Anodization for Simplified Processing and Efficient Charge Transport in Vertical Organic Field‐Effect Transistors

Vertical organic transistors are an attractive alternative to realize short channel transistors, which are required for powerful electronic devices and flexible electronic circuits operating at high frequencies. Unfortunately, the vertical device architecture comes along with an increased device fabrication complexity, limiting the potential of this technology for application. A new design of vertical organic field‐effect transistors (VOFETs) with superior electrical performance and simplified processing is reported. By using electrochemical oxidized aluminum oxide (AlO_x) as a pseudo self‐aligned charge‐blocking structure in vertical organic transistors, direct leakage current between the source and drain can be effectively suppressed, enabling VOFETs with very low off‐current levels despite the short channel length. The anodization technique is easy to apply and can be surprisingly used on both n‐type and p‐type organic semiconductor thin films with significant signs of degradation. Hence, the anodization technique enables a simplified process of high‐performance p‐type and n‐type VOFETs, paving the road toward complementary circuits made of vertical transistors.     

Expected interference in wireless networks with geometric path loss: a closed-form approximation

In this letter, we derive 2λπP/((α - 2)g^{(α - 2)} as a closed-form approximation of the expected interference around a receiver in wireless networks. We use a geometric path loss model, assume that nodes are randomly distributed, and that only nodes outside a guard zone around the receiver simultaneously transmit. The derived solution depends on the path loss exponent α, node density λ, transmission power per node P, and the radius g of the guard zone. The simplicity of this solution makes it widely applicable in wireless network analysis.     

Video mediated social interaction between groups: System requirements and technology challenges

This paper discusses results from research related to the use of television as a device that supports social interaction between close-knit groups in settings that include more than two locations, each location being potentially equipped with more than one camera. The paper introduces the notion of a framing experience, as a specific scenario or situation within which social communication takes place. It reports on the evaluation of some of the key attributes of social communication through semi-structured interviews, with 16 families across four European countries. The inferences drawn from this study are reduced to four system capabilities including the ability to support: excitement, engagement and entertainment; high quality, reliable audiovisual communications; flexibility and adaptability sufficient to support the unpredictable and reactive nature of human interaction and discourse. These system requirements are, in turn, reduced to a number of technology challenges which if solved will help enable effective social communications between groups, mediated by the television. These technology challenges include: high quality reliable audio visual communication; interaction orchestration, multimedia interpretation and multimedia composition. Finally the paper reflects on the impact the use of framing experiences, such as those described here, could have on strategy and policy for service providers and regulators.     

Terahertz Heterodyne Array Receivers for Astronomy

Journal of Infrared, Millimeter, and Terahertz Waves - We review the development of multi-pixel heterodyne receivers for astronomical research in the submillimeter and terahertz spectral domains....     

Influence of Temperature on Shockley Stacking Fault Expansion and Contraction in SiC PiN Diodes

While Shockley stacking fault (SSF) creation and expansion within 4H-SiC bipolar devices is well known, only recently was it observed that this expansion and the associated increase in the forward voltage drop (V _f) could be completely reversed via low-temperature annealing. Here we report the temperature dependence of the recovery rate of the V _f drift via annealing, reporting an activation energy of 1.3 ± 0.3 eV. The V _f drift was observed to saturate following extended electrical stressing, and it was observed that the value of V _f at this saturation was inversely proportional to the stressing temperature. We also observed that SSF and V _f drift recovery could occur in highly stressed diodes at elevated temperatures even under high current injection conditions (14 A/cm²).     

Image superresolution using support vector regression.

A thorough investigation of the application of support vector regression (SVR) to the superresolution problem is conducted through various frameworks. Prior to the study, the SVR problem is enhanced by finding the optimal kernel. This is done by formulating the kernel learning problem in SVR form as a convex optimization problem, specifically a semi-definite programming (SDP) problem. An additional constraint is added to reduce the SDP to a quadratically constrained quadratic programming (QCQP) problem. After this optimization, investigation of the relevancy of SVR to superresolution proceeds with the possibility of using a single and general support vector regression for all image content, and the results are impressive for small training sets. This idea is improved upon by observing structural properties in the discrete cosine transform (DCT) domain to aid in learning the regression. Further improvement involves a combination of classification and SVR-based techniques, extending works in resolution synthesis. This method, termed kernel resolution synthesis, uses specific regressors for isolated image content to describe the domain through a partitioned look of the vector space, thereby yielding good results.     

