A detailed analysis of ambipolar diffusion in nanostructured metal oxide films

In this paper a transport equation is derived which describes the behaviour of the nanostructured metal oxide films in a photoelectrochemical cell. It is shown that a detailed analysis of the charge compensation mechanism necessarily leads to a transport equation with characteristics similar to but logically distinct from the pure diffusion equation. The studied phenomenon was named ambipolar diffusion in the early 1950s. It takes into account the fact that the diffusion processes of ions and electrons occur at different speeds. A weak electric field therefore couples the processes together to preserve charge neutrality. The electric field in turn affects the transport resulting in a deviation from purely diffusive behaviour. However, this has not been widely recognised in the literature for nanostructured semiconductor films until very recently. In this paper a detailed analysis is presented. It is based on the assumption that the current density is solenoidal. It is shown that application of the ambipolar diffusion model to a photoelectrochemical cell based on a nanostructured metal oxide film leads to an additional term in the transport equation, rather than only a new diffusion coefficient as in earlier work. It is also shown that the boundary conditions interact closely with the equation to form a transport model.     

A planar integrated RCD snubber/voltage clamp

In order to reduce the cost, size, and weight of power electronic systems, it has become necessary to integrate electromagnetic structures, which until now have been constructed with discrete components. This approach not only reduces the component count, but also gives much greater control over parasitic elements. In this article, the authors describe an electromagnetically integrated resistor-capacitor-diode (RCD) snubber/voltage clamp that uses a planar construction technique. The design and construction are described and the performance is verified experimentally. Some advantages of the integrated component over its discrete counterpart are also given     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Primary prevention of malignant melanoma in the Stockholm Cancer Prevention Programme

The relation between intracoronary thrombus and endothelin-1 (ET-1) was studied. In a canine model, acute myocardial infarction (MI) was induced by coronary occlusive thrombus produced at a mock atheromatous plaque. Blood samples were collected from the aorta (A) and coronary vein (V). Twenty-eight open-chest dogs divided into three groups were studied. Group I (n = 15): acute MI was induced by coronary occlusive thrombus, and thrombolysis was obtained by urokinase two hours after MI. Group II (n = 8): nonocclusive thrombus was produced without inducing MI. Group III (n = 5): coronary artery was ligated for two hours and reperfused by release of ligation. In Group I, ET-1 was significantly increased after MI in A and V, and ET-1 in V was significantly more elevated than in A during thrombolysis, suggesting ET-1 production in the coronary vessels by thrombolysis. In Group II, ET-1 increased slightly during thrombus formation, but there was no difference in A and V. In Group III, ET-1 was elevated significantly after MI without A and V difference. These results indicate that there is no detectable ET-1 production with coronary thrombus formation, whereas coronary ET-1 production is detected during thrombolysis, most probably because resolved thrombus releases a more potent stimulus to ET-1 production.     

Non-invasive assessment of magnitude and dispersion of atrial cycle length during chronic atrial fibrillation in man

AIMS: Atrial fibrillation cycle lengths can be assessed from right precordial ECG leads and the unipolar oesophageal ECG using a non-invasive method called Frequency Analysis of Fibrillatory ECG. The purpose of this report is to present the results from application of this method in a large group of patients with long-term atrial fibrillation and to examine the differences between patients with 'coarse' and 'fine' atrial fibrillation. METHODS AND RESULTS: Simultaneous 15 min recordings from V1, V2 and an oesophageal lead at a position behind the posterior atrium were obtained in 28 patients, aged 41 to 78 years, with long-term (> 1 month) atrial fibrillation. In each lead, using the time averaging technique, the QRST complexes were suppressed. Thereafter, the frequency distribution of the residual ECG was estimated by means of Fast Fourier Transform. In the 3-12 Hz range of each lead, the dominant atrial cycle length, the power maximum and the spectral width were calculated. In 26 patients (93%), frequency spectra in the 3-12 Hz range could be obtained. The dominant atrial cycle length ranged from 120 to 175 ms, mean 150+/-16 (SD) ms in V1, and from 120 to 190 ms, mean 150+/-16 in an oesophageal lead (ns). The absolute difference in the dominant atrial cycle length between V1 and the oesophageal lead was 10.4+/-7.7 ms. There was no significant difference in the dominant atrial cycle length in V1 between patients with coarse and fine atrial fibrillation. The power maximum in V1 was significantly greater in patients with coarse compared to fine atrial fibrillation (P=0.01). The spectral widths ranged from 10 to 55 ms and demonstrated significantly higher mean values in lead V2 compared to V1 (P=0.001). Compared to V1, the mean values tended to be smaller in the oesophageal lead (P=0.05). CONCLUSIONS: Using the Frequency Analysis of Fibrillatory ECG method, the dominant atrial cycle length, power maximum and spectral width can be estimated from the frequency spectra in the majority of patients with atrial fibrillation. Spatial dispersion of the dominant atrial cycle length occurs in some patients and may be an important proarrhythmic marker. The distinction between coarse and fine atrial fibrillation cannot be used as a marker of the atrial cycle length.     

