Characterisation of the adsorption sites of hydrogen on Pt/C fuel cell catalysts

A key component of a hydrogen fuel cell is a catalyst to dissociate dihydrogen to hydrogen atoms. In the present study, the adsorption of hydrogen on Pt/C fuel cell catalysts has been investigated by inelastic neutron scattering spectroscopy.

Monitoring a clean Pt(50%)/C catalyst with low energy neutron spectroscopy, after exposure to dihydrogen at 20 K, as it was heated to room temperature, showed three distinct temperature regimes: (i) a decrease in intensity from 10 to 60 K, (ii) a rise to a maximum between 60 and 120 K and then (iii) a slow fall-off towards room temperature. We assign the three regions as: (i) desorption of physisorbed dihydrogen, (ii) dissociation of dihydrogen to give an adsorbed layer and (iii) damping of the response by an increasing Debye–Waller factor.

The vibrational INS spectra of a series of Pt/C catalysts prepared under varying conditions were similar indicating that the same types of site are common to all the catalysts, although the relative proportions of each site are sample dependent. Features at 520, 950 and part of the intensity at 1300 cm⁻¹ are assigned to hydrogen on (1 1 1) faces, in good agreement with single crystal data. The mode at 640 cm⁻¹ is assigned as the doubly degenerate asymmetric stretch of Pt(1 0 0) faces with the symmetric stretch near 550 cm⁻¹.

We assign the bending mode of the on-top site to the feature at 470 cm⁻¹. The Pt–H stretch mode was observed at 2079 cm⁻¹. This is a significant result: this is the first time that hydrogen on the on-top sites has been observed on nanosized platinum particles supported on high surface area carbon black. The width of the INS peak is surprisingly large and may give additional information on the type and relative proportions of the crystallographic faces present on the catalyst particles.     

Heavy metals contribution of non-aqueous fluids used in offshore oil drilling

A monitoring program was performed to investigate heavy metal content alteration due to exploratory drilling for oil using non-aqueous fluids (NAFs) in Brazilian offshore, 900 m deep. Fourteen elements were monitored in 54 sites and it was verified that after drilling activities the average Ba concentration was remarkably increased with respect to background level, even 1 year after the activity. A minor increase in Mn and a moderate increase in Al concentrations were verified. The Cd, Cr, Ni, As, Co, Cu, Pb, V, and Zn concentrations were at the background levels, ca. 1 year after the NAFs drilling materials deposition on the seafloor. The Al, Ba, Cd, Cr, Cu, Ni and Zn mean concentrations were significantly different (P<0.05) between the three sampling operations (cruises) performed, while As, Cd, Fe and Pb presented different mean values according to the distance of the oil well, independent of the sampling operation. Interaction between sampling operation and distance was observed for Mn. In all sediment samples the Hg concentration was below the detection limit (0.07 μg g⁻¹).     

Ärztliche Verantwortung gegenüber Palliativpatienten unter dem neuen Paradigma der Kundenorientierung

Definition of the problem

Establishing a good physician–patient relationship based on mutual trust and professional responsibility is a central element in physicians’ professionalism. Recently, however, there has been considerable debate in the field of medical ethics regarding trends toward an economic approach to medicine, which could potentially undermine healthy doctor–patient relationships. Part of this economic approach to medicine involves viewing the patient as an autonomous customer. But what does the customer role mean for vulnerable patients who are restricted in their autonomy and what effect does it have on the physician–patient relationship?

Arguments

In the following article, we pursue the question whether the physicians’ responsibility and the physician–patient relationship change when the (vulnerable) patient attributes the customer role to him-/herself. The study was conducted within the field of palliative care because terminally ill patients represent an especially vulnerable patient population. We base our argumentation in this article on the results of a qualitative interview study that investigated terminally ill patients’ attitudes regarding the topic “the patient as customer” as well as autonomy and decision-making.

Conclusion

The interview results show that autonomy must be understood in relational terms; furthermore, the analysis of the interviews indicates that the physician plays a crucial role in enabling the patient’s autonomy, regardless of whether patients view themselves as a patient or a customer. Subsequently, we deliberate whether the patients’ statements point to potential changes in the doctor–patient relationship and physicians’ responsibility towards patients. Based on these findings, practical implications for the doctor–patient relationship are considered in regard to the “Ethics of Care”, emphasizing the need for an individualized approach to working with patients, especially those with particularly vulnerable conditions.     

Zum Verbesserungspotenzial schriftlicher Aufklärungsmaterialien zu (bio)medizinischen Forschungsvorhaben – Empirische Analyse von Antragsunterlagen einer Forschungsethikkommission

Background

One of the elementary prerequisites for medical research on and with humans is the patients’ or probands’ informed consent. To ensure informed consent, study participants must be—among other things—provided with high-quality information. We developed criteria to assess and evaluate the quality of various written patient information material.

Methods

Based on a catalogue addressing 117 single criteria, we assessed the quality of 128 randomly selected documents from study proposals submitted to the ethical committee of Luebeck University in 2006. Each criterion refers to one of six quality areas (such as “readability and comprehensibility” or “potential benefit and harm”).

Results

The documents on average satisfied half of the criteria with a range from 20–76% for single items. The area with the highest quality score was “consent form” (64%), while “potential benefit and harm” (35%) was the lowest. Material from drug trials showed a significantly higher quality than that from other study types. Only 21 out of 117 criteria were met in more than 80% of all relevant documents.

