����������Ͳ�¶ȷֲ�����

凝析气井井筒温度分布是进行气井节点分析和动态分析必不可少的参数。根据传热学原理推出了凝析气井井筒温度分布计算公式，研究了温度计算基础数据求取方法，分析了产气量、产水量、井深及油管直径对井口温度的影响规律。对某一井深为５４００ｍ的凝析气井进行了计算，该气井气油比为３０００，含２３％的Ｈ２Ｓ和４％的Ｎ２；地层温度为１３４℃。计算结果表明：井口实测温度与计算温度的相对误差为０２％～３８％，符合工程精度。气井温度随井深不呈线性分布；气井井口温度随产量、井深增加而增加，随油管直径减少而减少；该公式同时适用于干气井、湿气井和凝析气井的温度分布计算，计算精度符合工程精度要求。     

提高超小型铝电解电容器生产一次合格率

恰当选择原材料、确保铆接工序质量、重视工作电解液的配比、严控各工序成品率是提高超小型铝电解电容器投入产出一次合格率的关键。以１０Ｖ－４７μＦ（４ｍｍ×７ｍｍ）产品为例，投入产出一次合格率达９４％以上。     

Bone SPECT of the jaws after fracture, onlay osteoplasty of insertion of implants

AIM: The aim of this study was early differentiation between uncomplicated and complicated processes of healing in the jaw using bone SPECT. METHODS: Investigations were performed in 40 mandibular fractures and 26 jaws after onlay osteoplasty as well as secondary insertion of implants. Bone SPECT was carried out within 1-2 months and after approximately 4-5 months. The uptake in the jaw was assessed semi-quantitatively using ROI analysis. RESULTS: Fractures with uncomplicated healing showed a decrease of uptake in follow-up, whereas fractures with an infection in the later course showed an increase, resulting in a significantly higher uptake at the follow-up investigation for the latter group. 1-2 months after onlay osteoplasty significantly lower uptake was found in regions with later occurrence of sequestration. In regions with implants in which osseointegration failed, there was significant reduction of uptake initially and significant elevation at the follow-up investigation. CONCLUSION: These results indicate a prognostic relevance of bone SPECT in the evaluation of processes of healing in the jaw.     

直流电动机参数测定

根据直流电机的可逆原理并利用常规的实验仪表，可以简便、准确地测出直流电动机的主要参数－电磁转矩、输出转矩和效率．     

复合栅控二极管新技术提取热载流子诱生的NMOS/SOI器件界面陷阱的横向分布

提出了用复合栅控二极管新技术提取MOS/SOI器件界面陷阱沿沟道横向分布的原理,给出了具体的测试步骤和方法.在此基础上,对具有体接触的NMOS/SOI器件进行了具体的测试和分析,给出了不同的累积应力时间下的界面陷阱沿沟道方向的横向分布.结果表明:随累积应力时间的增加,不仅漏端边界的界面陷阱峰值上升,而且沿沟道方向,界面陷阱从漏端不断向源端增生.     

一种MPEG2视频编码的神经网络自适应量化算法

本文在ＭＰＥＧ２ＴＭ５建议我自适应量化策略的基础上，提出了一种ＭＰＥＧ２视频编码的神经网络自适应量化算法。     

烷基化换热器的腐蚀失效分析和防护措施

通过对烷基化车间换热器腐蚀形貌、特征、产物、腐蚀介质、积垢、材料以及换热器流体特性的研究和分析,认为烷基化换热器的腐蚀失效主要由空泡腐蚀和湍流腐蚀引起,并提出了4项防腐蚀措施.经现场应用证明:改变设计或安排辅助管可以有效地减缓冷却管与管板结合部位的严重腐蚀.     

扫描激光雷达的视场角和角分辨率研究

分析了出瞳扫描方式扫描视场角与激光雷达光学系统参数的关系，认为最大扫描视场角比主天线望远镜静态视场角小，在信号过程线性的前提下，根据强度像的瑞利判据提出了扫描激光雷达角分辨率公式建议。对主要结论都进行了实验验证。     

Microfabricated liquid chromatography columns based on collocated monolith support structures

There is great interest today in massively parallel analytical strategies as a way to accelerate the rate of discovery in biological research; among them being 'biochips' and 'laboratories-on-a-chip'. The concept in the 'chip' approach is that minaturization will allow large numbers of operations to be performed in parallel in a small space, as in electronics. Proceeding with the semiconductor analogy, this paper demonstrates that in situ micromachining can be used to simultaneously fabricate millions of micrometer size, particle like structures in multiple liquid chromatography columns on a single wafer. Reduction of this widely used bioanalytical tool to the nanoliter volume, parallel processing, chip format is a significant step toward laboratories-on-a-chip.     

混凝土受拉断裂的破坏机理

本文从试验现象出发,建立了以数理统计为基础的混凝土受拉全过程曲线方程。研究表明,混凝土受拉应力应变全曲线是混凝土试件内部的粘结界面与水泥胶合物在外拉力作用下逐步断裂造成的。文章所建立的方法不仅可以解释许多试验现象,模拟混凝土受拉全曲线,而且还可以得出试验中难以测出的结果。