Quantitative X-ray powder diffraction analysis of clay minerals in Australian coals using Rietveld methods

The mineralogy of clay-rich mineral matter isolated from a range of Australian bituminous coals has been evaluated in quantitative terms from X-ray powder diffraction (XRD) patterns using a Rietveld-based data processing technique. The chemical composition of coal ash derived from this mineral matter has been calculated and compared to the directly determined composition of the ash prepared from the same coal samples. Although there are some minor differences due in part to uncertainty regarding the actual composition of several minerals, the compositions indicated by the two methods show a relatively high correlation, suggesting that the Rietveld technique provides mineralogical analyses that are consistent with independently determined chemical data. Comparison of the normalised clay mineral percentages from the Rietveld analysis to quantitative interpretations based on a peak intensities in glycolated and heat-treated oriented aggregates of the respective clay fractions also shows a high correlation, confirming mutual consistency of the two different mineralogical analysis methods. Such quantitative mineralogical data are significant to a range of coal exploration, mining and utilization activities, including seam correlation, material handling and ash and slag formation in combustion processes.     

Participatory Modeling Workshops in a Water-Stressed Basin Result in Gains in Modeling Capacity but Reveal Disparity in Water Resources Management Priorities

Participatory modeling workshops were held in Sonora, México, with the goal of developing water resources management strategies in a water-stressed basin. A model of the water resources system, consisting of watershed hydrology, water resources infrastructure, and groundwater models, was developed deliberatively in the workshops, along with scenarios of future climate and development. Participants used the final version of the water resources systems model to select management strategies. The performance of the strategies was based on the reliability of meeting current and future demands at a daily time scale over a year’s period. Pre- and post-workshop surveys were developed and administered. The survey questions focused on evaluation of participants’ modeling capacity and the utility and accuracy of the models. The selected water resources strategies and the associated, expected reliability varied widely among participants. Most participants could be clustered into three groups with roughly equal numbers of participants that varied in terms of reliance on expanding infrastructure vs. demand modification; expectations of reliability; and perceptions of social, environmental, and economic impacts. The wide range of strategies chosen and associated reliabilities indicate that there is a substantial degree of uncertainty in how future water resources decisions could be made in the region. The pre- and post-survey results indicate that participants believed their modeling abilities increased and beliefs in the utility of models increased as a result of the workshops.     

Determination of glass content and estimation of glass composition in fly ash using quantitative X-ray diffractometry

The proportion of amorphous or glassy material in a series of fly ashes has been evaluated by X-ray powder diffraction (XRD) using the Rietveld-based SIROQUANT software package. Several different sample preparation and processing methods were investigated, including XRD analysis of samples spiked with known masses of synthetic corundum and zinc oxide as well as techniques based on analysing the raw or unspiked fly ash directly using the SIROQUANT process. In the latter case, two different poorly crystallised silicate mineral patterns, metakaolin and tridymite, were used in the SIROQUANT processing of the raw ash XRD data to represent the amorphous constituents. The results of the different methods based on XRD of spiked samples were found to be mutually consistent, and also consistent with other published data for an international reference fly ash sample. SIROQUANT analysis of the unspiked fly ashes gave similar results, although different poorly crystallised silicate reference patterns seem to be more suited for ashes from Australian and North American sources.The mineralogy of the ashes, including the proportions of quartz, iron oxide and glassy constituents, appears to be related to the nature of the mineral matter in the relevant feed coals. Calculations based on subtracting the inferred chemistry of the crystalline minerals in the fly ashes from the total fly ash chemistry were also used to estimate the overall chemical composition of the glass fraction in each ash. The results indicate that ashes derived from lower-rank coals in the samples studied have different glass compositions to those derived from higher-rank (bituminous) materials. These different glass compositions appear to be related to several other ash properties, including particle density and particle surface area. Evaluation of glass content and composition may be significant in different aspects of ash utilisation, and also in evaluating interactions with water at ash disposal sites.     

The structural consequences of exchanging tryptophan and tyrosine residues in B.stearothermophilus lactate dehydrogenase

A mutant Bacillus stearothermophilus lactate dehydrogenase hasbeen prepared in which all three tryptophan residues in thewild-type enzyme have been replaced by tyrosines. In addition,a tyrosine residue has been mutated to a tryptophan, which actsas a fluorescence probe to monitor protein folding. The mutantenzyme crystallizes in the same crystal form as the wild-type.The crystal structure of the mutant has been determined at 2.8Å resolution. Solution studies have suggested that thereis little effect upon the mutant enzyme as judged by its kineticproperties. Comparison of the crystal structures of the mutantand wild-type enzymes confirms this conclusion, and revealsthat alterations in structure in the region of these mutationsare of a similar magnitude to those observed throughout thestructure, and are not significant when compared with the errorsin atomic positions expected for a structure at this resolution.     

