Modular high temperature reactor (Modular HTR) contributing the global environment protection

Rapid increasing of the energy demand and the economic growth of the developing countries are threatening to lead to unstable supply of the fossil resources and the aggravation of the global environment. Modular High Temperature Reactor (Modular HTR) is one of the most effective solutions of such problem. The GT-MHR (Gas-Turbine Modular Helium Reactor) is a typical plant of the Modular HTR, which is a high efficiency nuclear power generating plant, combined the Modular HTR having passive safety characteristics with the direct cycle helium gas turbine. It has sufficient potential to contribute the global environment protection with keeping the growing speed of the developing countries.

Fuji Electric joined the international GT-MHR project in January 1997 and has helped to finance it. Fuji Electric, in the behalf of the other participants of this project, introduces the outline of this project and main system of the GT-MHR plant in this paper.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

聚氨酯弹性体电致伸缩性能研究

以聚(己二酸-丁二醇-新戊二醇)酯二元醇、甲苯二异氰酸酯、1,4-丁二醇和三羟甲基丙烷为原料,经聚合得到了一系列聚氨酯弹性体。利用LCR阻抗分析仪研究了所得聚氨酯弹性体的介电性能。在1kHz频率下聚氨酯弹性体的相对介电常数为7左右,相对介电常数随测试频率的增加而降低。采用数字散斑相关测量方法研究了聚氨酯弹性体在电场诱导下的应变─电致伸缩响应之间的关系。结果表明,聚氨酯弹性体在外加高压电场的作用下,随着高压电源的开合,其应变也随之呈现出相应的收缩与回复,其电致伸缩系数随聚氨酯弹性体密度的增加及相对介电常数的减小而降低。     

Therapeutic Targets and Emerging Treatments in Advanced Chondrosarcoma

Simple SummaryChondrosarcomas develop chemoresistance to standard anticancer drugs, making it difficult to control unresectable or metastatic chondrosarcomas. To improve the clinical outcomes of chondrosarcoma, new treatment approaches, such as molecule-targeting agents and immunotherapy, are needed. Recent research has revealed promising biomarkers and therapeutic targets for chondrosarcoma. In addition, several molecule-targeting agents have shown favorable antitumor activities in several clinical studies in patients with advanced sarcomas, including chondrosarcoma. This review summarizes recent basic studies on biomarkers and therapeutic targets and recent clinical studies on treating chondrosarcomas.AbstractDue to resistance to standard anticancer agents, it is difficult to control the disease progression in patients with metastatic or unresectable chondrosarcoma. Novel therapeutic approaches, such as molecule-targeting drugs and immunotherapy, are required to improve clinical outcomes in patients with advanced chondrosarcoma. Recent studies have suggested several promising biomarkers and therapeutic targets for chondrosarcoma, including IDH1/2 and COL2A1. Several molecule-targeting agents and immunotherapies have shown favorable antitumor activity in clinical studies in patients with advanced chondrosarcomas. This review summarizes recent basic studies on biomarkers and molecular targets and recent clinical studies on the treatment of chondrosarcomas.     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Photoacoustic Spectroscopy of Some Energetic Materials

To find an effective laser source to ignite energetic materials, the absorption spectra of some energetic materials are obtained by means of a photoacoustic spectroscopy (PAS). In this experiment, PAS covers the wavelength region of 400 nm-1600 nm in which no other conventional method can take absorption spectra for powdered energetic materials. Photoacoustic spectra of 18 energetic materials are reported. In general, energetic materials tested showed peaks in 600 nm–800 nm and 1400 nm–1600 nm ranges. It is found that the energy required to initiate explosives in the case of ruby laser initiation were correlated with their photoacoustic signal intensities.     

Poly(sulfonated phenylene)-block-poly(arylene ether sulfone) copolymer for polymer electrolyte fuel cell application

Novel poly(2-(3-sulfo)benzoyl-1,4-phenylene)-block-poly(arylene ether sulfone) copolymers (PSP-b-PAESs) were successfully synthesized by Ni(0)-catalyzed copolymerization of 2,5-dichloro-3′-sulfo-benzophenone (DCSB) and chlorobenzophenone-endcapped oligo(arylene ether sulfone). Their physical property, morphology and polymer electrolyte fuel cell (PEFC) performance were investigated compared to those of the DCSB-based random copolymers and Nafion112. PSP-b-PAES with a measured ion exchange capacity (IEC) of 1.82 meq g^?1, of which the hydrophilic/hydrophobic block lengths were evaluated as 17/8.4, showed the relatively small number of water molecules sorbed per sulfonic acid group (λ = 15) in water and the anisotropic membrane swelling with 2.4 times larger through-plane swelling than in-plane one, whereas it showed the almost isotropic proton conductivity. The PSP-b-PAES exhibited a microphase-separated structure composed of hydrophobic and hydrophilic domains, whereas the random copolymers exhibited a homogenous morphology. The PSP-b-PAES had the larger proton conductivity than the random copolymer with an IEC of 2.01 meq g^?1, especially under the low relative humidities. Even at a low humidification of 17% RH at 90 °C and 0.2 MPa, the PSP-b-PAES exhibited the high PEFC performance; namely, cell voltage of 0.69 V at load current density of 0.5 A cm^?2 and maximum output of 0.73 W cm^?2, which were much higher than those at 30% RH for the random copolymer (0.65 V and 0.51 W cm^?2) and Nafion112 (0.70 V and 0.61 W cm^?2). The PSP-b-PAES showed the fairly high durability of 750 h under PEFC operation at 90 °C in spite of the relatively low molecular weight. PSP-b-PAESs have the high potential as polymer electrolyte membrane for PEFC applications.     

Supplemental Literature Review of Binary Phase Diagrams: Cs-In, Cs-K, Cs-Rb, Eu-In, Ho-Mn, K-Rb, Li-Mg, Mg-Nd, Mg-Zn, Mn-Sm, O-Sb, and Si-Sr

Recent literature on Cs-In, Cs-K, Cs-Rb, Eu-In, Ho-Mn, K-Rb, Li-Mg, Mg-Nd, Mg-Zn, Mn-Sm, O-Sb, and Si-Sr phase diagrams is reviewed in this article in order to update the 1990 compilation Binary Alloy Phase Diagrams, 2nd edition, by T.B. Massalski, et al. For some systems reaction tables and crystal structure data have been included, as well. Diagrams have been checked for consistency with rules for phase diagram construction and modified when necessary. In addition, diagrams needing more work have been identified.