High Throughput Screening of Low Temperature SCR and SCD De-NOx Catalysts in Scanning Mass Spectrometer

High-throughput synthesis and screening methods have been developed for the discovery of highly active lead compounds for the selective catalytic reduction as well as direct decomposition of NO in the temperature range 200–300 °C. The discovery libraries for primary screening consisted of 16 × 16 catalyst arrays on 4in. square quartz wafers. Catalysts were prepared by robotic liquid dispensing techniques and screened for catalytic activity in Symyx' scanning mass spectrometer. The scanning mass spectrometer is a fast serial screening tool that uses flat wafer catalyst surfaces, local laser heating, a scanning/sniffing nozzle and a quadrupolar mass spectrometer to compare relative catalytic activities. The feed consisted of NO/NH₃ mixtures with optional O₂ cofeed and Kr as the internal standard in Ar carrier gas. QMS detection allowed for tracking of H₂O, N₂, NO, O₂, N₂O and Kr. Screening protocols for catalytic materials encompassed metal precursors and carriers for supported vanadia systems, extensive doping of V₂O₅/TiO₂, and broad screening of mixed redox metal oxides and supported base and noble metal systems. More than 500 samples could be screened in a single day. Active hits (high NO consumption accompanied by corresponding N₂ production) identified in discovery libraries were re-synthesized as focus libraries for lead confirmation and further optimization. These libraries used shallower compositional gradients, for example 56 points (compositions) per ternary, with four 56-point ternaries per 4in. wafer. Broad screening ternaries were generally 8 or 15 points. The focus libraries more clearly reveal the trends and provide guidelines for secondary screening and scale-up. High conversions were achieved in scanning mass spectrometer so the scalability risk is small for the short contact time reactions.     

Synthesizing robust systems

Systems should not only be correct but also robust in the sense that they behave reasonably in unexpected situations. This article addresses synthesis of robust reactive systems from temporal specifications. Existing methods allow arbitrary behavior if assumptions in the specification are violated. To overcome this, we define two robustness notions, combine them, and show how to enforce them in synthesis. The first notion applies to safety properties: If safety assumptions are violated temporarily, we require that the system recovers to normal operation with as few errors as possible. The second notion requires that, if liveness assumptions are violated, as many guarantees as possible should be fulfilled nevertheless. We present a synthesis procedure achieving this for the important class of GR(1) specifications, and establish complexity bounds. We also present an implementation of a special case of robustness, and show experimental results.     

Synthesis and characterization of cleavable surfactants derived from poly(ethylene glycol) monomethyl ether

A series of noncyclic acetal-linked cleavable surfactants were simply prepared by condensation of aldehydes with poly(ethylene glycol) monomethyl ethers. All of the products were characterized by¹H nuclear magnetic resonance. Their hydrophile-lipophile balance, surface tension, cloud point, critical micelle concentration, and foam height were determined. Hydrolysis kinetic studies, followed by gas chromatography, showed that they had higher hydrolytic reactivity in acidic solution than cyclic acetal-linked cleavable surfactants.     

Carbohydrate type and amount alter intravascular processing and catabolism of plasma lipoproteins in guinea pigs

To test the effects of exchanging dietary complex and simple carbohydrate for fat calories on lipoprotein metabolism, guinea pigs were fed two different fat/carbohydrate ratios: 2.5∶58% (w/w) or 25∶29% (w/w) with either sucrose or starch as the carbohydrate source. Animals fed high-fat had higher plasma low-density lipoprotein (LDL) and hepatic cholesterol concentrations than animals fed low-fat diets (P<0.01). The cholesteryl ester content per particle was higher, and the number of triacylglycerol (TAG) molecules was lower in very low density lipoprotein (VLDL) and LDL from animals fed high-fat diets. Intake of high-fat/sucrose resulted in higher plasma LDL concentrations than intake of high-fat/starch, and animals fed low-fat/starch had the highest plasma TAG concentrations associated with VLDL particles containing more TAG molecules, as well as a TAG-enriched LDL. The activity of plasma lecithin cholesteryl:acyl transferase (LCAT) was highest in animals fed high-fat/sucrose, and heart lipoprotein lipase (LPL) activity was higher in animals fed high-fat diets. Hepatic apoprotein B/E (apo B/E) receptor number (B_max) was increased 21% with low-fat diets (P<0.01). These results suggest that the hypercholesterolemia induced by high-fat and by sucrose intake are associated with a higher plasma LCAT activity which results in a cholesteryl ester-enriched VLDL which, by the action of LPL, might be more readily converted to LDL through the delipidation cascade leading to downregulation of hepatic apo B/E receptors. The hypertriglyceridemia associated with low-fat intake may result from increased production of VLDL TAG, which would explain the increased TAG content and the higher TAG/CE ratio of VLDL from animals fed the low-fat/starch diet.     

