Befugnisse der Aufsichtsbehörde gegenüber Rechtsanwälten

Der Beschluss des KG Berlin hat gro?e Beachtung in der Anwaltschaft gefunden. Die Entscheidung ist damit Gegenstand vieler zustimmender Bewertungen. Die folgenden Ausführungen sollen einerseits die Fehler der Entscheidung aufzeigen und andererseits einen Gegenpol zu diesen Auseinandersetzungen darstellen.     

Partially reversible adsorption of annexin A1 on POPC/POPS bilayers investigated by QCM measurements, SFM, and DMC simulations

The kinetics of annexin A1 binding to solid-supported lipid bilayers consisting of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoserine (POPS; 4:1) has been investigated as a function of the calcium ion concentration in the bulk phase. Quartz crystal microbalance measurements in conjunction with scanning force microscopy, fluorescence microscopy, and computer simulations indicate that at a given Ca2+ concentration annexin A1 adsorbs irreversibly on membrane domains enriched in POPS. By contrast, annexin A1 adsorbs reversibly on the POPC-enriched phase, which is composed of single POPS molecules embedded within a POPC matrix. The overall area occupied by the POPS-enriched phase is controlled by the CaCl2 concentration. Monte Carlo simulations suggest that the area of the POPS-enriched phase increases by a factor of 7 when the Ca2+ concentration is changed from 0.01 to 1 mM.     

Polyaza crown ethers as non-nucleosidic building blocks in DNA conjugates: synthesis and remarkable stabilization of dsDNA

The synthesis of amphiphilic polyaza crown ether monomers X (benzyl-substituted), Y (palmityl-substituted) and Z (cholesteryl-substituted) and their incorporation into oligonucleotides are described. Their effects on thermal duplex stability were investigated by UV melting curve analysis in different alkaline metal buffer solutions. Thermal-denaturation experiments showed remarkable stabilization of dsDNA by polyaza crown ether monomers when incorporated in opposite positions. The series of polyaza crown ether monomers (X, Y and Z) with different overall lipophilicities showed a trend of increased stability of the corresponding dsDNA with increasing lipophilicity of the polyaza crown ether monomer. Multiple incorporations of benzyl-substituted polyaza crown ether monomer X as dangling ends on both sides of dsDNA resulted in strongly increased stability of the corresponding duplex.     

Internal and external factors of competitiveness shaping the future of wooden multistory construction in Finland and Sweden

In transitioning to a renewable material-based bio economy, growing public and industry interest is apparent for using wooden multistory construction (WMC) as a sustainable urban housing solution in Europe, but its business implications are not well understood. In our study, we evaluate, which internal and external factors of competitiveness are shaping the future of WMC, especially in the context of Finland and Sweden. Based on a multi-level perspective of socio-technical transitions, we conducted a three-stage dissensus-based Delphi study. The identified internal and external factors affecting the future competitiveness of the WMC business emphasize the importance of skilled architects and builders and the role of standardized building systems. Based on our results, the key aspects influencing the future competitiveness of WMC in the region are related to the development of technical infrastructure and project-based business networks, while additional changes in regulatory framework are perceived as less important. We conclude that towards 2030, the strong cognitive rules founded in the concrete-based building culture in these countries is likely to inhibit the dynamics of the socio-technical regime level. A change is also needed in the WMC business culture towards more open cross-sectoral collaboration and new business networks between different-sized players.     

Characteristics of and selection criteria for support materials for cell immobilization in wastewater treatment

For treatment of wastewater with immobilized cells, support materials need to meet the following criteria: insoluble, not biodegradable, high mechanical stability, high diffusivity, simple immobilization procedure, high biomass retention, minimal attachment of other organisms and preferably a low cost price. In order to compare which support materials are the most suitable, characteristics of several natural and synthetic materials have been determined. For this, both literature and experimental data were used. The immobilization procedures of natural gel materials, like alginate and carrageenan, are mild and cells grow well in these supports. Furthermore, the effective diffusion coefficients of substrates are close to those in water. These supports, however, appeared to be soluble, biodegradable and liable to abrasion. Synthetic gels, on the contrary, have better mechanical properties, but mostly lower substrate diffusion coefficients. Immobilization conditions are less mild resulting in low biomass retention. For application of entrapped nitrifying cells in wastewater-treatment systems synthetic gels, however, are promising.     