Diindenoperylene derivatives: A model to investigate the path from molecular structure via morphology to solar cell performance

Efficient organic electronic devices require a detailed understanding of the relation between molecular structure, thin film growth, and device performance, which is only partially understood at present. Here, we show that small changes in molecular structure of a donor absorber material lead to significant changes in the intermolecular arrangement within organic solar cells. For this purpose, phenyl rings and propyl side chains are fused to the diindenoperylene (DIP) molecule. Grazing incidence X-ray diffraction and variable angle spectroscopic ellipsometry turned out to be a powerful combination to gain detailed information about the thin film growth. Planar and bulk heterojunction solar cells with C60 as acceptor and the DIP derivatives as donor are fabricated to investigate the influence of film morphology on the device performance. Due to its planar structure, DIP is found to be highly crystalline in pristine and DIP:C60 blend films while its derivatives grow liquid-like crystalline. This indicates that the molecular arrangement is strongly disturbed by the steric hindrance induced by the phenyl rings. The high fill factor (FF) of more than 75% in planar heterojunction solar cells of the DIP derivatives indicates excellent charge transport in the pristine liquid-like crystalline absorber layers. However, bulk heterojunctions of these materials surprisingly result in a low FF of only 54% caused by a weak phase separation and thus poor charge carrier percolation paths due to the lower ordered thin film growth. In contrast, crystalline DIP:C60 heterojunctions lead to high FF of up to 65% as the crystalline growth induces better percolation for the charge carriers. However, the major drawback of this crystalline growth mode is the nearly upright standing orientation of the DIP molecules in both pristine and blend films. This arrangement results in low absorption and thus a photocurrent which is significantly lower than in the DIP derivative devices, where the liquid-like crystalline growth leads to a more horizontal molecular alignment. Our results underline the complexity of the molecular structure-device performance relation in organic semiconductor devices.     

Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used

The influence of the type of backsheet on the electrical performance of test modules was evaluated before and after increasing time of accelerated ageing (damp heat [DH] exposure). Besides the measurement of the electrical power of the modules and the performance of the cells by electroluminescence, the ageing‐induced changes within the polymeric encapsulate and backsheets were investigated by means of vibrational spectroscopy and by thermo analytical methods. In addition, the permeability of the backsheets in the original and aged state was determined. This wide set of test parameters and methods allowed for the detection of correlations between (i) physical and chemical properties as well as their ageing‐induced changes of the materials and (ii) the module performance. A clear dependence of the relative loss in power output upon exposure under DH conditions for 2000 h could be observed for a set of identical test modules varied in composition only in the type of back cover used. While the modules containing gas‐tight backsheets and glass experienced only little loss in the relative power output, some modules with permeable backsheets showed a significant relative decrease in the power output and fill factor in dependence of the backsheet type used. Cell degradation could be visualised by recording electroluminescence images before and after the accelerated ageing test. The permeation properties of the backsheet used and their ageing‐induced changes seem to have an influence on the module performance. However, the absolute values neither of the water vapour transmission rate (WVTR) nor of the oxygen transmission rate (OTR) are directly linked to the loss in power output upon accelerated ageing under DH conditions. It could be shown that the ageing‐induced changes (relative transmission rates) between WVTR and OTR can be correlated with the module performance. These ageing‐induced changes in the permeation behaviour of the backsheets can be explained by (i) physical changes (e.g. post‐crystallisation, changes in the crystal structure or the crystalline microstructure) and (ii) chemical ageing effects such as a decrease in the molecular mass of the polyester (PET) polymer chains because of hydrolytic polymer degradation leading to a change in the crystallisation behaviour of PET. Hydrolytic degradation (= chemical ageing) of the PET core layer was observed (with varying extent) for all PET‐based backsheets and can, thus, not be directly correlated with the loss in performance of the corresponding test modules. The physical ageing effects, however, were detected only for those backsheets showing (i) strong deviating changes in the relative permeation rates for oxygen and water vapour upon accelerated ageing and (ii) a clear loss in electrical performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Multimodal Bioactivation of Hydrophilic Electrospun Nanofibers Enables Simultaneous Tuning of Cell Adhesivity and Immunomodulatory Effects

Biomaterials research usually focuses on functional and structural mimicry of the extracellular matrix or tissue hierarchy and morphology. Most recently, material‐induced modulatory effects on the immune system to arouse a healing response is another upcoming strategy. Approaches, however, that integrate both aspects to induce healing and facilitate specific cell adhesion are so far little explored. This study exploits manifold but chemical crosslinker free functionalization of hydrophilic and nonadhesive electrospun fiber surfaces with peptides for controlled cell adhesion, and with neutra­lizing antibodies targeting the master cytokine tumor necrosis factor (TNF) to dampen proinflammatory reactions by the fiber adherent cells. It is demonstrated that cell attachment and immunomodulatory properties of a textile can be tailored at the same time to generate meshes that combine immunosuppressive activity with specific cell adhesion properties.