Preparation of zeolitic adsorbents from waste coal fly ash

Power plants burning coal generate a large amount of fly ash as waste matter. The objective of this study is to produce zeolitic adsorbents that possesses high adsorptive capacity for toxic cations. The sample was first pretreated with a High Intensity Magnetic Separator for the removal of iron and magnetic materials (mainly Fe₂O₃ and TiO₂). The zeolitic adsorbents were prepared under the various conditions of NaOH concentration (1–5 N), reaction time from 3 to 96 hours and at the various temperatures of 60, 80 and 100°C. The results of the experiment showed that the coal fly ash should be synthesized with 4 N NaOH for 48 hours at 100°C in order to have good adsorptive capacity. The zeolitic adsorbents showed higher cation exchange capacity values than the natural zeolite in removing NH ₄ ⁺ , Pb²⁺, Ca²⁺and Cd²⁺ions.     

Processabilities and mechanical properties of surlyn-treated starch/LDPE blends

The esterification of the hydroxyl group of starch with DuPont Surlyn was considered as pretreatment method of starch before blending with polyolefins. In treating starch with Surlyn, two different raction conditions were taken to optimize reaction conditions. First, the esterification reaction was carried out in 110°C xylene with oleic acid as a catalyst. Second, the reaction out in a 90°C mixture of deionized water and xylene with ceric ammonium nitrate(CAN) as an initiator. Starch granules would be swollen above the gelatinization temperature in water. In both cases starch was midified by Surlyn to have good compatibility with low-density polyethylene (LDPE). The mechanical and theological properties were examined for blends of the treated starch and LDPE. This system may be one of the biodegradable polymer blends that sufficiently retain properties as a packaging film.     

Enhanced extraction of isoflavones from Korean soybean by ultrasonic wave

The amounts of isoflavones extracted from Korean soybean by various ultrasonic waves were compared using 60% aqueous ethanol solution. The effect on extraction yield of variations in solvent composition, temperature, and extraction time was investigated. The experimental results confirmed that ultrasonic waves are a desirable method to extract isoflavones from Korean soybean. The highest yield of aglycone isoflavones was obtained by ultrasonic waves with a frequency of 20 KHz and an extraction time of 10 min, which produced yields of glycoside and aglycone isoflavones three-fold greater than those by dipping method.     

Control of NO x emissions from diesel engine by selective catalytic reduction (SCR) with urea

Topics in Catalysis - Among the catalysts screened, Cu-ion exchanged ZSM5 zeolite exhibited the highest NO removal activity, particularly at low reaction temperatures below 200 °C,...     

SEQUENTIAL LOOP CLOSING IDENTIFICATION OF MULTIVARIABLE PROCESSES USING THE BIASED RELAY FEEDBACK METHOD

Each controller in multiloop control systems for multivariable processes can be tuned sequentially with the ultimate information for the paired input and output while former loops have been closed, and hence, single-input single-output autotuning methods can be applied. In this sequential autotuning for multiloop control systems, several iterations are usually required for better control performances. Especially when pairings are undesirable, the autotuning sequences should be repeated with correct pairings, which result in long field experiments. Here, to avoid this drawback, a simple method to identify process models while loops are being sequentially tuned is proposed. The identified models can be used to correct pairings of multiloop control systems and to improve tuning performances without several field iterations. In addition, they can be used to obtain model-based control systems such as decoupling control systems.     

Studies on high-performance blended/multiblended cements and their durability characteristics

Number of blends were prepared by intergrinding clinker, gypsum, fly ash, calcined clay, microsilica and limestone in laboratory ball mill in varying percentages, and their physical properties such as fineness, consistency, setting time and compressive strength have been determined. The durability tests on selected compositions were also conducted by exposing the mortar cubes separately in 5% Na₂SO₄ and 5% NaCl solutions till the age of 90 and 180 days. The performance was observed by compressive strength development criteria after various length of exposure. Results have been discussed and found that the durability of blended cement is higher than the ordinary Portland cement.     

Pullout behavior of polypropylene fibers from cementitious matrix

A comprehensive experimental investigation was performed to understand the pullout behavior of polypropylene fibers from a cementitious matrix. The effect of embedded length on the pullout characteristics, the development of the interfacial bond with age of curing of matrix and the effect of exposure to degrading environments, like seawater and salt water, on the interfacial bond between the fibers and cementitious matrix were studied. The aim of these experiments was to understand the properties of fiber/matrix interface, which are of primary significance in predicting the overall behavior of fiber-reinforced cement-based composites. Polypropylene fibers have a weak bond with cementitious matrix because of smooth surface of fibers, which does not allow for sufficient friction to develop between the two. In this study a new method to improve the frictional bond by means of mechanical indentations of fibers was also proposed. The bonding performance was characterized by means of pullout tests of the plain and modified fibers from a cementitious matrix. An optimum level of fiber modification for maximization of bond efficiency was determined experimentally.     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

THE “UCKRON-1” TEST PROBLEM FOR REACTION ENGINEERING MODELING

Testing kinetic models against a “true” and detailed kinetic expression was the aim of the Workshop on Kinetic Model Development at the Denver AIChE Meeting in August, 1983. For this purpose an artificial reaction mechanism was created, based on the known thermodynamics of the methanol synthesis as a framework. The kinetic rate laws, that were derived from this mechanism, were made thermodynamically consistent by achieving agreement between equilibrium constants calculated at various temperatures from the given, real original thermodynamic relationship and those calculated from the detailed reversible kinetic expressions.

Using the artificial kinetics as the "true" one, CSTR experiments were simulated. The results of a statistically designed set of experiments were published after 5% random error was added to the data. Participation was invited for all interested to correlate the data, develop kinetic models and to calculate the performance of the specified reactor.

The results of 19 submitted entries are summarized with the conclusion that the models had more differences than were expected, but their predictive values were not as different as was anticipated, if the extreme high production rates due to thermal runaways are not considered. This in turn points out the necessity to check models experimentally, in pilot plant, not only for predicted optimum, but also for calculated runaway conditions. Models which did not capture the true character of this reaction failed to predict the onset of runaway reactions.     

Electrochemical pitting behaviour of type 321 stainless steel in sulfide-containing chloride solutions

The pitting behaviour of type 321 stainless steel in sulfide-containing chloride aqueous environments was studied using cyclic potentiodynamic polarization. A well-established correlation between H₂S and Na₂S₂O₃ in the study of corrosion was applied, that is, H₂S was simulated by Na₂S₂O₃. The major factors affecting the pitting corrosion of type 321 stainless steel are the Cl^- concentration, solution pH and temperature. The results clearly indicate that both E_pit and E _pp decrease with increasing Cl^- concentration and temperature, while I _pass is more sensitive to temperature variation. E _pit decreased with decreasing pH in the range 2 < pH < 7.5. The surface morphology and chemistry of the corroded type 321 stainless steel resulting from anodic polarization in 0.01 M S₂O ₃ ^2- -containing Cl^- solution were analysed by XRD, SEM and EPMA. A higher concentration of sulfur was found in the pits, and the dark surface film was mainly composed of FeS and -Fe₂O₃. The results describe the pitting behaviour of type 321 stainless steel in sulfide-containing Cl^- aqueous environments.