Formation of bed agglomeration in a fluidized multi-waste incinerator

A case study was carried out to investigate the bed agglomeration observed in a fluidized bed incinerator when burning blends of three wastes (carbon soot, biosludge and fuel oil). Several instrumental approaches were employed (i.e. XRF, SEM, XRD, and ICP-AES) to identify the bed materials (fresh sand and degrader sand) and clinkers formed in the full-scale incinerator tests. Several elements (V, Al, S, Na, Fe, Ni, P, and Cl), which normally are associated with the formation of low melting point compounds, were found in the waste blends at high content levels. The clinker bridges were identified to be associated with Al, Fe, V, K, Na, S, Ni, and Si elements.The effects of temperature and blending ratio were investigated in a muffle furnace. Carbon soot is believed to be more susceptible to the clinker formation than the other two fuels. Thermodynamic multi-phase multi-component equilibrium calculations predict that the main low melting point species could be Al₂(SO₄)₃, Fe₂(SO₄)₃, Na₂SO₄, NaCl, Na₂SiO₃ and V₂O₅. This information is useful to understand the chemistry of clinker formation. Also, it helps to develop methods for the control and possible elimination of the agglomeration problem for the design fuels.     

Mammalian Exocrine Secretions. XVIII: Chemical Characterization of Interdigital Secretion of Red Hartebeest, Alcelaphus buselaphus caama

Gas chromatography, coupled gas chromatography-mass spectrometry (electron impact mode and chemical ionization with methane as reactant gas), gas chromatography-infrared spectroscopy, and derivatization techniques were used to identity 53 compounds in the interdigital secretion of the red hartebeest, Alcelaphus buselaphus caama. These compounds included alkanes, isoalkanes, alcohols, ketones, carboxylic acids, oxiranes, furanoid linalool oxides, and a large number of branched and unbranched saturated and unsaturated aldehydes. The secretion probably plays a role in demarcation of territories by dominant bulls.     

Influence of motion correction on the visual analysis of cardiac magnetic resonance stress perfusion imaging

Objective

Image post-processing corrects for cardiac and respiratory motion (MoCo) during cardiovascular magnetic resonance (CMR) stress perfusion. The study analyzed its influence on visual image evaluation.

Materials and methods

Sixty-two patients with (suspected) coronary artery disease underwent a standard CMR stress perfusion exam during free-breathing. Image post-processing was performed without (non-MoCo) and with MoCo (image intensity normalization; motion extraction with iterative non-rigid registration; motion warping with the combined displacement field). Images were evaluated regarding the perfusion pattern (perfusion deficit, dark rim artifact, uncertain signal loss, and normal perfusion), the general image quality (non-diagnostic, imperfect, good, and excellent), and the reader’s subjective confidence to assess the images (not confident, confident, very confident).

Results

Fifty-three (non-MoCo) and 52 (MoCo) myocardial segments were rated as ‘perfusion deficit’, 113 vs. 109 as ‘dark rim artifacts’, 9 vs. 7 as ‘uncertain signal loss’, and 817 vs. 824 as ‘normal’. Agreement between non-MoCo and MoCo was high with no diagnostic difference per-patient. The image quality of MoCo was rated more often as ‘good’ or ‘excellent’ (92 vs. 63%), and the diagnostic confidence more often as “very confident” (71 vs. 45%) compared to non-MoCo.

Conclusions

The comparison of perfusion images acquired during free-breathing and post-processed with and without motion correction demonstrated that both methods led to a consistent evaluation of the perfusion pattern, while the image quality and the reader’s subjective confidence to assess the images were rated more favorably for MoCo.

     

The Influence of High Temperature Exposure on the Wear Performance of a Ni Based Alloy PTA Coating

Degradation phenomena like wear and corrosion, may have their effects accelerated as components operate at high temperature. The aim of this work is to make an indirect evaluation of the influence of high temperature exposure on wear behavior of Ni coatings. A Ni-Cr-Mo-W alloy, was deposited with Plasma Transferred Arc (PTA) process. An indirect approach based on the Ahrrenius relationship was used to evaluated long time exposures at high temperatures. To simulate longer exposures at lower temperatures, coatings were exposed to higher temperatures for the same time interval. So coatings were soaked in an air furnace at 650℃, 1000℃ and 1200℃. Metal/metal wear behavior was evaluated by pin-on-disc tests. Pins were removed from the coatings by eletrodischarge machining and rubbed against a VC31 quenched and tempered tool steel. Two sets of wear tests were run at 2m/s, for different loads (0.5, 1.0, 2.0 and 3.0Kg) and for different sliding distances (120, 720, 1080, 1440 and 1800m).Coatings characterization was done by scanning electronic microscopy and Vickers microhardness. Results showed as temperature is increased, coatings wear performance is altered,and this is associated with microstructural changes.     

'Tacitus' project: identifying multi-sensory perceptions in creative 3D practice for the development of a haptic computing system for applied artists

This paper outlines the major motivating factors concerning a novel collaborative project between Edinburgh College of Art and Edinburgh Virtual Environment Centre. The Tacitus project will investigate the use of multi-modal virtual environments, specifically, the haptic (touch) modality, with regards to the creative processes employed by designers working within the field of applied arts. The salient areas of research are described, and the methods by which information regarding these areas will be obtained are considered. Initial investigations have revealed a strong need to mimic the traditional applied artists' workspaces, with co-location of visual and haptic cues a priority.