Good Enough is Good Enough: Overcoming Disaster Response Organizations’ Slow Social Media Data Adoption

Organizations that respond to disasters hold unreasonable standards for data arising from technology-enabled citizen contributions. This has strong negative potential for the ability of these responding organizations to incorporate these data into appropriate decision points. We argue that the landscape of the use of social media data in crisis response is varied, with pockets of use and acceptance among organizations. In this paper we present findings from interviews conducted with representatives from large international disaster response organizations concerning their use of social media data in crisis response. We found that emergency responders already operate with less than reliable, or “good enough,” information in offline practice, and that social media data are useful to responders, but only in specific crisis situations. Also, responders do use social media, but only within their known community and extended network. This shows that trust first begins with people and not data. Lastly, we demonstrate the barriers used by responding organizations have gone beyond discussions of trustworthiness and data quality to that of more operational issues.     

Engineering plastics from lignin. XV. Polyurethane films from chain-extended hydroxypropyl lignin

A series of polyurethane (PU) films was prepared from chain-extended hydroxypropyl lignins (CEHPL). In appearance, these films ranged from brittle and dark brown to rubbery and bronze. The thermal, mechanical, and network properties of these PUs were investigated by DMTA and DSC analysis. All films exhibited single T_g's which varied between ?53° and 101°C, depending on lignin content. From swelling experiments, molecular weight between crosslinks (M _c) was determined and found to vary over 2.5 orders of magnitude. The M _c's were related to the change in T_g that accompanied network formation. Stress–strain experiments showed a variation in Young's modulus between 7 and 1300 MPa. Most of the variation in material properties was related to lignin content and to a lesser extent to diisocyanate type, hexamethylene diisocyanate, or toluene diisocyanate. The source of the CEHPL had no effect on the observed properties. From these results it was concluded that the properties of PUs can be controlled and engineered for a wide variety of practical uses.     

The structure and properties of drawn blends of polyethylene and polypropylene

A series of highly oriented tapes has been prepared from a blend consisting of equal proportions of polyethylene and polypropylene. The mechanical properties and the structure and morphology of the samples have been investigated using DSC, optical microscopy, and wide angle and small angle diffraction, including measurements of crystal strain on samples under stress. It has been confirmed that the blend is incompatible, and a structural model has been proposed which is consistent with the observation that the polyethylene and polypropylene components act essentially independently in their response to external macroscopic stress.     

Lactobacillic and methyl-branched olefinic acids inByrsocarpus coccineus seed oil

A detailed investigation of the seed oil ofByrsocarpus coccineus Schum. and Thonn. has disclosedcis-11,12-methyleneoctadecanoic (lactobacillic) (13%) and two branched octadecenoic acids (0.1%). Other fatty acids in the oil are those normally associated with seed lipids except for an unusually high proportion (12%) ofcis-11-octadecenoic acid. Lactobacillic acid has long been known as a constituent of certain bacterial lipids, but this is the first report of its presence in a seed oil. The branched olefinic acids have not heretofore been found to occur in plants. Mention of firm names or trade products does not imply endorsement or recommendation by the Department of Agriculture over other firms or similar products not mentioned.     

Fatty acid composition of seed oils of the meliaceae,including one genus rich incis-vaccenic acid

The seed lipids of three species ofEntandraphragma (Meliaceae) contain the largest proportion (31–50%) ofcis-vaccenic acid ever found in nature. The acid is not indicative of the family as a whole and is found as a major fatty acid in the seed of only one additional species, besidesEntandraphragma, out of the 30 analyzed from this family. With the total oil comprising between 45 and 62% ofEntandraphragma seed, these species should be considered as a source of undecadioic acid for the production of nylon 11.     

Antimicrobial activity of statistical polymethacrylic sulfopropylbetaines against gram‐positive and gram‐negative bacteria

A series of statistical copolymers derived from 2‐(dimethylamino)ethyl methacrylate with four different hydrophobic comonomers (ethyl, butyl, cyclohexyl, and octyl methacrylates) have been prepared via conventional free radical copolymerization under bulk conditions. The copolymers have been subsequently modified, with 1,3‐propanesultone to yield the corresponding polysulfoproylbetaine derivatives. Those copolymers exhibiting the requisite aqueous solubility have been screened with respect to their antimicrobial activity against two common and notorious pathogens, namely Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). We show that certain copolymers do indeed exhibit antimicrobial activity. The extent of activity is related to the molecular characteristics of the materials such as the molar composition and structure of the hydrophobic comonomer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1036–1041, 2006