%, for palmitic, stearic, oleic, linoleic, and linolenic acid, respectively. Non-significant correlations were observed between fatty acids and seed oil percentage. However, significant correlations were observed among fatty acid concentrations: positive and negative ones. These significant correlations could be associated with the biosynthetic pathways of the fatty acids, which are not fully elucidated. They suggest, however, that selection for a particular fatty acid will tend to increase those positively correlated, and decrease those negative ones. Selection and plant breeding techniques could then be applied to modify the oil content of the castorbean seeds, considering the variability observed. For the fatty acid composition, however, the variability was not large enough to make substantial changes in their concentrations by selection procedures. More varieties should be surveyed to find out if such variability is available.     

The Influence of the Acid Sites on the Methylamines Synthesis with Cu-HZSM-5 Zeolite

There is a high industrial demand for MMA and DMA, however, the production of TMA is favored with the commercial catalysts. This work tested the methanol amination reaction with HZSM-5 and Cu/HZSM-5 zeolites (%Cu = 1.2, 3.7 and 6.0). Regarding the MMA selectivity, light differences were observed among Cu/HZSM-5 catalysts and pure zeolite, although the catalysts containing 3.7% copper was slightly more selective to MMA than the other metallic catalysts studied. From these results it is suggested that the metal loading present in the catalysts leads to a modification in the nature of the acidic sites, in particular, the selectivity depends on ratio Brönsted/Lewis acid sites. This modifications would facilitate the amines desorption during the reaction.     

The metabolism of 1-acyl-PAF in rabbit platelets and its possible interaction with PAF

The metabolism of 1-acyl-2-acetyl-sn-glycero-3-phosphocholine (1-acyl-PAF), a naturally occurring analogue of platelet activating factor (PAF), was investigated in rabbit platelets. Our studies showed that 1-acyl-[³H]PAF (1-palmitoyl-2-acetyl-sn-glycero-3-phospho[N-methyl-³H]-choline) was converted by platelets into phosphatidyl-[³H]choline ([³H]PC) in a time-dependent fashion. The formation of [³H]PC occurred at a rate similar to that observed when lyso-[³H]PC (palmitoyl-sn-glycero-3-phospho[N-methyl-³H]choline) was used as substrate. In addition, a time-dependent increase in the level of water-soluble radioactivity was observed during the incubation of platelets with either 1-acyl-[³H]PAF or lyso-[³H]PC. This increase was parallel to the formation of [³H]PC and was not observed in the presence of [¹⁴C]PAF (1-octadecyl-2-acetyl-sn-glycerol-3-phospho[N methyl-¹⁴C]choline). Analysis by thin-layer chromatography showed that the soluble radioactivity was mainly associated with glycerophosphocholine (GPC). On the other hand, the preincubation of platelets with phenylmethylsulfonyl fluoride, an inhibitor of the acetylhydrolase, reduced the hydrolysis of 1-acyl-[³H]PAF to [³H]GPC with a concomitant accumulation of radioactivity in 1-acyl-PAF. These findings suggest that 1-acyl-PAF is converted into PC through deacetylation-reacylation with lysoPC as an obligatory intermediate. The findings also indicate that the lysoPC resulting from 1-acyl-PAF is either reacylated to phosphatidylcholine (PC) or hydrolyzed to GPC by lysophospholipase. Finally, we showed that the stimulation of platelets with PAF led to a time- and concentration-dependent increase in the conversion of 1-acyl-[³H]PAF to [³H]PC. The stimulatory effect of PAF was not observed when platelets were lysed before incubation, suggesting that PAF enhances the metabolism of 1-acyl-PAF, probably by accelerating its translocation through the plasma membrane.     

Wearable cognitive assistants in a factory setting: a critical review of a promising way of enhancing cognitive performance and well-being

Cognition, Technology & Work - Rapid technological innovations are constantly influencing the complexification and automatization of the work lines pushing human operators to use diverse...     

Computational Decision Support System for ADHD Identification

Machine Intelligence Research - Attention deficit/hyperactivity disorder (ADHD) is a common disorder among children. ADHD often prevails into adulthood, unless proper treatments are facilitated to...     

Sense representations for Portuguese: experiments with sense embeddings and deep neural language models

Sense representations have gone beyond word representations like Word2Vec, GloVe and FastText and achieved innovative performance on a wide range of natural language processing tasks. Although very useful in many applications, the traditional approaches for generating word embeddings have a strict drawback: they produce a single vector representation for a given word ignoring the fact that ambiguous words can assume different meanings. In this paper, we explore unsupervised sense representations which, different from traditional word embeddings, are able to induce different senses of a word by analyzing its contextual semantics in a text. The unsupervised sense representations investigated in this paper are: sense embeddings and deep neural language models. We present the first experiments carried out for generating sense embeddings for Portuguese. Our experiments show that the sense embedding model (Sense2vec) outperformed traditional word embeddings in syntactic and semantic analogies task, proving that the language resource generated here can improve the performance of NLP tasks in Portuguese. We also evaluated the performance of pre-trained deep neural language models (ELMo and BERT) in two transfer learning approaches: feature based and fine-tuning, in the semantic textual similarity task. Our experiments indicate that the fine tuned Multilingual and Portuguese BERT language models were able to achieve better accuracy than the ELMo model and baselines.

     

An International Collaborative Study on Trypsin Inhibitor Assay for Legumes,Cereals, and Related Products

For determining trypsin inhibitor activity (TIA) in soy products, the American Oil Chemists' Society (AOCS) Method Ba 12-75 has been used. It measures differences in absorbance at 410 nm of bovine trypsin activity toward a synthetic substrate (Nα-benzoyl-DL-arginine-p-nitroanilide) in the absence and presence of an inhibitor. Recently, a significantly improved method was developed (JAOCS, 2019, 96:635–645), featuring 5 mL of total assay volume, enzyme-last sequence, and single inhibitor level in duplicate. It is proposed as the AOCS Method Ba 12a-2020. As a part of the AOCS method approval process, a collaborative study involving 12 international laboratories was conducted to evaluate the performance of the proposed method. The study involved measuring TIA in 10 selected test samples plus a blind duplicate. They included soybeans, pulses, cereals, and their processed products (flours, concentrates, and isolates). After rigorous statistical treatment of the data, only three outliers were removed from the data of two samples. Repeatability relative standard deviations (RSDr) for the 11 samples ranged from 0.99% to 5.52%. Reproducibility RSD (RSD_R) ranged from 7.07% to 22.92%, with seven samples having RSD_R around 10% or less. The remaining four samples had very low TIA, and their RSD_R values ranged from 13.34% to 22.92%. The study has demonstrated reliable performance of the proposed AOCS method. Several collaborators carried out additional experiments addressing some aspects of the method, leading to further refinements. The proposed method is undergoing evaluation by the AOCS Uniform Methods Committee for adoption as an Official Method for measuring TIA in various legume and grain products.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.