Application of SPRT to an image data sequence for a remote monitoring system

Recently, remote monitoring camera systems have been widely used for security. In such systems, one important function is that the system automatically detects any change in the scenes from the monitoring cameras. In wireless remote monitoring camera systems, the images of the scenes are generally transmitted as compressed data (e.g., JPEG file), because of the capacity of the wireless channel. This article shows the automated detection of the change point in time-series data of compressed JPEG file quantity (Kbytes) from the monitoring camera by applying the sequential probabilistic ratio test (SPRT) and the Chow test, which is well known as a standard method for detecting structural change in time-series data.     

Thermally assisted recording of holographic gratings in semicrystalline azobenzene-containing polymers

We examine optically induced birefringence in semicrystalline azopolymer films that are held at glass-transition temperature Tg. The birefringence increases markedly after interception of the pump beam; the saturation value depends on exposure time. In addition, the induced birefringence is completely erased by irradiation with a circularly polarized beam at Tg. Using this thermally assisted method, we demonstrate the holographic recording of a test image. The intensity of the diffracted beam also increases after interception of the writing beams. Furthermore, the retrieved image is found to have a resolution of approximately 30 lp/mm. This resolution is comparable with that of the optical setup that is used. Accordingly, the thermally assisted recording by use of semicrystalline azopolymers is a promising method for reversible holographic storage.     

ATR artificial brain project: 2004 progress report

This article presents the key assumptions and current status of the ATR Artificial Brain Project being undertaken to create Volitron, a device equipped with circuitry that enables the emergence of thought. Such thought would be recognized from Volitron's specific communication behaviors. The project consists of three complementary themes: psychodynamic architecture, brain-specific evolvable hardware, and the management of brain-building. The psychodynamic architecture is designed to develop automatically, driven by “pleasure” coming from discharges of tension gathered in special tension-accumulating devices. Tension-discharging patterns come first of all from the robot's interactions with its care giver/provider. For the dedicated hardware, we developed qcellular-automata (qCA), in which groups of uniform logic primitives (q-cells) serve as spike-train-processing units, as well as pulsed para-neural networks (PPNN) that can be evolved, using fuzzified signals and a genetic algorithm combined with hill climbing, and converted into qCA. The psychodynamic ideas were tested using three robots: Neko, equipped with a pleasure-driven associator, Miao, equipped with MemeStorms (a special working memory in which conflicting ideas fight for access to the long-term memory and actuators), and Miao+, whose brain is equipped with a growing neural network. This work was presented in part at the 9th International Symposium on Artificial Life and Robotics, Oita, Japan, January 28–30, 2004     

Immunohistochemical quantitation for extracellular matrix proteins in rats with glomerulonephritis induced by monoclonal anti-Thy-1.1 antibody

During clot retraction, platelets interact with fibrin resulting in marked reduction of clot volume. Altered fibrin structure has been reported to affect clot retraction as measured by serum expression. This study was performed to test whether such altered retraction was the result of increased resistance to network collapse or due to decreased force development by platelets. Altered fibrin structure was documented as variation of fibre mass/length ratios (mu) and shifts in clot elastic modulus. The force developed by platelets during clotting was measured directly. Increasing the fibrinogen concentration led to thinner fibre formation (decreased mu), and a linear increase in gel elastic modulus. Over a fibrinogen concentration range of 100 to 400 mg/dl, force development was minimally affected. Force development and clot elastic modulus increased in a linear fashion with increasing platelet concentration. Increasing the calcium concentration from 5 to 20 mM caused a 160% increase in fibrin fibre size (mu), and a 52% decline in clot modulus. Force developed at 1200 s declined by 17%. At 15 mg/ml, dextran and hydroxyethyl starch (HES) also increased mu, and decreased clot modulus; however, both agents markedly reduced force development. Increasing ionic strength or the addition of IgG decreased mu and increased gel elastic modulus. Force development increased modestly with increased ionic strength, did not change with addition of IgG in saline and declined with addition of IgG in maltose. This study indicates that force development is primarily dependent on platelet function while clot modulus depends on both fibrin structure and platelet function.(ABSTRACT TRUNCATED AT 250 WORDS)     

Studies on dry spinning. I. Fundamental equations

One difficulty in analyzing the state of filament in the dry spinning process is that in the boundary conditions required to solve the equations of mass, momentum and energy which are derived on the consideration of balance with respect to infinitesimally small element are not given a priori. The equations which include these boundary conditions in themselves are derived by considering mass, momentum, and energy balances with respect to the entire cross section of filament. These additional macroscopic equations are simplified to a great extent by assuming the flat velocity profile through the cross section of filament. Besides, in the steady state, these macroscopic equations are modified to give the equations of average solvent content, spinning tension, cross-sectional area, and average temperature. When the spinning conditions are given and the physical constants are measured for a given polymer and solvent system, it becomes possible to calculate the state of filament by solving these microscopic and macroscopic equations simultaneously without resorting to actual spinning.     

Thermal resistance in Speer carbon resistors below 1 K

Temperature dependences of Speer carbon resistors between 30 mK and 4.2 K have been measured. The applied electric power at which the resistance decreases by 1% was measured accurately over the same temperature range. From these data, discussions of the thermal resistance of the resistors are made in detail. Some techniques to measure carbon resistance below 1 K, including the method to remove heat leaks, are described.     

Three-dimensional expression of adhesion molecules on the superficial synovial intima of LPS-induced arthritis of the mouse knee analyzed by immuno-SEM

Three-dimensional microlocalization of adhesion molecules, i.e. ICAM-1 (intercellular adhesion molecule), VCAM-1 (vascular adhesion molecule), LFA-1 (lymphocyte function-associated antigen), Mac-1 (macrophage differentiation antigen) and VLA-4 (very late activation antigen), expressed on type-A synoviocyte (macrophage-like cell) and type-B synoviocyte (fibroblast-like cell), were detected by immuno-scanning electron microscopy (SEM) to investigate the immunoreactive microenvironment of the superficial synovial intima in lipopolysaccharide (LPS)-induced arthritis of the mouse knee. Type-B synoviocytes extended rich slender processes from the periphery and constructed a cytoplasmic network, to which ICAM-1 was restricted. VCAM-1 was expressed only in the LPS-stimulated group and was relatively limited to the microvilli of type-B synoviocytes. Type-A synoviocytes were located randomly among the network with a smoother surface and expressed Mac-1 and LFA-1, which were counter-receptors for ICAM-1, and VLA-4 for VCAM-1 on the microvilli or lamellipodia. Three-dimensional microlocalization of adhesion molecules suggests that the network constructed by cytoplasmic processes and microvilli of type-B synoviocytes forms the pathway for the migration or the foothold for the fixation of type-A synoviocytes and takes part in forming an immunoreactive environment in the articular cavity.