Nitrogen in river basins: sources, retention in the surface waters and peatlands, and fluxes to estuaries in Finland

Nitrogen export from diffuse and point sources and its retention in the major river basins of Finland is quantified and discussed. The estimated total export from river-basins in Finland was 119,000 tonnes N a(-1) for the period 1993 to 1998 based on N export from different land use types defined in a GIS-based assessment model, incorporated with estimates of N inputs from atmospheric deposition and point sources. Agriculture contributes 38% of the total export, varying in the range 35-85% in the south-western basins and 0-25% in the northern basins. This estimate of N export from agriculture was based on regional N balances together with data from small agricultural research catchments. Forestry contributes on average 9%, with increasing dominance towards eastern and northern parts of the country: from 2% to 15% in the southern-mid-western Finland basins to 10-30% in the large northern basins. 'Background' N export from forests on both mineral and organic soils contributes 27% on average; in the northern basins it may contribute from 40% up to 90% of the total load. The estimate was calculated based on practically all data available from 42 small, experimental catchments in Finland. Of the total N input to Finnish river-systems, 0% to 68% was retained in surface waters and/or peatlands, with a mean retention of 22%. The highest retention of N (36-61%) was observed in the basins with the highest lake percentages. The lowest retention (0-10%) of N was in the coastal basins with practically no lakes. In the national N mass balance, 38,000 tonnes N a(-1) (32%) was estimated as lake retention and 4,000 tonnes N a(-1) (3%) as retention in peatlands. On the basis of mass balances and sensitivity analysis, retention was in most cases estimated to be in the range of 7.5-12.5 kg ha(-1)a(-1) in lakes and 0-1.5 kg ha(-1)a(-1) in peatlands. The model results were tested using the split-sample technique and uncertainty estimates for different data sources are provided and discussed.     

Immobilization of arsenic in a tailings material by ferrous iron treatment

Weathering and internal dissolution processes in mining waste materials may mobilize elevated levels of arsenic (As), contaminating ground and surface waters. Treating the polluted waters with iron oxyhydroxides is an established remediation method. By contrast, little knowledge is available to stabilize As in source materials by treating it with Fe precipitates and, on this way, to prevent the generation of polluted waters. In the present work the efficiency of Fe(II) treatment on As immobilization in a tailings material (TM) was studied with regard to the Fe:As molar ratio, the influence of CaCO3 amendment, and the As desorption at continued intensive leaching of Fe-treated TM. Fe precipitates were created by aerobic treatment of TM with Fe(II)sulfate at several Fe:As molar ratios with or without adding CaCO3, followed by aging the Fe-treated TM. The As retention in the treated tailings was studied by 4-fold elution with water, and the As desorption kinetics was examined by suspension leaching in laboratory microcosms over 3 weeks. Fe(II) treatment of TM reduced the water-extractable total As to <10 microg/L as the Fe:As molar ratio increased from 0 to 8. The water-soluble As of Fe-treated tailings could be reduced to 10-30 microg/L also under conditions of intensive leaching. Stabilizing the pH with CaCO3 resulted in consistently higher As release. The As desorption data followed the first-order kinetics in the early time stages of the desorption whereas at longer times the parabolic diffusion model was valid.     

Crowdsourcing as a service – from pilot projects to sustainable innovation routines

While crowdsourcing may strengthen a company's innovation performance, it is only rarely embedded in organizations as an innovation practice. Our action research shows that organizations often struggle with crowdsourcing projects as they represent a different form of innovation projects and require additional capabilities and skills e.g., to frame a crowd challenge, deal with IP rights, manage the crowd, or integrate the vast input into innovation projects. To overcome these problems, organizations have to invest in project-led learning to establish easy-to-use templates and routines e.g., to handle offered incentives or the applied winner selection processes. They further need to enable business-led learning as the established innovation structures, processes, and management practices do not cope with crowdsourcing projects and present some rigidities causing high coordination efforts. Organizations that are willing to run a number of consecutive crowdsourcing projects may rapidly improve their capabilities and even come up with scalable crowdsourcing services. Our findings further suggest that crowdsourcing, digital platforms, artificial intelligence, and as-a-service approaches may also add to general project capability building.     

Plasmonic dimer antennas for surface enhanced Raman scattering

Electron beam induced deposition (EBID) has recently been developed into a method to directly write optically active three-dimensional nanostructures. For this purpose a metal-organic precursor gas (here dimethyl-gold(III)-acetylacetonate) is introduced into the vacuum chamber of a scanning electron microscope where it is cracked by the focused electron beam. Upon cracking the aforementioned precursor gas, 3D deposits are realized, consisting of gold nanocrystals embedded in a carbonaceous matrix. The carbon content in the deposits hinders direct plasmonic applications. However, it is possible to activate the deposited nanostructures for plasmonics by coating the EBID structures with a continuous silver layer of a few nanometers thickness. Within this silver layer collective motions of the free electron gas can be excited. In this way, EBID structures with their intriguing precision at the nanoscale have been arranged in arrays of free-standing dimer antenna structures with nanometer sized gaps between the antennas that face each other with an angle of 90°. These dimer antenna ensembles can constitute a reproducibly manufacturable substrate for exploiting the surface enhanced Raman effect (SERS). The achieved SERS enhancement factors are of the order of 10? for the incident laser light polarized along the dimer axes. To prove the signal enhancement in a Raman experiment we used the dye methyl violet as a robust test molecule. In future applications the thickness of such a silver layer on the dimer antennas can easily be varied for tuning the plasmonic resonances of the SERS substrate to match the resonance structure of the analytes to be detected.