Formation of bed agglomeration in a fluidized multi-waste incinerator

A case study was carried out to investigate the bed agglomeration observed in a fluidized bed incinerator when burning blends of three wastes (carbon soot, biosludge and fuel oil). Several instrumental approaches were employed (i.e. XRF, SEM, XRD, and ICP-AES) to identify the bed materials (fresh sand and degrader sand) and clinkers formed in the full-scale incinerator tests. Several elements (V, Al, S, Na, Fe, Ni, P, and Cl), which normally are associated with the formation of low melting point compounds, were found in the waste blends at high content levels. The clinker bridges were identified to be associated with Al, Fe, V, K, Na, S, Ni, and Si elements.The effects of temperature and blending ratio were investigated in a muffle furnace. Carbon soot is believed to be more susceptible to the clinker formation than the other two fuels. Thermodynamic multi-phase multi-component equilibrium calculations predict that the main low melting point species could be Al₂(SO₄)₃, Fe₂(SO₄)₃, Na₂SO₄, NaCl, Na₂SiO₃ and V₂O₅. This information is useful to understand the chemistry of clinker formation. Also, it helps to develop methods for the control and possible elimination of the agglomeration problem for the design fuels.     

Two-Dimensional Whisker Percolation in Ceramic Matrix–Ceramic Whisker Composites

A computer model that treats ceramic-powder matrix–ceramic whisker composites as a percolative network of whiskers has been developed. The model calculates the critical fraction of whiskers at the percolation threshold for a two-dimensional random network of whiskers. The computed critical fraction was found to display an inverse dependence on whisker aspect ratio. In addition, the computed critical fraction (27 vol% for a whisker aspect ratio of 7) agreed well with the zero-shrinkage whisker fraction of 30 vol% in the densification of a colloid-pressed alumina–silicon carbide composite that exhibited a two-dimensional orientation of such whiskers.     

The Influence of High Temperature Exposure on the Wear Performance of a Ni Based Alloy PTA Coating

Degradation phenomena like wear and corrosion, may have their effects accelerated as components operate at high temperature. The aim of this work is to make an indirect evaluation of the influence of high temperature exposure on wear behavior of Ni coatings. A Ni-Cr-Mo-W alloy, was deposited with Plasma Transferred Arc (PTA) process. An indirect approach based on the Ahrrenius relationship was used to evaluated long time exposures at high temperatures. To simulate longer exposures at lower temperatures, coatings were exposed to higher temperatures for the same time interval. So coatings were soaked in an air furnace at 650℃, 1000℃ and 1200℃. Metal/metal wear behavior was evaluated by pin-on-disc tests. Pins were removed from the coatings by eletrodischarge machining and rubbed against a VC31 quenched and tempered tool steel. Two sets of wear tests were run at 2m/s, for different loads (0.5, 1.0, 2.0 and 3.0Kg) and for different sliding distances (120, 720, 1080, 1440 and 1800m).Coatings characterization was done by scanning electronic microscopy and Vickers microhardness. Results showed as temperature is increased, coatings wear performance is altered,and this is associated with microstructural changes.     

'Tacitus' project: identifying multi-sensory perceptions in creative 3D practice for the development of a haptic computing system for applied artists

This paper outlines the major motivating factors concerning a novel collaborative project between Edinburgh College of Art and Edinburgh Virtual Environment Centre. The Tacitus project will investigate the use of multi-modal virtual environments, specifically, the haptic (touch) modality, with regards to the creative processes employed by designers working within the field of applied arts. The salient areas of research are described, and the methods by which information regarding these areas will be obtained are considered. Initial investigations have revealed a strong need to mimic the traditional applied artists' workspaces, with co-location of visual and haptic cues a priority.     