Conclusion

The study provides evidence for significant deficits in the information material from basic and clinical research projects presented to one academic research ethics committee. Researchers need support in developing and writing informed consent documents. Our set of criteria could be used to make them more sensitive to the various demands involved.     

Parallel evolution using multi-chromosome cartesian genetic programming

Parallel and distributed methods for evolutionary algorithms have concentrated on maintaining multiple populations of genotypes, where each genotype in a population encodes a potential solution to the problem. In this paper, we investigate the parallelisation of the genotype itself into a collection of independent chromosomes which can be evaluated in parallel. We call this multi-chromosomal evolution (MCE). We test this approach using Cartesian Genetic Programming and apply MCE to a series of digital circuit design problems to compare the efficacy of MCE with a conventional single chromosome approach (SCE). MCE can be readily used for many digital circuits because they have multiple outputs. In MCE, an independent chromosome is assigned to each output. When we compare MCE with SCE we find that MCE allows us to evolve solutions much faster. In addition, in some cases we were able to evolve solutions with MCE that we unable to with SCE. In a case-study, we investigate how MCE can be applied to to a single objective problem in the domain of image classification, namely, the classification of breast X-rays for cancer. To apply MCE to this problem, we identify regions of interest (RoI) from the mammograms, divide the RoI into a collection of sub-images and use a chromosome to classify each sub-image. This problem allows us to evaluate various evolutionary mutation operators which can pairwise swap chromosomes either randomly or topographically or reuse chromosomes in place of other chromosomes.     

Superior Thermoelectric Performance of Textured Ca3Co4−xO9+δ Ceramic Nanoribbons

Calcium cobaltite Ca₃Co_4−xO_9+δ (CCO) is a promising p-type thermoelectric (TE) material for high-temperature applications in air. The grains of the material exhibit strong anisotropic properties, making texturing and nanostructuring mostly favored to improve thermoelectric performance. On the one hand multitude of interfaces are needed within the bulk material to create reflecting surfaces that can lower the thermal conductivity. On the other hand, low residual porosity is needed to improve the contact between grains and raise the electrical conductivity. In this study, CCO fibers with 100% flat cross sections in a stacked, compact form are electrospun. Then the grains within the nanoribbons in the plane of the fibers are grown. Finally, the nanoribbons are electrospun into a textured ceramic that features simultaneously a high electrical conductivity of 177 S cm⁻¹ and an immensely enhanced Seebeck coefficient of 200 µV K⁻¹ at 1073 K are assembled. The power factor of 4.68 µW cm⁻¹ K⁻² at 1073 K in air surpasses all previous CCO TE performances of nanofiber ceramics by a factor of two. Given the relatively high power factor combined with low thermal conductivity, a relatively large figure-of-merit of 0.3 at 873 K in the air for the textured nanoribbon ceramic is obtained.     

Glyphosate Adsorption from Water Using Hierarchically Porous Metal–Organic Frameworks

The selective removal of one ligand in mixed-ligand MOFs upon thermolysis provides a powerful strategy to introduce additional mesopores without affecting the overall MOF structure. By varying the initial ligand ratio, MOFs of the MIL-125-Ti family with two distinct hierarchical pore architectures are synthesized, resembling either large cavities or branching fractures. The performance of the resulting hierarchically porous MOFs is evaluated toward the adsorptive removal of glyphosate (N-(phosphonomethyl)glycine) from water, and the adsorption kinetics and mechanism are examined. Due to their strong affinity for phosphoric groups, the numerous Ti–OH groups resulting from the selective ligand removal act as natural anchor points for effective glyphosate uptake. The relationships between contact duration, glyphosate concentration, and adsorbent dosage are investigated, and the impact of these parameters on the effectiveness of glyphosate removal from contaminated water samples is examined. The introduction of additional mesopores has increased the adsorption capacities by nearly 3 times with record values exceeding 440.9 mg g⁻¹, which ranks these MOFs among the best-reported adsorbents.     

The Donauspital-Stolzalpe concept (Danube Hospital, Vienna, Austria). Corrective osteotomy with selective labrum surgery following preoperative MRI arthrography

Concomitant pathologies (labral lesions, intra-/extra-osseous ganglia and stress bone marrow edema) in adult residual hip dysplasia (RHD) might influence the outcome of conservative hip surgery. The aim of our prospective clinical study was to assess the value of preoperative MR arthrography in diagnosing concomitant lesions and in making surgical decisions in RHD. The first 37 consecutive patients with a minimum follow-up of 18 months have been analysed. All 37 patients presented RHD with the clinical symptomatology of labral lesions and underwent routine preoperative MRA. According to clinical, radiological and MR arthrographical criteria, these 37 patients were subdivided into four therapeutic subgroups: (1) reorientation of the acetabulum using the T?nnis triple pelvic osteotomy (TPO); (2) intertrochanteric varisation osteotomy (IVO); (3) palliative decompression with only symptomatic partial resection of the torn labrum (PALL); (4) primary total hip replacement (TEP). Based on the preliminary clinical and radiological outcomes of these four subgroups, the following conclusions can be drawn: labral lesions are considered to be a sign of chronic joint instability. Therefore, acetabular malorientation should be corrected by redirectional osteotomy of the acetabulum (TPO-subgroup) even in low grades of RHD if labral lesions are present. "Palliative" labral resections without corrective osteotomy (PALL subgroup) in secondary osteoarthritis due to RHD are definitively obsolete, because they rapidly progress to severe osteoarthritis due to surgically accelerated joint instability. In RHD with highly osteoarthritic hip joints and concomitant lesions, one should not hesitate to perform primary THR even in young patients.