Identification of domains involved in superantigenicity of streptococcal pyrogenic exotoxin F (SpeF)

Coronary artery angioplasty or bypass is being performed for increasing numbers of patients in their seventh, eighth, ninth and even tenth decades of life. Because of the cost involved, justification for performing these procedures in the elderly has become a topic of daily discussion among those responsible for funding healthcare. Both silent and overt coronary artery disease (CAD) are more common in the population over 65 years of age. Because CAD in the elderly often presents in an atypical manner, diagnosis of the disease is frequently delayed. Partly because of the delayed diagnosis and partly because of cost considerations, coronary arterial bypass (CABG) is more often performed as an emergency procedure in the elderly with the results that both operative mortality and costs are increased over those observed in a younger population. Nevertheless, it is clear that performance of coronary revascularization procedures in the elderly can both prolong life and improve the quality of life beyond what can be achieved using alternative methods of treatment. Greater efforts directed toward detection of ischemic heart disease in the these patients and earlier, elective surgery could significantly reduce both the mortality and disability associated with CAD in the elderly.     

The T Cell Repertoires from Nickel Sensitized Joint Implant Failure Patients

Nickel (Ni²⁺) is one of the most common allergens, affecting around 10–15% of the general population. As the demand for orthopedic implant surgery rises, the number of surgical revisions due to joint implant failure also increases. There is evidence that some patients develop joint failure due to an immune response to a component of the implant, and we have found that Ni²⁺ is an especially important cause. Hence, understanding the mechanisms by which Ni²⁺ allergy induces joint implant failure becomes a critical research question. The structural basis of Ni²⁺ activation of pathogenic T cells is still not clear. The purpose of this study was to characterize Ni²⁺-reactive T cell repertoires derived from the peripheral blood of joint failure patients due to Ni²⁺ sensitization using single-cell sequencing techniques. We stimulated the proliferation of Ni²⁺ -reactive T cells from two implant failure patients in vitro, and sorted them for single-cell VDJ sequencing (10× genomics). We identified 2650 productive V-J spanning pairs. Both TCR α chains and β chains were enriched. TRBV18 usage is the highest in the P7 CD4+ population (18.1%), and TRBV5-1 usage is the highest in the P7 CD8+ population (12.1%). TRBV19 and TRBV20-1 segments are present in a high percentage of both P7 and P9 sequenced T cells. Remarkably, the alpha and beta chain combination of TRAV41-TRBV18 accounts for 13.5% of the CD4+ population of P7 patient. Compared to current Ni specific T cell repertoire studies of contact dermatitis, the Vα and Vβ usages of these joint implant failure patients were different. This could be due to the different availability of self-peptides in these two different tissues. However, TRBV19 (Vβ17) was among frequently used TCR β chains, which are common in previous reports. This implies that some pathogenic T cells could be similar in Ni²⁺ hypersensitivities in skin and joints. The alignment of the TCR CDR3β sequences showed a conserved glutamic acid (Glu) that could potentially interact with Ni²⁺. The study of these Ni²⁺ specific TCRs may shed light on the molecular mechanism of T cell activation by low molecular weight chemical haptens.