Screening of organic contaminants in urban snow

Snowmelt is known to cause peak concentrations of pollutants, which may adversely affect receiving water quality. High concentrations of metals and suspended solids in snow have been reported, whereas studies on organic pollutants are rare. This study aims at investigating the occurrence of anthropogenic organic compounds in urban snow in Gothenburg (Sweden). The most frequently detected organic pollutants in the collected snow samples were polycyclic aromatic hydrocarbons (PAHs), high molecular-weight phthalates, 4-nonylphenol and 4-t-octylphenol. Brominated flame retardants and chlorinated paraffins were only sporadically detected. In several snow samples, the concentrations of specific PAHs, alkylphenols and phthalates were higher than reported stormwater concentrations and European water quality standards. Pollutant source identification and sustainable management of snow are important instruments for the mitigation of organic contaminants in the urban environment.     

Slips and falls in a cold climate: underfoot surface, footwear design and worker preferences for preventive measures

Slips and falls and associated outdoor injuries are prevalent in cold climates. The objectives of this field investigation were to describe the consequences of slips and falls on ice and snow and the associated injuries, to assess the risks of various icy and snowy surfaces, to identify design needs of footwear, and to ascertain preventive measure preferences of outdoor workers. The organizations investigated were a newspaper delivery service, a military regiment, mining and construction industries. The results showed that fall events occur most frequently on ice covered with snow. This is due to the difficulty of perceiving hidden risks in order to adjust gait strategies. The professional footwear provided does not provide enough protection against slips and falls. Slip resistant properties are ranked as one of the top requirements by the users. Their most preferred preventive measures are footwear with anti-slip properties and the application of anti-slip materials, such as sand or salt.     

Electrochemical studies of octadecanethiol and octanethiol films on variable surface area mercury sessile drops

Octadecanethiol (ODT) and octanethiol (OT) films at the mercury-electrolyte interface are examined using cyclic voltammetry and differential capacitance measurements at a single frequency. A mercury flow-system is used to alter the volume, and therefore, the surface area and surface pressure of the mercury electrode. Manipulation of the mercury electrode's volume enables the introduction and removal of defects in the insulating thiol films. OT and ODT film behavior are contrasted under conditions of expansion and contraction. ODT forms extremely impermeable layers that allow 1000 time less redox probe current than seen on uncoated drops. Expansion of the mercury electrode to increase the electrode surface area produces defects and pinholes in the thiol film. These defects are almost completely removed when the drop is compressed back to its initial surface area. OT also forms insulating films on mercury sessile drops, however these films contain more defects than ODT films. While expansion of an OT-coated mercury drop increases redox probe current, recompression of the drop does not return the film to its initial condition. Pinholes and defects in the OT and ODT films can also be produced by cycling to negative potentials, which produce abrupt stripping peaks.     

Interventional ultrasound in Europe

"Interventional ultrasound," defined as any diagnostic and therapeutic procedure performed under ultrasound guidance was first introduced in Europe, where its early development took place in Vienna, in Copenhagen, in Italy and in Switzerland. However, many of the applications of interventional ultrasound have been based on important pioneer work using other less-suitable needle guiding methods from the pre-ultrasound era. The European contributions to "interventional ultrasound" have especially been in the development of new puncture equipment, in the dissemination of various biopsy techniques, and draining procedures and, more recently, in the development of many different tissue-ablation techniques. The above contributions, which are outlined in this historical review, have, together with significant contributions from the rest of the world-not least from the United States and Japan-created a most efficient diagnostic as well as therapeutic tool for the benefit of our patients.     

Simultaneous machining of parallel grooves in SnO(2) thin films using a Nd:YAG laser and a kinoform

A kinoform is used to split the beam of a Nd:YAG laser into six beams. The laser beams are, by means of optical fibers and collimating-focusing optics, transferred to the surface to be machined. Thus multiple grooves can be machined simultaneously. For demonstration, 100-μm-wide grooves are simultaneously machined into a SnO(2) thin film deposited on a glass substrate. The resulting grooves are well isolated. This result shows that the technique could be used, for example, in solar cell manufacturing to increase the efficiency of laser scribing.